SEALING COMPOUND

SEALING COMPOUND
SEALING COMPOUND
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
SPE8ES-26-T-2887
SECTION B
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html The AMSC was changed to C. At the time of the update the Material Master was critical and/or weapons code. Do not change the AMSC to A or H.
AMSC was change to Z as the material was coded a commercial-off-the-shelf in the Material Master at the time of this update. Do not change the AMSC to A or H.
U/I = KT
SIZE: A QUART KIT, CONSISTING OF 24 FL OZ BASE MATERIAL AND THE
REQUIRED AMOUNT OF CURING AGENT IN SEPARATE CONTAINERS.
IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-PRF-8516G
TYPE II: HIGH VISCOSITY
CLASS 3: 72 HR CURE @ 77 DEG. F
CATEGORY A TWO-COMPONENT KIT
ADDITIONAL REQUIREMENTS:,,
1. MIL-STD-129 LABEL WILL ALSO INCLUDE LOT OR BATCH NUMBER,,
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
RS009: Shelf-life requirement RS001 for a TYPE I (CODE G) item with a shelf life of 9 months (non-extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-8516G(1) NOT 1 REVISION NR G DTD 07/24/2019 PART PIECE NUMBER: MIL-PRF-8516 TY2CL3KT3
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-8516-25 NOT 1 REVISION NR 25 DTD 01/07/2008 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8ES-26-T-2887
SECTION B
PR: 7018561905 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018561905 0001 KT 1.000
NSN/MATERIAL:8030006848790
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Separate base material shall be furnished in the specified quantities in compound lined, double-seamed end cans with multiple friction closure of the type normally used for this product, and curing agent shall be furnished in the specified quantities in resealable, resin-lined cans, glass, or plastic containers. There will be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The containers shall not spill or leak during shipment, handling, storage, and redistribution. Packaged components shall be further wrapped, boxed, or containerized together (hot-melt method alone not acceptable) as a complete unit in kit form so that they shall not accidentally separate during shipment, handling, storage, and redistribution. Sealed containers shall be moisture-proof.
Less than 1 gallon (127 fl.oz.) kit of material. MIL STD 129 label required on each assembled kit. Intermediate container will be a D3 box (4G box if hazardous) and braced with proper dunnage to prevent damage and movement. Itemized list of contents required.
- Option A: All contents making up one kit will be placed in a E6 box and braced with proper dunnage to prevent damage and movement.
- Option B: Kits that contain 32 fl.oz. or less of material will be packaged by way of either: a heavy weight clear plastic bag, heat-shrink method, heat-sealed method, or blister pack method.
- Option C: Cans only. Adhesive disk with adhesive properties of at least equal strength of the containers being bonded will be used to bond containers together creating a singular and complete entity (kit).
- Option D: Cans only. Heat-shrink with bonding properties that would keep the cans secure before any damage to the cans would occur. Bonded containers together create a singular and complete entity (kit).
*EACH KIT MUST HAVE A MIL-STD-129 LABEL
SPE8ES-26-T-2887
SECTION B
PR: 7018561905 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
954412
HAZMAT SOUTH TEXAS LIGHTHOUSE BLIND
BUILDING 188
188 CRAWFORD ROAD
NAS MERIDIAN MS 39309
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
954412
HAZMAT SOUTH TEXAS LIGHTHOUSE BLIND
BUILDING 188
188 CRAWFORD ROAD
NAS MERIDIAN MS 39309
US
M/F: (TCN) 9544126058010E
RDD:
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 00
Need Ship Date:00/00/0000 Original Required Delivery Date:03/04/2026
SPE8ES-26-T-2887 NSN/Part Number: 8030-00-684-8790 Quantity: 1 KT Purchase Request: 7018561905QTY: 1 Delivery: 5 days ADO