Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Seamless Aluminum Alloy Tubing Supply

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of seamless, drawn aluminum alloy tubing made from 5052 alloy, Type 1, in Temper 0, with exact dimensional specifications of 0.313 inches outer diameter and 0.028 inches wall thickness, each piece measuring exactly 12 feet in length. All tubing must comply strictly with federal and SAE performance and manufacturing standards to ensure suitability for demanding applications. The material is intended for use within the Department of Defense’s Fluid Handling Division, with performance and delivery required at Robins Air Force Base, Georgia, ZIP code 31098-1887. The opportunity is structured as a subcontract under NAICS code 332439, with responses due by August 3, 2026, and the solicitation was posted on July 23, 2026. Bidders must ensure full adherence to the technical and regulatory requirements without exception.

General Info

Supply 5052 aluminum alloy tubing, 0.313 OD x 0.028 wall, 12 ft, to Robins AFB, compliant with SAE and DoD standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of seamless, drawn aluminum alloy tubing (5052 alloy, Type 1, Temper 0) with precise dimensions (0.313" OD, 0.028" wall, 12' length) per federal and SAE specifications.

Similar Contracts

Same NAICS industry code

Truck Customization and Attachment IntegrationThe contract involves the full installation, fabrication, and integration of loader and grapple attachments onto truck chassis, requiring significant hydraulic and structural modifications to ensure the vehicles are fully operational and field-ready upon delivery. The work demands precision engineering to align the attachments with the chassis integrity, maintain payload capacity, and ensure safe and reliable performance under operational conditions. All systems must be thoroughly tested and verified to meet rigorous field standards without the need for additional on-site adjustments. The contract is classified as a subcontract under NAICS code 332439, with a posting date of July 24, 2026, and a response deadline of August 13, 2026. It is managed by the Mississippi Department of Finance and Administration under the agency name MPTAP, with no specified place of performance or point of contact listed. The solicitation is accessible through a public portal, and interested parties must submit proposals prior to the deadline to be considered for award.

POSTED

DEADLINE

Dump Body Construction & InstallationThe contract calls for the fabrication and installation of dump bodies constructed from 3/16-inch AR400 steel, designed to meet rigorous durability standards for heavy-duty use. Each unit must include a fully integrated vibrator system to prevent material buildup, a custom tailgate seal to ensure leak-free operation, and a hydraulic hoist capable of achieving a full 180-degree dumping angle for maximum efficiency and safety. The work involves both manufacturing the components to specified engineering requirements and on-site installation, ensuring seamless integration with existing vehicle platforms. The solicitation is issued as a subcontract under the Mississippi Department of Finance and Administration, with the North American Industry Classification System code 332439 indicating specialized metal fabrication. Responses are due by August 18, 2026, and the project is open to qualified subcontractors without a set-aside designation. Performance location details are not specified, but all work must comply with the technical and operational standards outlined in the contract. Interested parties may access the full solicitation through the provided state portal for additional specifications and submission guidelines.

