Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SEAT, HELICAL COMPRESSI

Open
SPE4A6-27-Q-0246Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, solicitation SPE4A6-27-Q-0246, is a small business set-aside for the procurement of 310 units of helical compression spring seats, identified as a critical application item under Hamilton Sundstrand Corporation part number 706606. The agreement is established as a firm fixed price contract with a delivery requirement of 136 days after order. Both inspection and acceptance will occur at the destination, specifically the DLA Distribution Depot in Oklahoma. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, with specific focus on covered defense information, packaging, and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must comply with MIL-STD-129 and RP001, with non-hazardous materials following ASTM D3951. Award determination is based on a comparative assessment of price and non-price factors, where past performance, particularly SPRS assessments, is weighted more heavily than quoted delivery. Invoicing and payment are managed electronically through the Wide Area WorkFlow system.

General Info

Small business contract for 310 helical compression spring seats via firm fixed price.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332613 - Spring Manufacturing

Place of Performance

OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first25 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Mollie Reddy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAT, HELICAL COMPRESSION SPRING: RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
HAMILTON SUNDSTRAND CORPORATION 99167 P/N 706606
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-27-Q-0246
SECTION B
SUPPLY/SERVICE: 5340-00-295-2340 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 5340-00-295-2340 310.000 EA $ _______________ $ ______________ SEAT,HELICAL COMPRESSION SPRING
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 136 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016337129 0001 N/A N/A N/A 11/30/2026

