Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sealing Compound Supply (CLIN 0002)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of 24,000 kilotons of sealing compound, aligned with the same military and regulatory specifications established under CLIN 0001, ensuring consistency in quality and compliance across procurement lines. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 325520, which corresponds to the manufacturing of other chemical product and preparation products. The contract was posted on July 24, 2026, and is part of a broader effort to maintain standardized material specifications for critical defense applications. Although specific delivery locations and point of contact details are not provided, the place of performance and organizational address information are unspecified, suggesting logistics may be managed centrally or determined through subsequent directives. The contract remains accessible via the DIBBS system under the reference number SPE8ES26P1049.

General Info

24,000 kilotons of sealing compound supplied per CLIN 0001 specs by DLA under NAICS 325520.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 24.000 kilotons of sealing compound under the same military and regulatory specifications as CLIN 0001.

Similar Contracts

Same NAICS industry code

Sealing Compound Supply (CLIN 0001)The contract entails the supply of 2,000 kilotons of sealing compound compliant with military specifications and stringent hazardous material labeling requirements, ensuring it meets operational and safety standards for defense applications. The procurement is designated under CLIN 0001 and falls under NAICS code 325520, which corresponds to the manufacturing of other chemical products, reflecting the specialized nature of the compound. This is a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense, with the award posted on July 24, 2026. The place of performance and specific delivery details are not specified, but the contract requires adherence to all relevant federal and military regulations governing hazardous substances and industrial supplies. The contractual obligation is tied to the DLA’s procurement system, accessible via the provided DIBBS link, and serves logistical support for defense infrastructure or equipment maintenance.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Carpet Tape Manufacturing and SupplyThe contract calls for the manufacture and supply of 63 roll units of carpet tape identified by NSN 8040-01-569-9157, adhering strictly to military standards for adhesives, packaging, and labeling. The product must meet all required specifications to ensure compatibility and performance in defense applications. The solicitation is classified as a subcontract under NAICS code 325520 and is managed by DLA Dist San Joaquin, a branch of the Department of Defense, with performance expected to be delivered to Tracy, California, at zip code 95304-5000. The opportunity was posted on July 23, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for interested parties to submit proposals. All submissions must comply with the specified technical and regulatory requirements to be considered for award.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Epoxy Resin Manufacturing and SupplyThe contract requires the manufacture and supply of epoxy resin conforming to the BMS8-139 specification, adhering to military standards for performance, durability, and consistency. The work encompasses full production capabilities, rigorous quality control procedures throughout the manufacturing process, and initial packaging that ensures product integrity. Shelf-life management is a critical component, requiring precise labeling, storage conditions, and monitoring to maintain material viability from production through delivery and eventual use in defense applications. All activities must align with the stringent requirements of the Department of Defense to support mission-critical systems. Performance is designated at Tinker Air Force Base, Oklahoma, with the Defense Logistics Agency serving as the contracting authority under NAICS code 325520 for chemical manufacturing. The contract is structured as a subcontract with a solicitation response deadline of July 29, 2026, and was posted on July 23, 2026. Compliance with all technical specifications, documentation requirements, and defense supply chain protocols is mandatory, with an emphasis on reliability, traceability, and on-time delivery to meet operational needs. The product will be integrated into military-grade components requiring consistent material characteristics under extreme environmental conditions.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Adhesive Manufacturing and FormulationThe contract involves the manufacture and supply of a specialized, shelf-life-controlled, mercury-free military adhesive identified by NSN 8040-01-024-6991 and Part Number 2795574. The adhesive must fully comply with NAVSEA and OSHA hazardous material standards to ensure safety and performance in military applications. Production is required to meet strict formulation and quality controls to maintain consistent properties over the product’s designated shelf life, with all materials and processes adhering to environmental and occupational health guidelines. The solicitation is structured as a subcontract under NAICS code 325520, indicating classification within chemical manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The performance location is set at Yorktown, Virginia, with a response deadline of July 29, 2026. The contract seeks a supplier capable of producing this precise formulation at scale while maintaining all regulatory and functional specifications required for defense use.