POSTED

DEADLINE

Supply of GSA Class 5 IPS ContainersThe contract calls for the supply of GSA-approved Class 5 Information Protection System containers designed to safeguard classified materials within secure environments, ensuring compliance with federal security standards for physical protection of sensitive information. This subcontract is designated as a Total Small Business Set-Aside under SBA rules, meaning only small businesses are eligible to compete, and it falls under NAICS code 332439, which corresponds to the manufacturing of metal lockers and safes. The solicitation was posted on July 24, 2026, with responses due by 5:00 PM EDT on July 30, 2026, and the award will be managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The containers must meet stringent GSA Class 5 specifications for intrusion resistance, fire resistance, and tamper protection to support secure storage of classified materials in military and defense operations.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC05, issued by the Department of Defense through DLA Aviation at Philadelphia, pertains to the supply of shipping and storage containers governed by Drawing 838E001, Revision Latest, and referenced specifications including MIL-I-45208. The containers must be manufactured using rotational molding with polyethylene shell material and meet stringent quality and compliance requirements, including adherence to AWS welding standards for steel, aluminum, and stainless steel, and use of electrodeposited alkaline Zinc-Nickel Alloy finishes in place of cadmium plating. Each container must be affixed with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and a serial number formatted as “contract#_no_dashes-000X.” A First Article Test (FAT) is mandatory unless waived for previously approved suppliers who can demonstrate identical prior production within three years at the same facility using identical processes and without waivers or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award, and the government will conduct rigorous testing including dimensional inspection, initial and final leak tests at 0.25±0.05 PSIG, an 18-inch free-fall drop test, and form-and-fit verification using government-provided items. The cost of FAT testing, estimated at $12,000, is borne by the contractor, and any failure to comply may result in contract default. All testing components, including shipping and disposal, are the contractor’s responsibility, and rejected units must be corrected and resubmitted at the contractor’s expense. The contract imposes strict controls on materials and manufacturing processes: welding must follow specific filler alloys for aluminum (4043 or 5356/5556), and work stations must maintain clean, controlled environments to prevent contamination. Contaminants such as oils and waxes must be removed through approved cleaning methods, and chemical deoxidizing must occur no more than 10 days prior to welding (reduced to 3 days outdoors), followed immediately by mechanical cleaning using approved stainless steel tools to prevent galvanic corrosion. Desiccant in accordance with MIL-D-3464 must be included at one-third unit per cubic foot of interior volume, and packaging must comply with MIL-STD-2073. The contract mandates use of the Workflow Pro Mod Assist Module, requires adherence to Buy American provisions

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract encompasses the procurement of specialized shipping and storage containers under solicitation SPRPA126RVB95, issued by the Defense Logistics Agency Aviation at Philadelphia, with a closing date extended to August 27, 2026. The containers must be manufactured to exacting specifications outlined in Container Research Corporation drawing number 05259, revision latest, with aluminum shell material and strict adherence to AWS welding standards for aluminum, steel, and stainless steel. Critical requirements include compliance with MIL-STD-130 for Unique Identification (UID) marking in data matrix format, with each unit assigned a serial number following the format “contract#_no_dashes-000X”. Welding processes must be controlled, documented, and inspected with visual and potential non-destructive testing, while sealing crevices and applying electrodeposited zinc-nickel alloy finishes are mandatory. Materials and processes are tightly regulated, including deoxidizing procedures limited to 10 days prior to welding and prohibited use of certain cleaning agents. Quality assurance is rigorous, requiring a First Article Test (FAT) for new manufacturers, with one unit submitted for comprehensive testing within 120 calendar days of contract award. Testing includes dimensional checks, a 18-inch free-fall drop test, pneumatic leak detection (with pressure loss thresholds strictly defined), form and fit verification, and coating inspections. The contractor bears all costs related to FAT submission, shipping, and rework if disapproved, and must provide operating and maintenance instructions. Approved paint systems and coating thicknesses are mandated per federal and military standards, with restrictions on ozone-depleting substances. A waiver to FAT is available only to prior suppliers who can prove identical production under the same facility, processes, and within three years, and must submit dual pricing. All containers require desiccant, sealed joints, and nameplates with UID marks, with the Naval Inventory Control Point Philadelphia acting as the contact for serial number assignment and test scheduling. Packaging must conform to MIL-STD-2073, and the contract includes provisions for security, Buy American compliance, small business set-asides, and equal opportunity, reflecting a comprehensive framework for defense-critical supply chain integrity.