SPE4A6-27-Q-0246 NSN/Part Number: 5340-00-295-2340 Quantity: 310 EA Purchase Request: 7016337129QTY: 310 Delivery: 136 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturerThis subcontract involves the manufacture of 846 helical compression springs for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to SAE AS13572 Revision A and meet quality standards MIL-STD-1916 or ASQ H1331. To ensure compliance with NSN 5360-00-890-4622 tolerances, the manufacturer must utilize spring coiling and winding machinery, as additive manufacturing is explicitly prohibited. The project is managed under NAICS code 332613 for the Department of Defense, with the place of performance located in Greensboro, North Carolina. Interested parties must note the response deadline of November 20, 2026, to provide the required finished components.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Supply of Aerospace-Grade Alloy Steel/Fastener StockThis subcontract involves the supply of aerospace-grade alloy steel bar or wire stock to prime contractors supporting the Department of Defense, specifically for the DLA Weapons Support ASC Commodities Division. The scope of work requires the delivery of certified raw materials that strictly adhere to the chemical and physical properties outlined in NAS6303 through NAS6320 and QAP 13873. To ensure quality for critical application items, the provider must furnish comprehensive Material Test Reports and Certificates of Conformance. The project is categorized under NAICS code 332613 and is designated for performance in New Cumberland. Interested parties should note the response deadline of November 17, 2026, following the posting date of November 10, 2026. This agreement focuses on the procurement of high-specification fastener stock essential for aerospace defense projects.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M1-27-T-1755
This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 321 helical compression springs, identified as NSN 5360-00-844-1571 and part number 69-2124. Classified as a critical application item, the hardware must be delivered FOB Origin to Industries of the Blind Inc. in Greensboro, North Carolina, within 129 days after order. The procurement is governed by NAICS code 332613 and requires strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for preservation, and MIL-STD-129 for marking. The contract mandates that mercury or mercury-containing compounds shall not be intentionally added to the supplies, with specific exceptions for functional mercury as defined by NAVSEA. Technical and quality requirements are further detailed in the DLA Master List via references RA001 and RQ011. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Evaluation for award may include a HUBZone price preference, and the government will not consider offers utilizing additive manufacturing. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is required.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7M4-27-T-1388
Solicitation SPE7M4-27-T-1388 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for the supply of 38 helical compression springs, identified by NSN 5360-00-562-3345. The contract requires delivery to Industries of the Blind Inc in Greensboro, North Carolina, with a need ship date of April 6, 2027, and an original required delivery date of May 15, 2027. The procurement is categorized under NAICS code 332613 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, specifically RA001, and the removal of government identification from non-accepted supplies is mandated per RQ011. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Inspection and acceptance will occur at the destination. Offerors must comply with the Buy American Act and Berry Amendment restrictions. Invoicing is to be processed electronically through the Wide Area WorkFlow system. The solicitation also includes specific DFARS and FAR clauses regarding cybersecurity, hazardous material labeling, and HUBZone price evaluation preferences.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-27-U-0134
Solicitation SPE7L1-27-U-0134 is a total small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of helical compression springs, identified by NSN 5360012259676. This critical application item is being sought under a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and a one year period of performance. The estimated quantity is 312 units, though the government guarantees a minimum of 46 units once the contract becomes binding. Quotations are due by November 10, 2026, and must be submitted via DIBBS. The contract requires delivery within 46 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. All supplies must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Notably, the government will not evaluate or award to any offer including items produced via additive manufacturing. Contractors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-27-T-4529
This fixed-price solicitation, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 846 helical compression springs under NSN 5360-00-890-4622. The items must be manufactured in accordance with the current revision of the applicable part standard, specifically referencing SAE AS13572 Revision A. The contract specifies a delivery period of 164 days after order, with a required delivery date of May 9, 2027, shipped FOB Origin to Industries of the Blind Inc in Greensboro, NC. The procurement is designated as a Small Business Set-Aside and may be eligible for automated award. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Key restrictions include a prohibition on Class I ozone-depleting chemicals and a ban on items produced via additive manufacturing unless specifically authorized. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material preferences, and hazardous material identification.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-27-T-2926
Solicitation SPE7L1-27-T-2926, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the procurement of 744 helical compression springs (NSN 5360002055471). The requirement is categorized under NAICS 332613 and is issued under the First Destination Transportation program. Delivery is required within 98 days after receipt of order, with an original required delivery date of January 18, 2027, and a need ship date of February 26, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona, with both inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Special restrictions prohibit the use of additive manufacturing unless authorized and forbid the intentional addition of mercury or mercury-containing compounds. Compliance with the Buy American Act, Balance of Payments Program, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
Manufacturing and Supply of Helical Torsion Springs (NSN 5360-01-225-6475)This subcontract involves the manufacturing and supply of precision helical torsion springs, specifically NSN 5360-01-225-6475, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the springs using specialized winding and coiling machinery in strict accordance with the DLA Master List RA001 technical requirements. Compliance is mandatory for several federal standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must adhere to the Berry Amendment, the Buy American Act, and DFARS 252.204-7012 regulations. The solicitation was posted on November 10, 2026, with a response deadline of November 24, 2026, under NAICS code 332613.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
Manufacturing of Helical Compression Springs (NSN 5360-01-389-0064)This subcontract involves the manufacturing and supply of 382 helical compression springs for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating the springs to Part Number 744429-A00 engineering tolerances in accordance with DLA Master List RA001. Strict adherence to material standards is required, specifically ensuring that all components are free of mercury and that materials comply with DFARS 252.225-7001. Production must be carried out using precision winding machinery to meet the necessary technical specifications. Once completed, the 382 finished springs must be packaged and labeled according to MIL-STD-2073-1E and MIL-STD-129 standards. This project falls under NAICS code 332613 and supports prime contractors operating within the nuclear reactor program.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
Leaf Spring ManufacturingThis subcontract involves the manufacture and supply of leaf springs for prime contractors supporting the DLA Weapons Support Land Supplier Opns Engines. The scope of work requires the fabrication of two specific leaf springs that adhere to NSN 5360-01-384-1306 and P/N H41615-865-4 specifications. As these are designated as Critical Application Items, the provider must ensure all units are fully completed and inspected prior to delivery. The contract mandates strict adherence to regulatory standards, including the Buy American Act and NAVSEA 5300-003D mercury restrictions. Managed under NAICS code 332613 for the Department of Defense, the solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
53--SPRING,LEAF
Solicitation # SPE7L5-27-T-0702
Solicitation SPE7L5-27-T-0702 is a small business set-aside issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of two leaf springs, identified by NSN 5360-01-384-1306. The contract specifies a delivery timeframe of 130 days after order, with a need ship date of July 7, 2026, and a required delivery date of November 19, 2026. Shipping is FOB Origin, with the final destination and inspection/acceptance point located at Arizona Industries for the Blind in Phoenix, Arizona. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional uses approved by NAVSEA. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS cybersecurity reporting and domestic material restrictions, such as the Buy American Act and Berry Amendment. Quotations must be submitted via DIBBS by November 20, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
53--SPRING,HELICAL,COMPRES
Solicitation # SPE7M2-27-T-0861
This contract, issued by the DLA Weapons Support Nuclear Reactor Program, is a small business set-aside for the procurement of 382 helical compression springs (NSN 5360-01-389-0064), identified as a critical application item with part number 744429-A00 from L3Harris Maritime Power & Energy. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of March 8, 2028, and a need ship date of April 26, 2027. Delivery is required 156 days after order, and both inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement is subject to strict technical and quality requirements found in the DLA Master List, with specific prohibitions against the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow RP001 requirements. The contract incorporates several key regulatory clauses, including the Buy American and Balance of Payments Program (DFARS 252.225-7001), cybersecurity reporting (DFARS 252.204-7012), and prohibitions on covered defense telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 488410
New
DIBBS
Military-Spec Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical hardware supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the preservation and marking of 38 hardware units for shipment from their origin, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must apply Preservation Method 31 utilizing compliant labeling equipment and military-grade packaging materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. Interested parties should note the response deadline of November 17, 2026, for this requirement categorized under NAICS code 488410.
Motor Vehicle Towing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Screw Fabrication (NSN 5305-01-122-2830)This subcontract involves the fabrication of 38 precision screws, part number 99136454, for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC equipment to perform precision machining according to OEM drawings. All materials must be mercury-free in compliance with NAVSEA requirements, and the final delivery must meet a zero non-conformance standard per MIL-STD-105/ASQ Z1.4. Quality control must be maintained through inspection systems adhering to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 17, 2026, regarding this requirement under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332813
New
DIBBS
CAD Plating Services for Steel HardwareThis subcontract involves providing specialized CAD plating services for steel hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes surface preparation, cleaning, and the application of clear anodic or chemical plating to steel stepped studs to ensure necessary corrosion resistance. The contractor must utilize appropriate chemical plating baths and curing equipment while strictly adhering to prohibitions regarding hexavalent chromium and maintaining compliance with RQ006 quality conformance standards. The project requires the delivery of four CAD-plated stepped steel studs under NAICS code 332813. This requirement is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 17, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Stepped StudsThis subcontract involves the precision machining and fabrication of stepped steel studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires turning steel stock to create a specific stepped profile and threading the stud ends in strict accordance with the technical data package for NSN 5307-00-637-1615. To successfully execute the contract, the provider must utilize CNC lathes or precision manual turning equipment. The project mandates strict adherence to RQ006 quality conformance and requires sampling based on MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of four unfinished stepped steel studs accompanied by a Certificate of Quality Compliance. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves specialized military packaging, marking, and palletization executed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The contractor is responsible for utilizing MIL-SPEC preservation materials and industrial equipment to prepare and deliver shipments under the First Destination Transportation program for FOB Origin delivery. The opportunity is a total small business set-aside under NAICS code 488510 for the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties must respond by November 17, 2026, to provide these essential logistics services for the DLA Weapons Support ASC Commodities Division.
Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Plain Hexagon Nuts (NSN 5310-01-166-6393)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 1,040 plain hexagon nuts under NSN 5310-01-166-6393. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in Texarkana. Production must strictly adhere to TDP Rev A Gen 1, QAP 19207, and the DLA Master List of Technical and Quality Requirements. To qualify, contractors must utilize precision machining equipment and maintain specific security and regulatory certifications, including CMMC Level 2 compliance and certification under the US/Canada Joint Certification Program for export control. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Destination DeliveryThis subcontract involves providing specialized military packaging and shipping services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging, as well as MIL-STD-129 for shipment marking. To ensure the integrity of the items, the contractor must utilize approved MIL-SPEC preservation and cushioning materials. The final completed assemblies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.
Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
Aerospace-Grade Electrical Components SupplyThis subcontract for Aerospace-Grade Electrical Components Supply involves providing raw materials and specialized components to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the delivery of high-reliability connectors, shielding, and MIL-SPEC wiring specifically for part number 1641030-1. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334419. Strict adherence to regulatory standards is required, including compliance with the Buy American Act, the Berry Amendment, and NAVSEA 5100-003D mercury-free mandates. All delivered components must be accompanied by full Certificates of Conformance and comprehensive traceability documentation. The response deadline for this opportunity is November 17, 2026.
Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of six special purpose electrical cable assemblies, specifically part number 1641030-1, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in New Cumberland and requires strict adherence to zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must comply with NAVSEA 5100-003D mercury-free standards and be fully tested and marked upon delivery. From a regulatory and security standpoint, the contractor is required to maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment. The project falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties should note the response deadline of November 17, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Socket Head Cap Screw Supplier (NSN 5305005504246)This subcontract involves the supply of 33 socket head cap screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these critical application fasteners according to NSN 5305005504246 specifications, with a strict prohibition on the use of additive manufacturing. Performance will take place at Tinker AFB. The contractor must ensure strict adherence to quality assurance standards MIL-STD-1916 or ASQ H1331, as well as compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. All deliveries must be accompanied by a Certificate of Quality Compliance to verify that the fasteners meet the necessary requirements for critical application.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
Raw Material Supply for Aerospace WashersThis subcontract involves the supply of raw forged or cast metal blanks for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the casting or forging of metal to specific dimensions and grades as mandated by NAS1149 Revision 8. All materials must be free of mercury or mercury compounds and strictly adhere to the Buy American Act. The selected provider is responsible for delivering the raw blanks along with comprehensive material certifications to prove compliance with aerospace standards. This project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located in Tracy, California.
Rolled Steel Shape Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture and Supply of NAS1149 Flat WashersThis subcontract involves the manufacture and supply of 2,597 finished flat washers, identified by NSN 5310-01-499-8065, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced according to Basic Non-Govt Std NAS1149 Revision 8 using casting or forging processes, as additive manufacturing is strictly prohibited. All deliverables must be packaged in accordance with MIL-STD-2073-1E and delivered to Tracy, California. To qualify, the supplier must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. Quality assurance requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332613
Awarded
DIBBS
SPRING, FLAT
Solicitation # SPE7LX-26-U-9768
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-27-T-4469
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-27-T-035Q
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSION
Solicitation # SPE7L1-27-T-4494
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSION
Solicitation # SPE7L1-27-T-4508
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-27-T-4472
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-27-T-029S
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332613
Awarded
DIBBS
SPRING
Solicitation # SPE7L1-26-T-791U
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332613
New
Federal
SPRING,HELICAL,COMP
Solicitation # N0010427QBC03
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 332613
New
DIBBS
Clinch Nut Manufacturing and Supply
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332613
New
DIBBS
Flat Spring Fabrication (NSN 5360-01-667-0135)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
Supply of Shear Bolts (NAS6704-8)
DLA FLEET READINESS CENTER DLA PSC

POSTED

2 days ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS