Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEALING STRIP

Active
SPE4A5-26-T-303KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a sealing strip with NSN 6610-00-126-6113 and part number 10201-004, under solicitation SPE4A5-26-T-303K, requiring delivery of 11 units within 333 days from the contract date, with delivery terms FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, materials, and unit containment as detailed, and marking must comply with MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and shipment is directed to the parcel post address in Tracy, California. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each (EA), with a total price of $11.00, and identifies Hien-Van Trinh as the primary point of contact for the Department of Defense’s ASC Supplier Oper OEM Division.

General Info

Procure 11 sealing strips NSN 6610-00-126-6113, FOB origin, $11 each, deliver in 333 days to Tracy CA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-303K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEALING STRIP
SEALING STRIP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SYMETRICS INDUSTRIES, LLC 22830 P/N 10201-004
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528802 0001 EA 11.000
NSN/MATERIAL:6610001266113
DELIVERY (IN DAYS):0333
DELIVER FOB: ORIGIN
SPE4A5-26-T-303K
SECTION B
PR: 7017528802 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:06/28/2027 Original Required Delivery Date:06/28/2027
SPE4A5-26-T-303K NSN/Part Number: 6610-00-126-6113 Quantity: 11 EA Purchase Request: 7017528802QTY: 11 Delivery: 333 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
VALVE, RESUSCITATORThe valve, resuscitator is a barrier system featuring three separate filtration layers and a one-way duck bill valve with top and bottom ports, designed for adjustable pressure settings from 5 to 20 cm H2O and equipped with a standardized 22mm ID connector to interface with any resuscitation bag flow diverter. Each unit is individually packaged and supplied in boxes of ten, with a shelf life of 60 months, ensuring long-term usability. To maintain product integrity, no more than nine months may have elapsed between the manufacturer’s production date and the delivery date to the government. The item is governed by technical and quality requirements outlined in the DLA Master List, with packaging and handling compliance mandated under specific procurement standards including RA001, RP001, and RQ011. The NSN 6515-01-620-0444 identifies this item, with a purchase request quantity of 10 boxes under solicitation SPE2DS-26-T-257D issued by the Department of Defense’s Medical Supply Chain, requiring delivery within five days of award to the APO 09094-3219 location. Primary point of contact for inquiries is Elizabeth Cruz, with the solicitation posted on July 21, 2026, and responses due by July 27, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, SIGNAL DAThe contract pertains to the procurement of seven units of a Converter, Signal DA, with the NSN 5895-01-615-3408, under solicitation SPE4A7-26-T-585J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by July 29, 2026, and delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applied based on the acquisition type and revision dates in effect. The item involves controlled technical data subject to ITAR or EAR export regulations, prohibiting unauthorized disclosure or transfer to foreign persons, including foreign nationals in the U.S., and requiring compliance with DFARS 252.225-7048. Contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA to access such data. Inspection and acceptance occur at the manufacturer’s origin, non-accepted supplies must have government identification removed, and additional tailored quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, with Tamera Greene as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, URThe contract specifies the procurement of a urethral catheterization kit, identified by NSN 6515-01-615-2124, containing a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, designed for infection control and including a complete set of sterile accessories: drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, dual prefilled syringes (10 cc sterile water and 10 cc lubricant), and forceps. Each unit is packaged as a sealed tray of ten kits, with the unit of issue defined as a packaged group of ten. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Labeling must include NSN, manufacturer and CAGE code, date of manufacture or expiration, contract number, and lot number, in compliance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards under DLA’s RP001 requirements, protect against damage, and be shipped in suitable exterior containers to ensure safe, low-cost delivery to the destination. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards like ASTM D3951. The product is FDA-regulated and subject to referral verification in EBS. Delivery is FOB destination, with zero tolerance for quantity variance. Two shipments totaling one package each are required, with delivery deadlines of July 22 and July 23, 2026, to Fort Bragg, North Carolina, and USS Charleston, respectively. All shipments must use traceable transportation methods, prohibiting parcel post, and palletization must comply with DLA packaging guidelines.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETERThe contract specifies the procurement of pediatric-sized non-invasive blood pressure cuffs, with bladder dimensions of 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. This item serves as a replacement component for NSNs 6515-01-582-4060 and 6515-01-582-4072, and is identified by NSN 6515-01-593-8773 and Philips part number 40401B. Three units are required, each to be delivered as a single unit of issue, with a firm delivery deadline of 20 days after award, FOB destination, and no variance permitted in quantity. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must also meet ASTM D3951 standards, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging must ensure protection from damage and be suitable for commercial shipping, using sealed unit containers and secure exterior shipping containers capable of safe transport at the lowest rate. The shipment must be traceable and cannot be sent via parcel post. Delivery is to the U.S. Air Force Medical Command at Fort Sam Houston, San Antonio, Texas, with the required delivery date set for July 23, 2026. The supplier, Philips North America LLC, must adhere to all DLA packaging and marking requirements under RP001 and ensure full compliance with government procurement specifications for medical equipment.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