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract solicits the manufacture of containers meeting strict technical and quality standards, with the primary item identified by drawing number 05259-657E001, Revision Latest, produced via rotomolding using plastic shell material. Each container must be uniquely identified with a UID marking in data matrix format per MIL-STD-130, with serial numbers following the format contract#_no_dashes-000X, and must include a nameplate with approved alphanumeric serial numbering obtained from NAVICP. A First Article Test is mandatory unless waived under specific conditions for prior approved suppliers who meet stringent criteria including identical production location, processes, and no prior rejections or deviations. The First Article submission requires one unit delivered within 120 days of contract award to a government-designated test site, with comprehensive testing including dimensional verification, 18-inch free-fall drop testing, and pneumatic leak tests under defined pressure parameters, where any pressure loss over 0.05 psi or deformation exceeding three-quarters of an inch results in disapproval. The contractor bears all costs related to First Article testing, including shipping, repairs, and additional submissions if failed, and must certify that production occurs at the same facility as the First Article. Compliance with ASTM B 841 for zinc-nickel plating, AWS D1.2 for welding, and MIL-C-5541 for cleaning is required, along with one-third unit of desiccant per cubic foot of internal volume. The contract mandates 100% production leak testing using Method 5009 of Federal Test Method Standard 101C, with a threshold pressure loss of 0.025 PSIG after temperature and barometric adjustments. All tooling and manufacturing aids are the contractor’s responsibility, and no Government-furnished equipment applies. Packaging must follow MIL-STD-2073. The closing date for submissions has been extended to August 31, 2026. The solicitation includes multiple regulatory clauses such as Buy American, Equal Opportunity, Security Prohibitions, and Mandatory Use of Workflow Pro, and enforces strict liability limitations and compliance with National Defense priority ratings. Offers must clearly state whether they are submitted with or without waiver of First Article requirements, and failure to comply may result in contract default.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThe contract pertains to the procurement of containers manufactured to stringent military specifications, with primary reference to Container Research Corporation drawing number 05259, 530E001-501, latest revision, and associated technical requirements. The container shell is to be made of aluminum, with all manufacturing, testing, and inspection strictly adhering to the referenced drawings, specifications, and contract clauses. Key prohibitions include the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759, and cadmium plating, which is replaced with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Welding must comply with AWS standards for the respective metals, with specific filler materials required for aluminum alloys, and all welds must undergo visual inspection with 5x magnification where necessary, with potential additional non-destructive testing such as dye penetrant as directed by the government. Strict cleaning and deoxidizing procedures must be followed prior to welding, including chemical treatments with approved acids and mechanical cleaning methods that avoid iron-based abrasives to prevent corrosion. Each container must be marked with a Unique Identification (UID) in data matrix format on a nameplate, per MIL-STD-130, and assigned a sequential serial number starting from 0001. A First Article Test (FAT) is mandatory for new manufacturers, requiring submission of one unit for comprehensive testing at a designated government facility in Colts Neck, NJ, within 60 calendar days of contract award. FAT includes dimensional checks, leak testing under 1.00 ± 0.05 psig pressure for 30 minutes, an 18-inch free fall drop test on concrete, form and fit verification with government-supplied components, and final leak retest. The contractor bears all costs related to FAT preparation, shipping, and retesting if disapproved. Approved FAT samples may be counted toward contract quantity if undamaged, but unapproved samples are destroyed. For experienced suppliers, a waiver of FAT may be considered if identical units were produced within the last three years at the same facility without deviations or rejections, provided certification is submitted. All production units must undergo 100% drop testing under the same conditions as FAT. Packaging must comply with MIL-STD-2073, and the contract includes multiple mandatory clauses related to Buy American standards, security exclusions, equal opportunity, warranty limitations, and adherence to the latest