Defense Logistics Agency

POSTED

DEADLINE

CARPET TAPEThe contract pertains to the procurement of carpet tape under NSN 8040-01-569-9157, with a quantity of 63 roll units, to be delivered within 256 days of award. The solicitation number is SPE8ES-26-T-2439, issued by the Defense Logistics Agency District San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, zip code 95304-5000. The contract is classified under NAICS code 325520 and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It incorporates cybersecurity compliance mandates, requiring the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization, and includes specific documentation obligations for source approval requests. The item is not required to have Item Unique Identification per customer direction, but it is subject to stringent export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons or entities, even within the United States. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and questionnaire. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation’s response deadline is July 29, 2026, with a posting date of July 23, 2026, and inquiries should be directed to Stephen Ockenhouse at dla-ts-fceb.inquiry@dla.mil.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

ADHESIVEThis contract specifies the procurement of an adhesive under solicitation SPE8ES-26-T-2434, with the NSN 8040-01-024-6991 and part number 2795574 from LOCTITE CORP. The product is supplied in 50 mL bottles, now sold in 12-packs, with a total quantity of 4 BT (bottles) required. Delivery is due within 20 days to the Navy Submarine Torpedo Facility in Yorktown, Virginia, FOB destination, with no variance allowed in quantity. The item is classified as a TYPE I (CODE F) with a non-extendable shelf life of six months and must be stored between 8°C and 21°C; deviations beyond this range may compromise product integrity. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging requirements. Hazardous material handling standards under OSHA's revised Hazard Communication Standard apply, requiring submission of Safety Data Sheets and compliant labels prior to award, along with employee training on these requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the adhesive, except for specified functional components like batteries or instruments as defined by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The item is subject to Covered Defense Information protocols, and shipment must be made via the fastest traceable means—parcel post is expressly prohibited. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List, with governing revision determined by the solicitation or award date depending on procurement scale.

Defense Logistics Agency

POSTED

DEADLINE

RESIN EPOXYThis contract specifies the procurement of a commercial off-the-shelf resin epoxy item identified by NSN 8040-01-695-3091 and part number BMS8-139, with a unit of issue in yards. The item is classified as a Type 2 (Code 3) shelf life item with a nine-month expandable shelf life and is designated as a critical application item, requiring strict adherence to packaging, marking, and handling standards. All supplies must meet DLA packaging requirements and be labeled and documented in compliance with the revised Hazard Communication Standard, including submission of Safety Data Sheets and HCS-compliant labels in accordance with 29 C.F.R. 1910.1200, along with employee training on these requirements. The product must be stored below 32 degrees Fahrenheit and shipped via fastest traceable means, explicitly excluding parcel post. The item must be delivered within five days to Tinker AFB, Oklahoma, under FOB destination terms with zero variance in quantity, inspected and accepted at the delivery point. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special marking code 33 indicating Type II shelf life compliance, and palletization must follow DLA packaging standards. The contract incorporates technical and quality requirements from the DLA Master List and references multiple military and federal standards including MIL-STD-147F, MIL-STD-129R, and Fed-Std-313F. The item is sourced from Pacific Coast Composites Inc. and Hexcel Corp, and the delivery deadline is July 27, 2026, with a required ship date to be confirmed. All documentation, labeling, and shipping procedures must align with DoD and OSHA regulations, and the buyer is specified as the Defense Logistics Agency under solicitation SPE8ES-26-T-2438.

Defense Logistics Agency

POSTED

DEADLINE

WHOLE BLOOD COLLECTThe Whole Blood Collection and Transfusion Kit is a compact, vacuum-sealed field module engineered for rapid collection and transfusion of fresh whole blood in remote, austere environments, particularly for forward military operations. Designed as a standalone skill set module, it contains all essential components to perform blood collection and transfusion procedures in the field while meeting or exceeding current blood bank standards, military guidelines, and training protocols. Included in the kit are an oral questions form, DD572, Standard Form 518, and a field blood transfusion system, ensuring compliance with documented procedure and regulatory requirements. The kit is also suitable for training and instructional use, enhancing readiness and proficiency among medical personnel. The procurement request specifies 50 units of this kit, identified by NSN 6515-01-657-4750, under Purchase Request 7017595160, with a required delivery within five days of award. The solicitation, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, is identified by number SPE2DS-26-T-267D and was posted on July 23, 2026, with responses due by July 29, 2026. The NAICS code 325520 categorizes it under medical equipment manufacturing. Performance is designated for Camp Pendleton, California, and the primary point of contact for inquiries is Michael Small, reachable via email or phone as listed in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