DRAPE, WOUND CAREThe contract is for sterile disposable paper wound care drapes measuring 18 inches by 26 inches, supplied in packages of 300 units each. These drapes are designed to provide a sterile field during medical procedures and include an inner repellent layer to prevent moisture penetration. The product is identified by NSN 6515-01-568-3821, with a single package requested under purchase request 7017567293. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DS-26-T-254M with a response deadline of July 27, 2026, and was posted on July 21, 2026. Performance is to be delivered to Dover AFB, ZIP 19902-7307. Bidders must specify the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, subject to specific revision controls based on acquisition type and amendment dates. It also includes DLA packaging standards, provisions for removal of government identification from non-accepted supplies, and potential applicability of covered defense information requirements. The contracting office is under the Department of Defense’s Medical Supply Chain MD Surg FSF, with Patrick Esposito listed as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
RAZOR, SHAVE BIOPSYThe contract is for the procurement of 1 package of 400 disposable, sterile, flexible razor shave biopsies with plastic handles, under National Stock Number 6515-01-600-0478, issued by the Department of Defense through the Medical Supply Chain MD SURG FSF. The item must be packaged commercially, protected against damage, and meet strict packaging standards including ASTM D3951 and DLA’s RP001 for palletization, with labeling governed by Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items. Each unit must be marked with the NSN, manufacturer name and CAGE code, contract number, lot number, and the phrase "MFD" followed by the date of manufacture, along with the expiration or retest date. The product must have a 36-month shelf life, with no more than five months elapsed between manufacture and delivery to the government, and is subject to destination inspection and acceptance by the government at Patrick Air Force Base, Florida, with FOB destination terms assigning all risk and cost to the contractor until arrival. The solicitation requires bidders to specify the source and part number, and mandates electronic submission through the DLA Internet Bid Board System by July 21, 2026, with delivery expected within 20 days after order placement. The contract incorporates numerous Federal Acquisition Regulation clauses including those on prohibited confidentiality agreements, System for Award Management maintenance, simplified acquisition terms, contract type, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, authorization and consent, accelerated payments to small business subcontractors, safeguarding contractor information systems, changes, unenforceability of unauthorized obligations, and Navy-specific requirements for levy on payments, NIST SP 800-171 assessments, and subcontracting for commercial products. A special DFARS clause, 252.223-7001, requires strict compliance with OSHA’s Hazard Communication Standard, submission of complete Safety Data Sheets in accordance with Federal Standard No. 313 prior to award, and updated documentation if material composition changes. Offerors must complete required representations and certifications through DIBBS, including UEI and CAGE code disclosure if providing covered telecommunications equipment, and must indicate their size status and socioeconomic classifications. Payment must be submitted via Wide Area WorkFlow, and the contract type is not explicitly defined but appears intended for a micro-p
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
RESUSCITATOR, HAND OPERThe contract specifies the procurement of a hand-operated resuscitator designed for infant use, featuring a disposable single-shutter valve system, an integrated handle, and a thin-walled compression bag for ease of operation and portability. Each unit includes a medication port and is packaged with an infant mask, sold as a single package containing twelve complete units. The product is color-coded for clear identification of infant size and comes in an individual resealable plastic carrying bag. All units must be sealed in suitable containers to prevent damage during transit, and commercial packaging standards must be followed per the procurement document. The items must be shipped in exterior containers that ensure safe delivery to the point of destination at the lowest possible rate, with export packaging applied when necessary. All items are subject to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be properly marked accordingly. The unit of issue is a package of twelve, and the NSN is 6515-01-610-7720. Technical and quality requirements referenced under RA001 must be met and are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging conforms to DLA requirements, and non-accepted supplies must not bear government identification. The contract is issued under solicitation SPE2DS-26-T-255W with a response deadline of July 27, 2026, and delivery is required within 84 days of award to APO ZIP 09227-0000. The contract falls under NAICS code 334511 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
DETENT ASSEMBLY, PAW
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
ANEMOMETERThe contract specifies the procurement of an anemometer with NSN 6660-01-559-3025 and part number 5725, requiring a quantity of 15 units to be delivered FOB origin within 171 days, with a need ship date of January 17, 2027, and an original required delivery date of December 29, 2026. Each unit is priced at $15.00, resulting in a total contract value of $225.00. The item must comply with DLA packaging requirements per RP001 and be prepared for delivery according to MIL-STD-2073-1E, with specific packaging methods including preservation type 10, no cushioning material, and unit containers coded as E5. Marking must follow MIL-STD-129, including the special marking code 05 indicating the item is a delicate instrument, and physical identification must adhere to RQ017. Inspection and acceptance occur at destination, with sampling governed by MIL-STD-1916 or ASQ H1331, Tables 1, enforcing a zero-defect acceptance policy unless otherwise stated. Attributes classified as critical, major, or minor are to be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List as of the solicitation or award date, depending on acquisition size. The delivery address is DLA Distribution San Joaquin in Tracy, California, and transportation details must align with DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A5-26-T-298Y with a NAICS code 334511 and primary point of contact Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