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued by the Defense Logistics Agency Aviation at Philadelphia, solicits the manufacturing of a plastic container shell using vacuum forming, governed by Naval Air Systems Command drawing 3321AS600 Revision LATEST and associated sub-drawings. The item is a multi-application container requiring strict adherence to quality and production standards, including compliance with AWS welding specifications for steel, aluminum, and stainless steel, and adherence to deoxidizing, cleaning, and material control procedures outlined in MIL-C-5541 and ASTM standards. All units must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and each container must include one-third a unit of desiccant per cubic foot of interior volume. Engineering source approval is mandatory for new manufacturers, and only approved shock mounts may be used, with HA KING SHOCK MOUNT (13008) 7900 listed as an authorized alternative. The contract prohibits chromate conversion coatings containing hexavalent chromium due to RoHS compliance, and the waterproof test per ASTM-D-951 has been deleted, replaced by visual inspection of closures and rivets. A First Article Test (FAT) is required for new suppliers, with one unit to be delivered within 120 calendar days for extensive dimensional, functional, and environmental testing including four 18-inch free-fall drops, initial and final leak tests at 1.00 ± 0.05 psig, and form-fit validation. The contractor bears all costs related to FAT shipment, testing, and rework if disapproved, and any additional submissions must meet government-specified deadlines. Approved First Article units may be counted toward contract delivery if undamaged and not destroyed during testing. Production inspections require sampling of at least one unit per lot, subject to drop and waterproof tests witnessed by government representatives, with rework permitted only once per defective unit. The contract mandates compliance with Buy American and small business set-aside provisions, along with security restrictions and mandatory use of Workflow Pro. Performance is set to conclude by August 31, 2026, and all communications, including drawing requests and UID number assignments, must be directed to the buyer at the designated email address. All tooling, fixtures, and test equipment are the contractor’s sole responsibility unless otherwise specified.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC19, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, pertains to the procurement of shipping and storage containers governed by Container Research Corp drawing number 05259-934E001, with the latest revision. The contract mandates strict compliance with technical specifications including aluminum construction, electrodeposited alkaline Zinc-Nickel Alloy finish per ASTM B841, and welding standards per AWS D1.1, D1.2, D1.3, and D1.6 depending on material, with specific filler metals required for 6061 and 5000 series aluminum alloys. Each container must bear a Unique Identification (UID) in data matrix format on a nameplate, following MIL-STD-130, and be assigned a serial number in the format contract#_no_dashes-000X. A First Article Test (FAT) is required unless waived for qualified prior suppliers, with strict submission deadlines, test procedures including air pressure leak tests, 18-inch drop tests, and form and fit evaluations, all at the contractor’s expense. The contractor must provide test samples unpainted with light preservative, ensure welding and cleaning processes adhere to precise chemical deoxidizing and mechanical cleaning protocols, and seal crevices with MIL-S-81733 sealant. Each unit must contain one-third cubic foot of desiccant per interior volume, and all welding and process controls must be documented and visible at workstations. The Government will conduct FAT testing with an estimated cost of $20,000, and samples will not be returned unless refurbishment is possible and approved. Only the specified shock mount is approved, and substitutions are prohibited without written authorization. The contract includes Buy American, security, small business set-aside, and quality assurance clauses, and the offer deadline is September 9, 2026. Engineering source approval is mandatory for new manufacturers, and all drawing requests must be directed to the designated buyer.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning ContainerDLA Troop Support is conducting market research to identify qualified sources capable of manufacturing a 20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning Container with part number SB861.6 NQ, originally produced by Sea Box, Inc with CAGE code 0FXA9. This is not a solicitation for quotes but a sources sought notice aimed at gathering technical capabilities from potential manufacturers. Respondents must submit a complete technical data package that includes the original manufacturer’s proprietary drawings for comparison, as the Government does not possess these drawings and they remain the exclusive property of the original manufacturer. The annual estimated quantity is five units, and the national stock number remains unassigned. Submissions are required by August 24, 2026, and interested parties must contact Avril Dickerson prior to the deadline. The Government is under no obligation to award a contract based on responses, nor will it compensate respondents for information submitted. The North American Industry Classification System code for this requirement is 332439.

