SEALING COMPOUND

SEALING COMPOUND
SEALING COMPOUND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS
(CIDS) MAY BE OBTAINED FROM THE WEB SITE
http://quicksearch.dla.mil/ http://quicksearch.dla.mil/
COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT (THAT IS, 1 OF 2, 2 OF 2, ETC.)
CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS WITHIN THE KIT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
SPE8ES-26-T-2623
SECTION B
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
UI = KT KT = 1 GALLON TOTAL MIXED VOLUME KITS CONSISTING OF BASE RESIN
AND CURING AGENT PACKAGED IN SEPARATE CONTAINERS. PACKAGED COMPONENTS
SHALL BE FURTHER BOXED TOGETHER AS A COMPLETE UNIT IN KIT FORM SO THAT
THEY SHALL NOT ACCIDENTALLY SEPARATE DURING SHIPMENT. DESCRIPTION IN
ACCORDANCE WITH COMMERCIAL ITEM DESCRIPTION A-A-59293 DATED JULY 21,
1998, A TWO-PART, POLYSULFIDE-BASED ADHESIVE-SEALANT FOR BONDING METAL
TO METAL OR GLASS TO METAL OPTICAL INSTRUMENTS OR FIRE CONTROL SYSTEMS.
KIT PACKAGING: SEPARATE BASE MATERIAL SHALL BE FURNISHED IN THE
SPECIFIED QUANTITIES IN COMPOUND LINED, DOUBLE-SEAMED END CANS WITH
MULTIPLE FRICTION CLOSURE OF THE TYPE NORMALLY USED FOR THIS PRODUCT,
AND CURING AGENT SHALL BE FURNISHED IN THE SPECIFIED QUANTITIES IN
RESEALABLE, RESIN-LINED CANS, GLASS, OR PLASTIC CONTAINERS. THERE WILL
BE NO INTERACTION CHEMICALLY OR PHYSICALLY WITH THE CONTENTS WHICH WOULD
DAMAGE THE CONTAINER OR ALTER THE STRENGTH, QUALITY, OR PURITY OF THE
CONTENTS. THE CONTAINERS SHALL NOT SPILL OR LEAK DURING SHIPMENT,
HANDLING, STORAGE, AND REDISTRIBUTION. PACKAGED COMPONENTS SHALL BE
FURTHER BOXED TOGETHER (HOT-MELT METHOD ALONE NOT ACCEPTABLE) AS A
COMPLETE UNIT IN KIT FORM SO THAT THEY SHALL NOT ACCIDENTALLY SEPARATE
DURING SHIPMENT, HANDLING, STORAGE, AND REDISTRIBUTION. SEALED
CONTAINERS SHALL BE MOISTURE-PROOF.
TDP Rev A Gen 1 IAW BASIC CID A-A-59293 NOT 4 REVISION NR DTD 08/07/2023 PART PIECE NUMBER: A-A-59293 (1 GL KIT)
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
SPE8ES-26-T-2623
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017987997 0001 KT 2.000
NSN/MATERIAL:8030006561042
DELIVERY (IN DAYS):0077
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:001
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
TOS CODE = D
TEMPERATURE FOR STORAGE (TOS) CODE = 60-80 DEG F
UI = KT
KT = 1 gallon total mixed volume kits consisting of base resin and curing agent packaged in separate containers. Packaged components shall be further boxed together as a complete unit in kit form so that they shall not accidentally separate during shipment.
KIT PACKAGING: Separate base material shall be furnished in the specified quantities in compound lined, double-seamed end cans with multiple friction closure of the type normally used for this product, and curing agent shall be furnished in the specified quantities in resealable, resin-lined cans, glass, or plastic containers. There will be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The containers shall not spill or leak during shipment, handling, storage, and redistribution. Packaged components shall be further boxed together (hot-melt method alone not acceptable) as a complete unit in kit form so that they shall not accidentally separate during shipment, handling, storage, and redistribution. Sealed
SPE8ES-26-T-2623
SECTION B
PR: 7017987997 PRLI: 0001 CONT’D
containers shall be moisture-proof.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:00/00/0000 Original Required Delivery Date:09/21/2026
SPE8ES-26-T-2623 NSN/Part Number: 8030-00-656-1042 Quantity: 2 KT Purchase Request: 7017987997QTY: 2 Delivery: 77 days ADO