ADHESIVEThis contract is for a 24 fl oz aerosol-form neoprene contact adhesive, specifically 3M Company part number 70-0002-8604, intended for bonding rubber, supported vinyls, plastics, leather, metals, laminates, and wood products. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, requiring strict adherence to storage conditions between 60 and 80 degrees Fahrenheit. The adhesive must be furnished in the manufacturer’s original round, compound-lined, double-seamed cans with pressure-activated spray dispensers. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129R, including the inclusion of lot or batch numbers and the special marking code 32 for Type I shelf-life classification. Hazardous material requirements mandate compliance with OSHA’s revised Hazard Communication Standard, which includes submission of Safety Data Sheets (SDS) and compliant HCS labels prior to contract award, along with employee training on these requirements. The product is subject to DLA packaging and shipping regulations, with transportation required via the fastest traceable means—parcel post is prohibited. Delivery is FOB destination within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The contract references numerous technical and quality standards from the DLA Master List, including MIL-STD-147F, MIL-STD-129, and Federal Standard 313F, and is issued under the DoD unit of issue CN, with three cans ordered. The delivery address is Hurlburt Field, Florida, and the contract number is SPE8ES-26-T-2433, with an original required delivery date of July 27, 2026.

Defense Logistics Agency

POSTED

DEADLINE

SEALING KITThe sealing kit is a specialized type II manganese dioxide cured sealant conforming to SAE AMS-S-8802C, with qualification required under the Qualified Products List (QPL) maintained by the Performance Review Institute. It is supplied as a 1 fl oz injection-style extrusion cartridge for use in high-adhesion, temperature-resistant applications on integral fuel tanks and fuel cell cavities. The product must meet strict shelf life requirements—nine months extendable—and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including lot or batch number labeling. The kit components are to be separately packaged: base material in compound-lined, double-seamed cans with friction closures, and curing agent in resealable resin-lined containers, ensuring no chemical interaction or leakage during transport or storage. All components must be securely bundled as a complete unit using methods beyond hot-melt alone, with moisture-proof sealing and proper dunnage in D3 or hazardous material 4G boxes. Hazardous materials handling requires submission of Safety Data Sheets (SDS) and HCS-compliant labels per 29 C.F.R. 1910.1200, following OSHA’s Globally Harmonized System, alongside employee training on updated safety protocols. Third-party NADCAP certification is mandatory, and only manufacturers currently approved on the QPL may supply the item at award. The order quantity is 10 kits, with delivery due within 20 days FOB destination, subject to zero variance, and inspected and accepted at the final point of delivery. Packaging, marking, and shipping must adhere to RP001 and IP025 for hazardous materials, with all documentation referencing referenced revisions of MIL-STD-129R, MIL-STD-147F, and other governing standards. The contract is issued under Solicitation SPE8ES-26-T-2430, with the Defense Logistics Agency as the procuring entity, and delivery directed to a U.S. Army facility in Subic Bay, Philippines.

Defense Logistics Agency

POSTED

DEADLINE

EPOXY PUTTY,TITANIUThis contract is a total small business set-aside for the manufacture of epoxy putty, titanium, identified by part number 7124138-001 and cage code 53711, with a one-pound unit size and an approved source of 0RZG3. The solicitation, issued under N0010426QAC88, requires strict adherence to military standards including MIL-STD-129 for marking, MIL-STD-130 for identification, and MIL-STD-2073 for packaging, with a mandated 85 percent shelf life remaining upon government receipt. All items must conform to technical specifications detailed in referenced drawings and documents, with drawing data spanning multiple revisions from A to V and supporting documents such as MIL-DTL-31000 and DOD-D-1000. Configuration control follows MIL-STD-973, requiring formal change proposals and waivers to be submitted to NAVICP-MECH. Inspection is conducted by the government under FAR 52.246-2, with full contractor responsibility for quality assurance and documentation retention for 365 days post-delivery. Delivery is due within 90 days of award, with FOB destination terms applying, and payment is processed electronically via Wide Area Workflow using a combined invoice and receiving report. The contractor must comply with cybersecurity maturity model certification requirements effective November 2025 and adhere to security prohibitions and exclusions outlined in February 2026 directives. Only small businesses may respond, as this is a total small business set-aside under NAICS code 325520, with required representations and certifications included under deviation 2026-O0037. The contract specifies that any proposed alternate items must be fully documented and submitted for government review. All applicable drawings and documents must be accessed via SAM.gov using the solicitation number, and requests for controlled or classified materials must be routed through designated government offices with proper certification. The contracting officer contact is Amanda R. Hayward, reachable via email at amanda.r.hayward.civ@us.navy.mil, with the response deadline set for August 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

