Security Forces Weapons Rack System

SITE VISIT INFORMATION DATE: July 20th, 2017 TIME: 2:00 pm LOCATION: Offutt AFB, Security Forces Squadron Contractors that do not have base access will need to meet at the STRATCOM gate and will be escorted to the site location. QUESTIONS: Is the track to be installed fully grouted and anchored to the concrete slab? YES Is the track to be seismic, anti-tip for end user safety? YES Are the mobile carriages to have a mechanical safety sweep in each aisle in addition to the plunger lock on the ends of the mobile carriages? NO NOT NEEDED Is there to be an entry ramp on both ends of the system? YES Are the carriages to have full height steel end panels with card holders on both sides of the system? YES Is the flooring to be finished with rubber floor covering to best match the existing floor covering inside of the armory? YES REQUIRED BY AFMAN 31-129 Is the mobile carriage system to have a full system lock to lock down the entire carriage system? YES FULL SYSTEM LOCK IS REQUIRED Weapon Storage Questions: Are the weapon racks to have fully slotted back panels in each weapon rack? This allows for adjustment of components v systems that have partial slotting and limited adjustability. YES FULL ADJUSTMENT IS NEEDED FOR THE CHANGE IN OUR "INVENTORY" CHANGES VERY FREQUENTLY Are the weapons to have individually adjustable barrel saddles with built in retainer cords to keep the barrels secured while stored? YES Are the weapons to have adjustable weapon holders that secure the front and back of each buttstock to prevent lateral movement while being stored? YES Are the weapons to be stored staggered, inverted (upside down), front to back (perpendicular), horizontally or vertically and laterally in a straight line? VERTICALLY Are the pistols to be stored on pegs? YES, RUBBERIZED PEGS Is the existing mobile carriage system to be DRMO'd? EXISTING SYSTEM NEEDS TO BE REMOVED AND DISPOSED OF BY CONTRACTOR