DLA Troop Support

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued under solicitation number SPRPA126RVC07 by the Department of Defense through DLA Aviation at Philadelphia, extends through August 31, 2026, to promote competition for the supply of rotating molded polyethylene containers conforming to Drawing No. 861E001 Revision Latest, as controlled by Container Research Corporation. The item must be manufactured using rotational molding with specific material and finish requirements, including replacement of cadmium plating with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Each container requires a Unique Identification (UID) marking in data matrix format on a nameplate, following MIL-STD-130, with a serial number formatted as contract#_no_dashes-000X. A mandatory First Article Test (FAT) is required for new suppliers, involving dimensional, functional, fit, and leak tests under Federal Test Method Standard 101C, including a 18-inch drop test and pressure retention evaluation, with failure thresholds strictly defined. The contractor is responsible for all FAT sample submission, testing costs, repair, and disposal, with the government estimating $12,000 in testing expenses to be factored into offers. Existing qualified suppliers may request a waiver of the FAT requirement if they can prove identical prior production within the last three years from the same facility without deviations or rejections. Packaging must comply with MIL-STD-2073, and each container must include one-third unit of desiccant per cubic foot of internal volume. All manufacturing must occur in a single facility, and production cannot initiate before FAT approval, with associated costs borne solely by the contractor. The contract enforces Buy American provisions, security exclusions, integrity of unit pricing, and mandatory compliance with WFP Mod Assist and other federal mandates. Communication regarding drawings, UID numbering, FAT arrangements, and nameplate details must be directed exclusively to the designated buyer point of contact via email.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND STThis contract, identified by solicitation number SPRPA126RVC02 and issued by the Department of Defense’s DLA Aviation at Philadelphia, pertains to the procurement of plastic containers manufactured via rotomolding to drawing number 05259-829E001, revision latest, with strict compliance to military and technical specifications. Each container must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and affixed with a nameplate containing a contract-specific serial number format. The contract requires adherence to stringent quality controls, including a First Article Test (FAT) with mandatory submission of one unit within 120 calendar days for dimensional, functional, and leak integrity testing, though waivers may be considered for prior approved suppliers who meet specific criteria such as identical production history within the past three years and use of the same facility and processes. All containers undergo 100% production leak testing using pneumatic pressure methods per Federal Test Method Standard 101C, with rejection thresholds for pressure loss and shell deformation, as well as an 18-inch drop test to verify structural integrity. The use of electrodeposited alkaline Zinc-Nickel Alloy finish replaces cadmium plating, and each unit must include one third of a cubic foot of non-dusting desiccant per interior volume. The contractor is solely responsible for procuring all tooling, testing equipment, and shipping costs for FAT samples, none of which will be returned unless approved and refurbished; destroyed samples are irrecoverable. The contract includes mandatory compliance with Buy American provisions, security exclusions, small business set-asides, and prohibitions against unauthorized use of restricted technologies. Payment and invoicing follow Wide Area Workflow instructions, with delivery and shipping coordinated through designated Navy contacts. The solicitation closes on August 31, 2026, and includes a clause allowing contract extension to promote competition. Engineering source approval is required for new manufacturers, and all inquiries regarding drawings, UID numbering, or FAT coordination must be directed exclusively to the designated buyer email provided on the contract’s first page.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Small Business Subcontracting & Accelerated Payment AdministrationThe contract entails providing administrative support to ensure compliance with DFARS 52.232-40, focusing on the implementation of accelerated payments to small business subcontractors and the accurate submission of subcontracting reports. This support is critical for maintaining adherence to federal regulations designed to promote small business participation in defense contracting, requiring diligent tracking, documentation, and reporting of subcontractor payments and performance. The effort involves coordination between prime contractors and small business subcontractors to meet timely payment obligations and to fulfill statutory reporting requirements under the Defense Federal Acquisition Regulation Supplement. This solicitation is managed by the Fluid Handling Division within the Department of Defense, with performance taking place in New Cumberland, Pennsylvania, at zip code 17070-5002. The opportunity falls under NAICS code 541611, which corresponds to Management Consulting Services, indicating the need for strategic administrative and compliance-oriented expertise. The response deadline is set for July 29, 2026, and the posting date was July 24, 2026, suggesting a brief window for interested parties to submit proposals. The contract is classified as a subcontract opportunity under a defense acquisition framework, with no specific set-aside designation indicated, leaving eligibility open to qualified firms capable of delivering the required compliance and administrative services.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract involves regulatory compliance for hazardous materials used in connector assembly, requiring meticulous preparation of Safety Data Sheets (SDS) and proper labeling in accordance with OSHA and federal standards. The work focuses on ensuring all hazardous substances within the assembly process meet current federal safety and reporting requirements, with strict adherence to documentation protocols for chemical identification, handling, storage, and emergency response. Compliance must align fully with the Occupational Safety and Health Administration’s Hazard Communication Standard and other applicable federal regulations governing hazardous material management in industrial settings. The solicitation is issued under NAICS code 541620, categorized as a subcontract, and is managed by the Fluid Handling Division of the Department of Defense. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The opportunity was posted on July 24, 2026, and responses are due by July 29, 2026, leaving a five-day window for submission. All proposals must demonstrate proven expertise in SDS development, hazardous material labeling, and regulatory interpretation specific to defense-related manufacturing environments.

Environmental Consulting Services

POSTED

DEADLINE

Technical Data and Quality Compliance PackagingThe contract requires compliance with DLA RP001 and MIL-STD-2073-1E for the packaging, preservation, and labeling of connectors destined for government shipment, ensuring all materials are properly protected against environmental and mechanical damage during storage and transit. It mandates adherence to MIL-STD-129 for barcoding and external marking, guaranteeing accurate identification and traceability throughout the supply chain. All work must be performed to exacting military standards to maintain integrity and readiness of the supplied components. The solicitation is classified as a subcontract under NAICS code 493130, with a response deadline of July 29, 2026, and a posting date of July 24, 2026. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting activity falls under the Department of Defense's Fluid Handling Division, indicating the scope is tied to critical defense logistics and supply chain operations. Participation requires strict technical and quality compliance with no allowances for deviations from the specified military standards.

Farm Product Warehousing and Storage

POSTED

DEADLINE

Precision Connector Assembly ManufacturingThe contract involves the manufacture of a precision connector assembly identified by NSN 4730015440659, requiring strict adherence to government engineering source approval, compliance with all hazardous material restrictions, and military-standard packaging protocols. The work must be performed in accordance with defense-specific quality and safety standards, ensuring the final product meets operational requirements for critical military applications. The North American Industry Classification System code 334418 indicates the manufacturing focus on other electrical equipment and component fabrication. The solicitation is structured as a subcontract with a response deadline of July 29, 2026, and was posted on July 24, 2026. Performance is designated to occur at New Cumberland, Pennsylvania, with the contracting entity under the Department of Defense’s Fluid Handling Division. The contract does not specify a set-aside type or eligible business categories, and no point of contact details are provided within the listing. Interested parties must reference the DIBBS portal via the provided link for full documentation and submission requirements.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Packaging and Preservation Services per MIL-STD-2073-1EThe contract requires the provision of military-compliant packaging and preservation services in strict accordance with MIL-STD-2073-1E, covering all aspects of cleaning, wrapping, cushioning, and the selection of appropriate containers to ensure the integrity and longevity of defense-related items during storage and transit. The work must meet stringent military standards for environmental protection, handling, and durability, ensuring components remain functional and protected under extreme conditions. All processes must be executed with precision and documentation to validate compliance with the specified technical directives. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with a required performance location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and bids must be submitted by August 3, 2026. The NAICS code 488999 categorizes the service under Other Support Activities for Transportation, indicating it involves logistical and handling support rather than direct production. Interested parties must ensure they can fulfill the full scope of military packaging requirements as defined by the standard, with no allowances for deviation from the prescribed procedures or materials.

All Other Support Activities for Transportation

POSTED

DEADLINE

Supply Chain Traceability Documentation ServicesThe contract titled Supply Chain Traceability Documentation Services requires the development and ongoing maintenance of detailed supply chain traceability records in strict alignment with DLAD Procurement Note C03 and DLA Directive C03 to support audit readiness and regulatory compliance. The work is focused on ensuring accurate, complete, and accessible documentation of component origins, transformation pathways, and transaction histories throughout the supply chain, specifically for the Department of Defense’s Fluid Handling Division. Performance is expected to be carried out at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a subcontract opportunity classified under NAICS code 541610, indicating it pertains to management consulting services, and the solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026. All documentation must be structured to meet federal audit standards and support traceability requirements critical to defense logistics integrity.

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA Hazard Communication standards and applicable military regulations. The work is focused on ensuring accurate, standardized documentation for hazardous materials used within the Department of Defense’s Fluid Handling Division, with all deliverables meeting federal safety and labeling requirements. The performance location is specified as New Cumberland, PA, 17070-5002, indicating the need for localized support and potential on-site coordination with defense logistics operations. This is a subcontract opportunity under NAICS code 541690, classified as a professional, scientific, and technical service, and is open for responses until August 3, 2026. The solicitation was posted on July 24, 2026, and interested parties must align their technical proposals with both civilian and military compliance frameworks. While no set-aside designation is specified, bidders are expected to demonstrate proven expertise in hazardous materials documentation, experience with DoD procurement protocols, and the capability to maintain rigorous quality control over label and SDS accuracy to support operational safety across defense supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