PANEL, INDICATORThe contract is for the procurement of two units of a PANEL, INDICATOR with NSN 5895-01-550-2514 and part number D-3604 from L3 TECHNOLOGIES, INC., under solicitation SPE4A7-26-T-584Y. Delivery is required within 171 days from the contract date, with a specified delivery date of January 17, 2027, and delivery must be made FOB origin to the designated receiving warehouse in Tracy, California. The quantity is strictly fixed at two units with zero variance allowed. The item is designated as a critical application item and must comply with stringent DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, as well as marking in accordance with MIL-STD-129. Sampling inspection follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, except for specific exempted applications such as specialized instruments, weapon systems, and certain sensors, which must include secondary containment per NAVSEA 5100-003D. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and documentation for source approval must meet RC001 specifications. All supplies must be delivered to the provided parcel post address and transported in accordance with DLAD procedural notes C19 and C20. The contracting office is the Department of Defense, under the ASC SUPPLIER OPER AE AND AF DIV, with Soni Randolph as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SUPPORT, PELVICThe contract is for the procurement of two units of a pelvic support device described as a green Velcro and shoelace fastener designed for temporary pelvic stabilization, intended to be cut to fit each patient. This item is regulated by the FDA and must be supplied with the manufacturer’s part number GC-2000 and commercial item identification, with bidders required to clearly specify the commercial origin and part number. All packaging must comply with commercial standards and the DLA Medical Marking Standard No. 1, superseding MIL-STD-129, while also adhering to ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements. Each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. The product is to be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance. Shipping must be traceable; parcel post is prohibited. The delivery address is designated for the U.S. Air Force Medical Command in San Antonio, Texas, and all labeling and marking must strictly follow medical packaging regulations. The contract is issued under solicitation SPE2DS-26-T-254U, with a response deadline of July 27, 2026, and an original required delivery date of July 23, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333914
New
DIBBS
SHAFT ASSEMBLYThe contract pertains to the procurement of two shaft assemblies with NSN/part number 4320-00-731-6506 under solicitation SPE4A5-26-T-304G, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days after award, and the solicitation closes on July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. The supplier must comply with documentation obligations for source approval, cybersecurity requirements under CMMC Level 2, DLA packaging standards, and physical marking guidelines. Government identification must be removed from non-accepted supplies, and item unique identification is not required as specified by the service customer under DFARS 252.211-7003. Covered defense information applies, and the material has no shelf life constraint. Measuring and test equipment must be adequately maintained and calibrated. The place of performance is New Cumberland, Pennsylvania, with Courtney Minor as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325110
New
DIBBS
PROMOTER, CHEMICAL AThe contract is for the procurement of PROMOTER, CHEMICAL A, a commercial off-the-shelf (COTS) item identified by NSN 6850-01-719-2762 and part number AP-1, supplied by ANDPAK, INC in cases containing twelve 11.0 fluid ounce cans each. A total of nine cases are required under solicitation SPE4A5-26-T-304N, with delivery due within 20 days FOB destination. Strict packaging and marking standards apply, including compliance with MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA packaging requirements, with special handling codes for hazardous materials and Type I shelf-life labeling. The item has a non-extendable 12-month shelf life requiring specific markings per special code 32. Mandatory documentation includes approved Safety Data Sheets and OSHA hazard warning labels, which must be reviewed and approved by technical personnel prior to award and submitted to the DLA Aviation HMIRS office. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. All shipments must be sent via traceable freight, not parcel post, to the designated Nellis AFB delivery address. The contract incorporates applicable technical and quality requirements from the DLA Master List, with inspection and acceptance occurring at the destination and zero tolerance for quantity variance.
Petrochemical Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract pertains to the procurement of a straight shaft identified by part number 392184-7 and NSN 3040-01-544-1203, with a quantity of 14 units to be delivered FOB origin in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is classified as a critical application item under Lockheed Martin Corp and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, indicated by R or I numbers. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to DLA-specific guidelines including palletization and the use of specified preservation methods and materials, with no special marking required. Delivery is required within 171 days of order placement, with an original required delivery date of May 13, 2027, and a need ship date of January 17, 2027. The destination for delivery is the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit price is $14.00 per unit for a total contract value of $196.00. The contract is issued under solicitation number SPE4A5-26-T-303C, with a response deadline of July 29, 2026, and is categorized under NAICS code 333613. Transportation instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is EA as defined by DLA standards. The point of contact for the contract is Hope Scott of the Department of Defense’s ASC Supplier Operations OEM Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
DOOR, TROUGHThe contract pertains to the procurement of one unit of a door and trough assembly identified by NSN 4010-01-584-6194 and part number 5251292, sourced from ED ETNYRE & CO. The item is a wire rope assembly with no shelf life requirement and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, including preservative method 10, clean and dry conditions, and no cushioning material. Marking requirements follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery point is FOB origin with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is November 17, 2026, with a lead time of 110 days from order, and the shipment is directed to DLA Distribution San Joaquin at Tracy, California. The solicitation number is SPE4A5-26-T-303Y, issued under a federal procurement, with the point of contact being Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details