SEALING COMPOUND

SEALING COMPOUND
SEALING COMPOUND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html U/I=KT
SPE8ES-27-T-0043
SECTION B
TYPE II: MANGANESE DIOXIDE CURED SEALANT
CLASS B-2: SUITABLE FOR APPLICATION BY EXTRUSION GUN AND SPATULA, 2
HOUR APPLICATION TIME
SIZE: A KIT CONSISTING OF A 5 GALLON PAIL OF BASE AND REQUIRED AMOUNT
OF CURING AGENT PACKAGED IN SEPARATE CONTAINERS.
5 GALLON KIT (5 GALLON PAIL & 1 GALLON CAN). MIL STD 129 LABEL
REQUIRED ON EACH PAIL AND/OR BOX.
5 GALLON PAIL WILL BE IDENTIFIED AS PART A, AND 1 OF 2
1 GALLON CAN WILL BE IDENTIFIED AS PART B, AND 2 OF 2, AND WILL BE
PLACED IN A D3 BOX (4G BOX IF HAZARDOUS) AND BRACED WITH PROPER DUNNAGE
TO P,,REVENT DAMAGE AND MOVEMENT.
10 GALLON KIT (2EA. 5 GALLON PAILS) (MIL STD 129 LABEL REQUIRED ON
EACH PAIL) ONE 5 GALLON PAIL WILL BE IDENTIFIED AS PART A, AND 1 OF 2
ONE 5 GALLON PAIL WILL BE IDENTIFIED AS PART B, AND 2 OF 2
15 GALLON KIT (3EA. 5 GALLON PAILS) (MIL STD 129 LABEL REQUIRED ON
EACH PAIL) ONE 5 GALLON PAIL WILL BE IDENTIFIED AS PART A, AND 1 OF 3
ONE 5 GALLON PAIL WILL BE IDENTIFIED AS PART A, AND 2 OF 3 ONE 5 GALLON
PAIL WILL BE IDENTIFIED AS PART B, AND 2 OF 3
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED
BY THE PERFORMANCE REVIEW INSTITUTE,
161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA
15086-7527. TO VIEW CONTRACTORS CURRENTLY
APPROVED BY (PRI) GO TO http://www.p-r-i.org http://www.p-r-i.org
THE MANUFACTURER FOR THE QPL ITEM MUST BE APPROVED FOR THE QPL ITEM AT THE TIME OF THE CONTRACT AWARD. PACKAGING/PACKING: THE BASE COMPOUND SHALL BE LOADED INTO A NEW, RESIN-LINED, 24 GAGE MINIMUM, STEEL PAIL WITH A BAIL HANDLE AND REMOVABLE LID. SUFFICIENT CATALYST SHALL BE LOADED IN A CONTAINER OF THE TYPE NORMALLY USED FOR THIS PRODUCT IN ACCORDANCE WITH THE SUPPLIER'S NORMAL COMMERCIAL PRACTICE. THERE SHALL BE NO INTERACTION CHEMICALLY OR PHYSICALLY WITH THE CONTENTS WHICH WOULD DAMAGE THE CONTAINER OR ALTER THE STRENGTH, QUALITY, OR PURITY OF THE CONTENTS. THE PAILS SHALL BE OVERPACKED WITH WOODEN BOXES TO PREVENT DENTING. THE BASE COMPOUND AND CATALYST CONTAINERS SHALL BE PHYSICALLY CONNECTED, ATTACHED, OR BOXED TOGETHER TO PREVENT SEPARATION DURING SHIPMENT, HANDLING, STORAGE, AND REDISTRIBUTION AND, AS A MINIMUM, SHALL MEET THE APPLICABLE REQUIREMENTS OF THE NATIONAL MOTOR FREIGHT CLASSIFICATION, UNIFORM FREIGHT CLASSIFICATION, DEPARTMENT OF TRANSPORTATION, AND INTERNATIONAL MARITIME DANGEROUS GOODS CODE REGULATIONS. MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE ADDITION OF LOT OR BATCH NUMBER.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RS054: Shelf life requirement RS001 for a TYPE 2 (CODE 3) item with a shelf life of 9 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-S-8802F REVISION NR F DTD 10/01/2022 PART PIECE NUMBER: TY2CLB-2 5 GALLON BASE KIT
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1
SPE8ES-27-T-0043
SECTION B
IAW REFERENCE UNK FED-STD-313F
REVISION NR F DTD 10/12/2018
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS5502D REVISION NR D DTD 04/01/2016 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018635364 0001 KT 3.000
NSN/MATERIAL:8030008788428
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:001
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
STORAGE: STORE BELOW 80°F
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DTW700
PARTS-ATTACH GENERAL DEPOT (PAGD)
SPE8ES-27-T-0043
SECTION B
PR: 7018635364 PRLI: 0001 CONT’D
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
MARKFOR
DTW700
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
M/F: (TCN) DTW75462501268
RDD: A03
PROJ: TP 3
SUPP ADD: DA4RAS SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A31 DIST: N01 ADV: 2L FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:10/08/2026
SPE8ES-27-T-0043 NSN/Part Number: 8030-00-878-8428 Quantity: 3 KT Purchase Request: 7018635364QTY: 3 Delivery: 20 days ADO