First Article Testing (FAT) for Defense Item (NSN 4720-01-581-9015)First Article Testing is required for the defense item identified by NSN 4720-01-581-9015 to ensure full compliance with specified technical requirements before any full-scale production begins. The testing must be conducted thoroughly and documented in formal reports submitted to the Defense Logistics Agency to validate that all design, material, and manufacturing standards are met. This subcontract task is critical to confirming product integrity and readiness for deployment within the Department of Defense supply chain. The solicitation is open for responses until August 3, 2026, with performance expected to be completed at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code of 541380 indicates this work falls under scientific and technical consulting services, reflecting the engineering and quality assurance expertise needed to execute the testing. The contracting office is part of the Fluid Handling Division under the Department of Defense, and all deliverables must align with federal defense procurement protocols while meeting stringent quality benchmarks.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Defense Item with Radioactive Components (NSN 4720-01-581-9015)The contract pertains to the procurement and delivery of a defense item identified by NSN 4720-01-581-9015, which contains radioactive materials and must adhere to stringent regulatory and logistical standards. Compliance with 10 CFR is mandatory, ensuring all safety, handling, and transportation protocols for radioactive substances are strictly observed. The item must be marked in accordance with MIL-STD-129 and packaged under MIL-STD-2073-1E specifications to guarantee durability, protection, and proper identification throughout the supply chain. Full traceability of all components and materials is required from manufacture to final delivery, ensuring accountability and regulatory compliance at every stage. This is a subcontract opportunity issued by the Department of Defense’s Fluid Handling Division, with performance located at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026. The NAICS code 332999 classifies the work under Other Fabricated Metal Product Manufacturing, reflecting the specialized nature of the item’s fabrication. Interested parties must ensure their capabilities meet all technical, safety, and documentation requirements prior to submission, as failure to comply with any of the specified standards could result in rejection or non-performance. Access to full solicitation details is available via the provided DIBBS link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Sustainable & Environmentally Compliant Product SourcingThe contract titled Sustainable & Environmentally Compliant Product Sourcing requires the supplier to provide materials that strictly adhere to federal sustainability standards, with a focus on avoiding ozone-depleting chemicals and fully complying with government green procurement policies. This subcontract is issued by the Fluid Handling Division under the Department of Defense, with performance required in San Diego, California, at the zip code 92136-3581. The solicitation, identified under NAICS code 541611, was posted on July 24, 2026, and responses must be submitted by July 29, 2026, leaving a narrow five-day window for proposal submission. The emphasis is on environmental compliance, making adherence to sustainability criteria a non-negotiable requirement for award consideration, though no specific set-aside classification is designated. Interested parties must access the official solicitation through the provided DIBBS portal to ensure timely and complete submission.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity & NIST SP 800-171 Compliance SupportThe contract requires the implementation and documentation of cybersecurity controls to safeguard covered defense information in accordance with NIST Special Publication 800-171 and Defense Federal Acquisition Regulation Supplement (DFARS) requirements. The work is focused on ensuring full compliance with federal standards for protecting sensitive government data, including the development, integration, and verification of security measures across systems handling controlled unclassified information. The contractor will be responsible for assessing existing protocols, closing identified gaps, and providing detailed documentation to demonstrate adherence to regulatory mandates. The contract is a subcontract under the Department of Defense’s Fluid Handling Division, with performance location specified as San Diego, California, ZIP 92136-3581. It falls under NAICS code 541512, which pertains to computer systems design and related services, indicating a technical and consultative scope. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, suggesting a tight turnaround for proposals. The effort is mission-critical for safeguarding national defense information, and successful submission must align precisely with NIST 800-171 controls and DFARS clause requirements without deviation.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract titled Hazardous Materials Compliance & SDS Management requires the identification, classification, and thorough documentation of hazardous materials in alignment with OSHA and Defense Logistics Agency standards. A primary responsibility is the accurate preparation and timely submission of Safety Data Sheets for all regulated substances, ensuring compliance with federal workplace safety and environmental protocols. The work is focused on supporting the Fluid Handling Division of the Department of Defense with operations based in San Diego, zip code 92136-3581, where all hazardous material activities must be managed according to stringent government requirements. This is a subcontract under NAICS code 541620, which pertains to scientific and technical consulting services, indicating the need for specialized expertise in chemical safety and regulatory compliance. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, suggesting a narrow window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is part of a federal procurement managed through the DIBBS platform, emphasizing its importance within the defense logistics framework. All deliverables must meet exacting federal standards to ensure operational safety and regulatory adherence across DoD facilities.

Environmental Consulting Services

POSTED

DEADLINE