Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

SEAT, WATER CLOSET

Active
SPE8E8-26-T-4972Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits six water closet seats under NSN 4510-01-056-3442 for delivery within 167 days after order placement, with a purchase request number of 7017758140. The solicitation, issued under SPE8E8-26-T-4972, was posted on August 5, 2026, and responses are due by August 17, 2026. It is governed by the DLA Master List of Technical and Quality Requirements, which incorporates all referenced technical and quality standards identified by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The contract requires compliance with DLA packaging standards and includes provisions for the removal of government identification from non-accepted supplies. Covered defense information may apply, and performance is designated to Tinker AFB, Oklahoma, 73145-8000. The contracting office is under the Department of Defense, specifically Depot Oklahoma, with Alexis Selby designated as the primary point of contact, reachable via email and phone. The NAICS code 326199 indicates the product falls under other plastic product manufacturing, and no set-aside type is specified.

General Info

Six water closet seats ordered under NSN 4510-01-056-3442, delivery in 167 days, Tinker AFB, DLA standards apply.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-4972.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUS

Full Description

Show more
SEAT,WATER CLOSET
SEAT, WATER CLOSET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 4510-01-056-3442 Quantity: 6 EA Purchase Request: 7017758140QTY: 6 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326199
New
DIBBS
MOLDING, PLASTIC
Solicitation # SPE8E5-26-T-3855
The contract pertains to the procurement of a plastic molding item identified by NSN 9330-01-276-1782 and part number 342-83004-1, supplied by BRISTOL AEROSPACE LTD in Winnipeg, Canada. A total quantity of 31 units is required at a unit price of $31.00, with delivery scheduled 148 days after contract award, FOB origin, and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with MIL-STD-130N for identification marking of U.S. military property. Packaging must adhere to DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous materials must be commercially packaged per ASTM D3951 unless otherwise directed by DLA requirements, and all packaging and labeling must follow MIL-STD-129. Palletization is mandatory per DLA Packaging Requirements. The item is not classified as hazardous under FED-STD-313, so special hazard packaging is not required. Delivery must be made to DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with a need ship date of June 30, 2026, and an original required delivery date of April 2, 2027. The solicitation number is SPE8E5-26-T-3855, issued under a federal procurement process with a NAICS code of 326199, and responses were due by August 17, 2026. All technical and quality specifications are governed by the DLA Master List referenced in the solicitation, and transportation logistics must follow DLAD Proc Notes C19 and C20.
JACKSONVILLE BLDG

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3857
The contract specifies the procurement of FILAMENT, ADDITIVE M with NSN 9330016983414 and part number 355-02142 from STRATASYS, INC, for a quantity of 2 units at a unit price of $0.000, totaling $0.000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede ASTM D3951 if applicable. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with hazardous material requiring adherence to TQ requirement IP025 according to FED-STD-313, while non-hazardous material must meet commercial packaging standards unless overridden by DLA directives. Delivery is FOB origin with a 167-day delivery window, original required delivery date of October 15, 2026, and a needed ship date of February 1, 2027. Inspection and acceptance occur at destination with zero variance allowed. Packaging and marking must include the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. The shipment destination is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3857, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326199, and point of contact is Khue Nguyen at DLA.
ALBANY TRANSPORTATION OFFICER

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
Supply of Padded Divider Sets and Protective Packaging ComponentsThe contract seeks the supply of custom padded divider sets and protective internal packaging components designed to meet strict DLA specifications and ensure compatibility with MIL-STD-129 and RP001 standards. These packaging elements are critical for the safe handling, storage, and transportation of military equipment, requiring precise engineering and material selection to provide adequate cushioning, structural integrity, and compliance with defense logistics protocols. All delivered items must be manufactured to exact dimensional and functional requirements to integrate seamlessly with existing military supply chain systems. The solicitation is classified as a subcontract under NAICS code 326199, which covers other plastics product manufacturing, and is issued by the Department of Defense through the Construction & Equipment T & IFO EQ office. The place of performance is designated as Fort Campbell with a zip code of 42223-5000, indicating the intended operational use and logistical hub for the delivered goods. Responses are due by August 17, 2026, with the opportunity posted on August 4, 2026, allowing potential vendors ample time to prepare compliant proposals through the DIBBS platform at the provided link. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or status.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
PLASTIC MOLDING KIT
Solicitation # SPE8E5-26-T-3760
The contract pertains to the procurement of a Plastic Molding Kit with NSN 9330-01-481-4339 and part number FOAM,FRL 6706, under solicitation SPE8E5-26-T-3760, issued by the Defense Logistics Agency Distribution Oklahoma City. The item is classified as a Critical Application Item with a Type II shelf life of six months, extendable, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating shelf life code 33. Packaging must avoid plastics as wrapping, cushioning, or dunnage where possible, and palletization must adhere to DLA requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances expected unless otherwise stated. The contract specifies delivery of one kilogram within five days FOB origin, with inspection and acceptance occurring at destination, and prohibits parcel post shipping—requiring traceable freight methods only. The delivery address is Tinker Air Force Base, Oklahoma, with specific marking, packaging, and hazardous material handling instructions under IP025. The purchase request number is 7017719797, and the required delivery date is August 3, 2026.
DLA DIST OKC KO CP

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 332112
New
DIBBS
STRUCTURAL SECTION,
Solicitation # SPE8E4-26-T-1962
The contract specifies the procurement of 31 units of a structural section made from 6061 aluminum alloy in T4 temper, extruded to a length of 12 feet with part number BAC1520-606 and national stock number 9540-01-482-2307. Each part must be marked per MIL-STD-130 with the NSN, part number, current design authority code 98748, actual manufacturer’s cage code, date of manufacture, and the phrase “FOR MILITARY USE ONLY,” explicitly prohibiting the use of Boeing’s original cage code. Packaging must comply with DLA’s RP001 requirements, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals in the U.S., with DFARS 252.225-7048 enforcing compliance. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed required DLA training and questionnaire, and have received formal approval. Delivery is due 167 days after award under solicitation SPE8E4-26-T-1962, issued by the Department of Defense through Depot Oklahoma at Tinker AFB, with responses due by August 17, 2026, and primary point of contact Pamela Duffey.
Nonferrous Forging

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3785
The contract specifies a plastic sheet manufactured using the cast method from acrylic, with dimensions of 48 inches long by 36 inches wide and a thickness of 0.187 inches. It must be plain, transparent, colorless, and fully comply with Type 1, Class 1, Finish A requirements as defined by MIL-PRF-8184F, and adhere to QPL 8184, with only QPL-approved manufacturers eligible to supply the product at the time of award. The item is classified as a critical application component, and all technical and quality specifications referenced by R-numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any commercial standards such as ASTM D3951. The product must be packaged in accordance with RP001 DLA Packaging Requirements for Procurement and labeled per MIL-STD-129, with hazardous material handling following FED-STD-313 and TQ requirement IP025 if applicable. The contract calls for 21 ship units with zero variance allowed in quantity and requires delivery FOB origin within 167 days, with the final delivery deadline set for February 1, 2027. Inspection and acceptance occur at the destination, and packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery destination is DLA Distribution Depot Oklahoma at Tinker AFB, with all transportation subject to DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3785, with a response deadline of August 17, 2026, and the primary point of contact is Brandon Wicker. The NSN 9330-00-634-8636 is linked to a government procurement under a federal solicitation, and the offeror must guarantee that all components originate exclusively from qualified sources on the approved QPL.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1968
This contract specifies the procurement of aluminum alloy sheet metal with precise dimensional and material requirements: 0.050 inches thick, 48.00 inches wide, and 144.00 inches long, weighing approximately 33.50 pounds per sheet. The material must conform to alloy 5052 in the O-annealed temper, as defined by SAE AMS-QQ-A-250/8C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution that may trigger criminal penalties. All sheets must be supplied in whole-foot lengths only and must be marked with continuous identification including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, using approved methods such as stamping or stenciling that ensure legibility and durability without contamination. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the contracting officer. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129R, with preservation governed by ASTM B660, and all units must be palletized as per DLA packaging requirements. Delivery is FOB origin, with no variance allowed in quantity, and the product must be delivered to Tinker AFB, Oklahoma, within 167 days of contract award. The contract explicitly waives source inspection requirements for QSL-compliant suppliers, with critical application status and technical data package requirements enforcing full adherence to all cited specifications.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332323
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-4981
The contract specifies the procurement of a heating element, electrical, nonimmersion type, with part number 037-003345-001 and NSN 4520012993607, under solicitation SPE8E8-26-T-4981. A total quantity of eight units is required to be delivered within 167 days of award, with delivery FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. The contract mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies to covered defense information. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, with a required ship date of February 1, 2027, and original delivery deadline of March 13, 2027. The unit price is $8 per unit, totaling $64, with zero variance allowed in quantity. The contracting activity is under the Department of Defense, with Alexis Selby designated as the point of contact, and the NAICS code is 332323 for other electrical equipment manufacturing.
Ornamental and Architectural Metal Work Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-Q-0394
The contract pertains to the procurement of 10 units of a check valve identified by NSN 4820-01-020-1040, supplied by HYDRO-AIRE AEROSPACE CORP with part number 38-491, classified as a critical application item. Delivery is required 272 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements for Procurement, and the DLA Master List of Technical and Quality Requirements takes precedence over any conflicting standards. The valve must not contain or come into direct contact with mercury or mercury compounds, except under specific exceptions for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; where permitted, portable devices must include shock-proof housing and a secondary containment boundary per NAVSEA 5100-003D. The quantity is strictly fixed with no variance allowed, and the item is to be shipped to the DLA Distribution Depot in Tinker AFB, OK, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7MC-26-Q-0394, posted on August 5, 2026, with a response deadline of August 12, 2026, and the purchase request is 7007472465, with a required delivery date of December 5, 2024.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L7-26-Q-2086
This contract specifies the procurement of nickel cadmium battery assemblies under NSN 6140-01-539-2831, with a total quantity of 28 units across two line items, each subject to firm fixed pricing and zero variance in quantity. The batteries must meet stringent technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, and must comply with MIL-PRF-81757/18A(1) specifications as amended, including a modified constant current charging method requiring 30 amperes until 15.5 volts is reached, followed by 11 amperes for three additional hours. Each unit carries a Type I shelf life of 60 months, non-extendable, and must be labeled accordingly with special marking code 32. All components must be sourced exclusively from qualified manufacturers or products listed on the approved QPL/QML, and the contractor is prohibited from introducing mercury or mercury-containing compounds except in functional applications such as batteries, with specific containment requirements for portable devices. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, including hazardous material protocols under IP025. Inspection and acceptance occur at origin, with shipment permitted only after completion of government lot acceptance testing, and samples excluded from the contract quantity. Delivery is due within 255 days after award for the batteries, and 135 days for associated production lot testing items. The contractor must submit approved Safety Data Sheets and Hazardous Communication Standard-compliant labels, and ensure employee training per 29 CFR 1910.1200. ISO 9001 quality management system compliance is mandatory on the contract date, and no lot may be released until final approval is granted by the qualifying activity.
Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3798
This contract specifies the procurement of 2,042 rotary file units with tungsten material, featuring a right-hand spiral fluting, ball shape, a head diameter of .250 inches, head length of .218 inches, overall length of 2.0 inches, and a .250-inch shank with a medium-cut 16 to 20 teeth per circumference. The product must comply with specification A-A-51154B-2A7B Rev B and meet the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The items are subject to MIL-STD-130N for identification marking of U.S. military property and must be packaged in accordance with ASTM D3951, with labeling and packing strictly following MIL-STD-129 as mandated by DLA’s packaging requirements. All units must be palletized per RP001 and identified with the NSN 3455-01-045-9154 and part number AA51154B-2A7B. The contract is issued under solicitation SPE8E5-26-T-3798 with a delivery requirement of 167 days from the award date, FOB origin, and inspection and acceptance occurring at the destination. No quantity variance is permitted. The sole delivery point is the DLA Distribution Depot Oklahoma at Tinker AFB, with a required ship date of February 1, 2027, and the original delivery deadline set for December 23, 2026. All packaging must include exact unit of issue and quantity per unit pack as defined in the contract and must remove any government identification from non-accepted supplies. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA) at a unit price of $0.00, totaling a contract value based on the specified quantity. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under a federal procurement classified under NAICS code 333515.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-3997
This contract, issued under solicitation SPE8E6-26-T-3997 by the Department of Defense through DLA Distribution Depot Oklahoma, specifies the procurement of three units of Plate, Instruction with NSN 9905-00-881-6118 at a unit price of $3.00, totaling $9.00. Delivery is required FOB origin within 167 days, with inspection and acceptance occurring at the destination. The quantity is fixed at zero variance, and packaging must comply with ASTM D3951 while adhering strictly to DLA Master List requirements, particularly RP001 for packaging and MIL-STD-129 for marking and labeling. All technical and quality specifications referenced by R or I numbers are governed by the current DLA Master List revision effective on the solicitation issue date, and these take precedence over any other standards. The item must be palletized per RP001, and government identification must be removed from non-accepted supplies as per RQ011. The delivery address is Tinker AFB, Oklahoma, and the required ship date is February 1, 2027, with an original delivery deadline of March 13, 2027. Transportation instructions follow DLAD Proc Notes C19 and C20. Documentation for source approval must meet RC001 requirements, and the contract incorporates covered defense information protocols as noted in RD003. The point of contact is Tai Nguyen, with the solicitation posted August 5, 2026, and response due by August 17, 2026.
Sign Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
GLOVES, FIREMEN'S
Solicitation # SPE8E6-26-T-4013
This contract is for the procurement of firemen’s gloves under solicitation SPE8E6-26-T-4013, a total small business set-aside with a NAICS code of 333998. The item, identified by NSN 8415-01-335-7904 and part number 5200, is to be supplied by Shelby Group International, Inc., with a quantity of 199 units delivered FOB origin within 60 days of contract award, targeting a need ship date of August 4, 2026, and an original delivery deadline of December 2, 2026. The contract strictly enforces compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking required. Packaging must use preservative method 10, dry climate control, and unit containers designated as OPI O with intermediate containers marked D3. All supplies must be free from intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shock-resistant construction and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at destination, with zero variance permitted in quantity. Delivery is directed to DLA Distribution Depot Oklahoma at Tinker AFB, and transportation protocols follow DLAD Proc Notes C19 and C20. The contract references technical and quality standards from the DLA Master List, with the applicable revision controlled by the solicitation issue date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1949
Steel bar, UNS K23080, round, 1.250 inches in diameter, must be supplied in whole-foot lengths between 10 and 12 feet, at approximately 4.170 pounds per foot, and must fully comply with SAE AMS6411K Revision K and SPE8E4-26-T-1949 Section B. Every unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions; markings must be legible, waterproof, and non-contaminating, applied via stenciling or approved methods excluding die stamping. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire. A Certificate of Quality Compliance, including mill certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement constitutes an exception that must be explicitly noted; non-compliant products may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation per ASTM A700 and marking compliant with MIL-STD-129, using special code ZZ. All shipments are FOB origin, with a 10% quantity variance allowed, inspected and accepted at destination, and must be delivered within 167 days to Tinker AFB, Oklahoma. The required delivery date is November 28, 2026, with a need ship date of February 1, 2027.
Iron and Steel Forging

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details