ANTISEIZE COMPOUNDThis contract is a fixed-price procurement for the manufacture of an antiseize compound specified under part number MIL-PRF-83483-8OZTU with cage code 81349, issued as a total small business set-aside under NAICS code 325520. The contract requires strict adherence to military specifications for material composition, marking, configuration control, and shelf life, with all items needing at least 85 percent of their shelf life remaining upon receipt by the first government activity. Marking must comply with MIL-STD-130, MIL-STD-1285, or other applicable military standards depending on the item type, and shelf-life dates must be clearly displayed in month/year format, with the earliest date on shipping containers when multiple unit packs have different production dates. Configuration control follows MIL-STD-973, requiring formal engineering change proposals, deviations, and waivers to be submitted to NAVICP-MECH in Mechanicsburg, Pennsylvania. The contractor is fully responsible for quality assurance and inspection, with the government retaining the right to conduct independent inspections at any time. All inspection records must be maintained for 365 days after final delivery. Packaging must meet MIL-STD-2073 and other referenced standards, and items must be prepared for direct delivery to government destinations under FOB-destination terms with a 90-day delivery window. The contract incorporates government source inspection per FAR 52.246-2 and requires compliance with cybersecurity maturity model certification, security prohibitions, and Navy-specific cybersecurity and small business representation requirements. Payment will be processed via Wide Area Workflow using an integrated invoice and receiving report, and all contractual documents are considered issued upon electronic transmission. Proposals must be submitted by the stated deadline, and contract information, including drawings and specifications, is accessible through SAM.gov using the solicitation number N0010426QAC95, with point of contact Amanda R. Hayward at the Naval Supply Systems Command in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 11 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 11 hours ago

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

about 11 hours ago

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract pertains to the provision of radiological testing services to determine whether a sealing compound exceeds regulatory thresholds for radioactivity. If testing reveals levels above permissible limits, the contractor is required to issue a formal notification to the appropriate authorities. This work falls under the NAICS code 541380, which covers other scientific and technical consulting services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The requirement is triggered only if radioactive materials are suspected or detected, making it a conditional but critical compliance obligation. Performance is expected to align with federal regulations governingradiological safety, though the specific location of performance is not detailed. The contract was posted on July 24, 2026, and is accessible through the DIBBS system under contract number SPE8ES26P1049.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Hazardous Material Compliance & Labeling ServicesThe contract pertains to the preparation and submission of Safety Data Sheets and hazard warning labels for chemical shipments compliant with Department of Defense requirements, ensuring all hazardous materials meet federal safety and regulatory standards. The work is being performed under a subcontract arranged by the Defense Logistics Agency, specifically under NAICS code 541620 for scientific and technical consulting services, indicating a focus on technical compliance and documentation rather than physical handling or distribution of chemicals. The contract is tied to a specific acquisition number, SPE8ES26P1049, and was posted on July 24, 2026, suggesting it is part of an upcoming procurement cycle aimed at maintaining standardized hazard communication across military supply chains. All deliverables must align with DoD protocols for chemical safety, which includes accurate classification, labeling, and documentation to support safe transportation, storage, and handling of hazardous substances. The place of performance is not specified, implying flexibility in where the services are rendered, but all work must satisfy federal defense compliance mandates. The absence of a point of contact or location details suggests the contractor will receive instructions and specifications through formal contractual channels or established DoD documentation systems, and adherence to technical accuracy and timeliness will be critical to fulfilling obligations under this agreement.

Environmental Consulting Services

POSTED

about 11 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 11 hours ago

DEADLINE

Logistics and FOB Destination Delivery ServicesThe contract requires delivery of goods under FOB destination terms with a strict timeline of 20 days from the date of award, ensuring all shipments meet precise logistical standards. This includes proper palletization that complies with military specifications, end-to-end tracking throughout the transportation process, and timely submission of invoices through the Wide Area Workflow system to meet Defense Logistics Agency requirements. The performance location is designated as FPO 34087, indicating delivery to military addresses overseas, and the work falls under NAICS code 484220, which classifies it as truck transportation for local and long-haul freight services. As a subcontract under the Department of Defense, the provider must align with DLA’s operational protocols for defense supply chain compliance. All proposals must be submitted by the response deadline of August 3, 2026, and the contract is structured to support reliable and audit-ready logistics for critical military supply needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE