Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, WAVEGUIDE

Active
SPE7M1-26-U-4876Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SEAL, WAVEGUIDE item with NSN 5985-01-273-2187 and part number 2904471-1, supplied by Raytheon Company under a total small business set-aside. The requirement is for twenty units to be delivered FOB origin within 156 days, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and markings per MIL-STD-129 without special identifiers. The item is classified as a critical application and must adhere to stringent environmental and safety standards: the use of ozone-depleting substances is strictly prohibited unless explicit written approval from the contracting officer is obtained, and mercury or mercury compounds are banned from direct contact with the hardware except in narrowly defined exceptions such as functional batteries or specified instruments, which must include secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and cybersecurity requirements mandate a CMMC Level 2 self-assessment. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances allowed unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract falls under DLA Direct, CONUS, and the unit of issue is each (EA), with pricing and contract details tied to purchase request 1000238939. All provisions are subject to the DLA master document revision effective on the solicitation issue date, and the solicitation is set aside for small business concern under NAICS code 334220.

General Info

Twenty SEAL, WAVEGUIDE units procured from Raytheon under small business set-aside, FOB origin, strict environmental and CMMC Level 2 requirements.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7M1-26-U-4876.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,WAVEGUIDE
SEAL,WAVEGUIDE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
SPE7M1-26-U-4876
SECTION B
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
RAYTHEON COMPANY 3B150 P/N 2904471-1
RAYTHEON COMPANY 54X10 P/N 2904471-1
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000238939 0001 EA 20.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5985012732187
DELIVERY (IN DAYS):0156
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:D3 OPI:O INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

SPE7M1-26-U-4876 NSN/Part Number: 5985-01-273-2187 Quantity: 20 EA Purchase Request: 1000238939QTY: 20 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
ATTENUATOR, FIXED
Solicitation # SPE7M1-26-U-4963
The contract specifies the procurement of a fixed attenuator identified by NSN 5985-01-054-2059 and part number M3933/16-03N, which must comply precisely with MIL-DTL-3933 specifications; no commercial substitutes are permitted. The item is classified as a commercial item and a critical application item, subject to strict quality and sourcing controls. All components must originate from qualified manufacturers or products listed on the applicable QPL/QML, and the offeror is bound to supply only those qualified sources. The item must not contain intentional mercury or mercury compounds except in specific exempted cases such as functional batteries or instruments as defined by NAVSEA, and must meet additional containment requirements for portable fluorescent lamps and instruments. The use of class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the contracting officer. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the item is subject to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances required unless otherwise stated, with attributes assigned specific verification levels or AQLs. Packaging and marking shall conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging guidelines. The item is to be delivered FOB origin within 73 days with no variance in quantity, inspected and accepted at destination, and the unit of issue is each (EA) at a unit price of $47.00 for a total of 47 units. This acquisition falls under DLA Direct, CONUS coverage and is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
RADOME, POLARIZER
Solicitation # SPE7M5-26-Q-0829
The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
VOLTMETER
Solicitation # SPE7M1-26-U-4987
The contract specifies the procurement of 33 voltmeters with NSN/Part Number 6625-01-032-2524 under solicitation SPE7M1-26-U-4987, issued by the Department of Defense's Maritime Supply Chain with a total small business set-aside designation. Delivery is required within 71 days of award, and all suppliers must comply with DLA packaging requirements and technical quality standards referenced through the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and critical major and minor attributes must correspond to verification levels VII IV and II or AQLs of 0.1 1.0 and 4.0 respectively. Unspecified attributes are treated as major, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. No data is available for the part, so the alternate offeror must submit a complete data package including details for both the approved and alternate parts. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the NAICS code is 334220 for electronic instrument manufacturing. All government identification must be removed from non-accepted supplies. Primary point of contact is Bryan Fair at DLA with contact details provided.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-T-078D
The contract solicits two units of a radio frequency amplifier identified by NSN 5996-01-464-6320 with a delivery requirement of 168 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The solicitation incorporates DLA packaging requirements and applies to covered defense information, requiring compliance with all cited technical data even if incomplete. Configuration changes must follow formal Engineering Change Proposal and Variance procedures, and any non-accepted supplies must have government identification removed prior to submission. The solicitation number is SPE7M5-26-T-078D, issued on August 4, 2026, with responses due by August 7, 2026, under NAICS code 334220, and performance is required at Tinker AFB with a zip code of 73145-8000. Primary point of contact is Jeanette Heisey, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-367K
The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-367D
This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
LINE, RADIO FREQUENCY T
Solicitation # SPE7M5-26-T-367Q
The contract pertains to the procurement of four units of a radio frequency transmission line with NSN 5985-01-641-7020, sourced from TELEDYNE DEFENSE ELECTRONICS, LLC under solicitation SPE7M5-26-T-367Q. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must comply with MIL-STD-2073-1E packaging standards, including unit packaging code U, and marking per MIL-STD-129 with no special marking codes. Packaging must align with DLA packaging requirements, and hazardous material handling follows IP025 guidelines. The shipment must be sent via traceable freight to the specified military address at Camp Lejeune, North Carolina, and parcel post is strictly prohibited. The contract mandates adherence to CMMC Level 2 cybersecurity self-assessment requirements and incorporates covered defense information protocols. All technical and quality specifications referenced are governed by the DLA Master List, with the applicable revision determined by the solicitation issue date. The purchase request number is 7017726969, unit price is $4.00 per unit, totaling $16.00, and the original required delivery date is July 31, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA ELEMENT
Solicitation # SPE7M1-26-U-5044
The contract solicits 551 antenna elements with NSN 5985-01-642-3300 under solicitation number SPE7M1-26-U-5044, with a required delivery deadline of 90 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The offeror must submit a complete data package covering both the approved and alternate parts since no data is currently available. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Maritime Supply Chain office. Primary point of contact is Bryan Fair, reachable via email and phone provided. The procurement is federal in nature and accessible through the DIBBS system.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, FIXED
Solicitation # SPE7M5-26-T-367A
The contract pertains to the procurement of one fixed attenuator identified by NSN 5985-01-355-4731 under solicitation SPE7M5-26-T-367A, with a delivery requirement of ten days after order issuance to Camp Lejeune, NC, under FOB origin terms. The item is subject to stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by 'R' or 'I' numbers, which take precedence over commercial standards where applicable. Packaging, marking, and labeling must adhere to MIL-STD-129 for barcoding and shipment identification, FED-STD-313 for hazardous materials, and RP001 for palletization, with ASTM D3951 governing non-hazardous commercial packaging only in the absence of stricter DLA requirements. The contract mandates full compliance with cybersecurity obligations under DFARS 252.204-7012 and 252.204-7018, including the safeguarding of covered defense information and prohibition on acquiring certain telecommunications equipment, with deviations in effect through 2026-O0025 and 2026-00038. Contractors are required to comply with NIST SP 800-171 assessment requirements, provide UEI and CAGE codes, and submit all documentation through DIBBS by the August 17, 2026 deadline, with payment processed exclusively via WAWF using electronic invoice and receiving reports. Inspection and acceptance occur at the destination, governed by FAR 52.246-2 and DFARS Appendix F, and the fixed-price contract structure is established through referenced FAR clauses, including changes, default, and inspection provisions. Offerors must certify their size status and socioeconomic classifications, and any representation regarding covered defense telecommunications equipment triggers additional disclosure obligations. All documentation, including hazard warning labels and compliance with the prohibition on hexavalent chromium and hazardous material storage, must be submitted prior to award, and failure to meet any technical, quality, or cybersecurity requirement may result in rejection. The contract contains no pricing data, and no evaluation factors or award basis are explicitly defined, suggesting a potential LPTA approach under simplified acquisition procedures governed by FAR 52.213-4.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, FIXED
Solicitation # SPE7M5-26-T-367B
The contract is for a fixed attenuator with NSN 5985-01-725-0387, requiring one unit to be delivered within 10 days of award under purchase request 7017726952. The solicitation number is SPE7M5-26-T-367B, issued on August 4, 2026, with responses due by August 17, 2026, and is classified under NAICS code 334220. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided web address, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The product must comply with DLA packaging requirements and all data submissions must include complete documentation for both the approved and alternate parts. The government identification must be removed from non-accepted supplies. The place of performance is Camp Lejeune, North Carolina, 28542, and the primary point of contact is Matthew Stanko, reachable via email at fmtewiq@dla.mil or phone at 3128507245. The acquiring activity is the Active Devices Division under the Department of Defense.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-185T
The contract pertains to the procurement of 20 units of a radio frequency interference filter identified by NSN 5915-01-199-7174 under solicitation SPE7M5-26-T-185T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 244 days of award, with performance taking place at Tinker Air Force Base, Oklahoma. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, and is classified under NAICS code 334220 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined based on the acquisition size and solicitation amendment history. For simplified acquisitions, the revision in effect on the solicitation issue or award date applies, while large acquisitions follow the RFP issue date unless a later amendment governs. The contract incorporates DLA packaging standards and applies to covered defense information. Government identification must be removed from non-accepted supplies. Primary point of contact is Matthew Stanko at fmtewiq@dla.mil.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
DUMMY LOAD, ELECTRICAL
Solicitation # SPE7M1-26-U-4940
This contract solicits a dummy load, electrical item designated by NSN 5985-00-111-3503, with a required quantity of 50 units to be delivered within 150 days FOB origin. The item must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with specified verification levels for critical, major, and minor attributes. Mercury or mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, and marking, except for limited functional uses such as in batteries, fluorescent lights, sensors, weapon systems, or specific reagents approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is prohibited without explicit written approval from the contracting officer, and this restriction overrides any conflicting specifications. The vendor must adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements with no special marking codes required. The contractor must also comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and the acquisition is designated as a total small business set-aside under FAR 19.5, with full and open competition applicable. Technical data referenced is incomplete and provided for informational purposes only, but delivery must fully meet all functional and part-number-specific requirements outlined in the solicitation. Delivery is subject to zero quantity variance, with inspection and acceptance occurring at the destination, and preservation methods must exclude any mercury-based materials.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M1-26-U-5045
The contract pertains to the procurement of 11 backshells, electrica, with NSN 5935-01-662-6813, under solicitation number SPE7M1-26-U-5045, issued by the Department of Defense through the Maritime Supply Chain. The requirement mandates compliance with DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issuance or award date depending on acquisition size. The offeror must provide a complete data package for both the approved and alternate parts, as no specific data is available, and must adhere to government directives regarding the removal of government identification from non-accepted supplies and physical identification or bare item marking. Delivery is required within 94 days of award, and the solicitation closes on August 19, 2026, with responses due by that date. The primary point of contact is Bryan Fair, reachable via email and phone, and further details are accessible through the DIBBS portal. The NAICS code 334417 classifies this as an electrical equipment manufacturing activity, and the contract is open to federal suppliers under a standard procurement process without a specified set-aside classification.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M1-26-U-5046
The contract pertains to the procurement of a shell electrical connector identified by NSN 5935-01-673-8169 and part number 30-334RNJD, with a quantity of 51 units. The item is designated as a critical application and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which govern all aspects of compliance including sampling, marking, and packaging. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Mandatory compliance includes adherence to MIL-STD-129 for marking and labeling, and packaging must conform to RP001 DLA Packaging Requirements, with hazardous materials subject to FED-STD-313 and IP025 standards while non-hazardous items must meet ASTM D3951, though DLA requirements override ASTM. The use of any Class I ozone-depleting substances is strictly prohibited in manufacturing or processing unless explicit written approval from the contracting officer is obtained. The item must be delivered FOB origin within 36 days with no tolerance variance in quantity, inspected and accepted at destination. Only approved sources may be submitted, and any change in part number or superseding item requires prior documentation and approval from the original manufacturer. The unit of issue is each (EA) and the total price is based on $51.00 per unit, with delivery assigned under DLA Direct CONUS coverage. All contractual obligations supersede general commercial standards where conflicts arise, and compliance with DLA’s master list is absolute.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336419
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M1-26-U-4880
The contract is for a heater, thermal release item identified by NSN 5999-00-504-9617 and partial numbers 9104H3926 and 167576 from DRS Naval Power Systems Inc and Northrop Grumman Systems Corporation respectively. It is a small business set-aside solicitation under contract number SPE7M1-26-U-4880 with a total quantity of 74 units at a unit price of $74.00, for a total value of $5,476. Delivery is required FOB origin within 118 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E using method 41 for preservation, with materials specified for wrapping and containment as defined. Marking must adhere to MIL-STD-129 with no special marking codes applied. The item is classified as a critical application and must not contain intentionally added mercury or mercury compounds, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. The contract falls under a DLA Direct, CONUS coverage type and is part of the Department of Defense’s Maritime Supply Chain procurement efforts.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-U-4926
The contract is for the procurement of a transformer, power, under solicitation SPE7M1-26-U-4926, with a total quantity of 27 units at a unit price of $27.00, for a total price of $729.00. The item is identified by NSN 5950-01-562-1374 and part number 500K3296, and is subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must comply with RP001, MIL-STD-129 labeling, and Fed-Std-313 guidelines, requiring commercial packaging if non-hazardous or specific hazardous material handling if applicable. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with a 130-day delivery window, and inspection and acceptance occur at the destination. This is a total small business set-aside under NAICS code 335311, issued by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the point of contact. The solicitation opened on August 4, 2026, and responses are due by August 19, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M1-26-U-5023
The contract pertains to the procurement of electrical grounding strips under solicitation SPE7M1-26-U-5023, with a total quantity of 45 units at a unit price of $45.00, totaling $2,025.00. The item is identified by NSN 5999-01-308-8645 and is classified as a small business set-aside under NAICS code 334413. Delivery is required within 146 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including marking per MIL-STD-129 without special markings, and palletization in accordance with specified DLA standards. Hazardous materials packaging is governed by IP025, and mercury or mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, sensors, weapons, or chemically specified reagents by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification levels. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with the controlling revision determined by the solicitation or award date. The contract is issued by the Department of Defense’s Maritime Supply Chain under the DLA Direct, CONUS delivery model, and includes multiple approved suppliers offering the same part number.
Semiconductor and Related Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M1-26-U-4973
The item is a radio frequency interference filter with NSN 5915-00-828-8336, quantity of 26 units, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item cannot be disclosed or transferred to foreign persons, regardless of location, and requires prior authorization from the Department of State or Department of Commerce. Export control obligations extend to foreign national employees and subsidiaries of U.S. companies. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. Compliance with DFARS 252.225-7048 is required. The request is part of a small business set-aside solicitation issued by the Department of Defense under solicitation number SPE7M1-26-U-4973, with a response deadline of August 19, 2026, and a delivery requirement of 120 days after delivery order. The contracting office is the Maritime Supply Chain, with Bryan Fair as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FREQ
Solicitation # SPE7M1-26-U-5010
This contract pertains to the procurement of an audio frequency transformer identified by NSN 5950-01-182-2518 and designated as a commercial item, with three approved manufacturer part numbers: 9-305-5 by Automation Products Group, Inc., C8839-5 by Lockheed Martin Corporation, and X-1297-1 by INRCORE, LLC. The item is classified as a critical application item with strict compliance requirements under DLA packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and adherence to RP001 for procurement packaging. The transformer must be delivered FOB origin within 88 days with zero quantity variance, and inspection and acceptance occur at the destination. The packaging must reflect special handling instructions due to fragility, including fragile labeling and arrow-up orientation, as terminals are susceptible to damage. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award dates. The contract is issued under SPE7M1-26-U-5010, with a total quantity of 73 units and a direct delivery requirement under DLA Direct, CONUS coverage.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-26-U-5018
This contract is for the procurement of a solid state relay, identified by NSN 5945-01-450-4840 and part number 144600 from SETRA SYSTEMS, INC., under solicitation SPE7M1-26-U-5018. The item is classified as a critical application component with a delivery requirement of 51 days FOB origin, and the contracted quantity is 58 units at a unit price of $58.00, resulting in a total price of $3,364.00. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product or its direct contact, except under specific exemptions for functional uses in batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is subject to DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with additional directive to apply IPC/JEDEC J-STD-609 lead finish markings to each unit package to identify Pb or Pb-free attributes, following specified placement guidelines. Inspection and acceptance occur at destination, with zero variance allowed in quantity. This is a Women-Owned Small Business set-aside solicitation under NAICS code 334418, managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the primary point of contact.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
ABSORBER, OVERVOLTAG
Solicitation # SPE7M1-26-U-5030
The contract specifies the procurement of 46 units of an absorber designed for overvoltage protection, identified by NSN 5920-01-503-2533 and linked to purchase request 1000238984. The item must comply with strict restrictions regarding mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware or supplies unless used functionally in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and equipped with a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Packaging must meet DLA’s RP001 requirements, and all technical and quality standards referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M1-26-U-5030 with a response deadline of August 19, 2026, and requires delivery within 94 days after award. The primary point of contact is Bryan Fair at the Maritime Supply Chain under the Department of Defense, and the NAICS code is 335313. For non-accepted supplies, the alternate offeror must provide a complete data package including documentation for both approved and alternate parts.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M1-26-U-4967
This contract pertains to the procurement of sensitive switches under solicitation SPE7M1-26-U-4967, issued by the Department of Defense through the Maritime Supply Chain organization. The items specified are identified by precise part numbers from authorized suppliers including Hensoldt Sensors GmbH, Honeywell, BAE Systems, Safran Power USA, and others, all of which must meet exact technical and quality standards aligned with the DLA Master List of Technical and Quality Requirements. The contract imposes strict controls on configuration management, prohibits the intentional incorporation of mercury or mercury-containing compounds except for specific functional exceptions such as batteries, lamps, or instruments governed by NAVSEA 5100-003D, which further require shock-proof design and secondary containment. The product must conform to referenced technical data beyond the listed part numbers, and all items are classified as critical application components requiring compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. A total of 42 units are requested at $42.00 per unit for a total price of $1,764.00, with zero variance allowed in quantity and delivery scheduled 140 days from award, delivered FOB origin to destination inspection and acceptance. Packaging must utilize D3 containers, dry preservative methods, and no cushioning materials, with marking strictly adhering to standard protocols and no additional special codes. The solicitation is a total small business set-aside under NAICS code 335931 and was posted on August 4, 2026, with responses due by August 19, 2026. Contract administration and inquiries are managed by Bryan Fair of DLA, and all data and units of issue must be cross-referenced with official DoD and ANSI X12 standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details