Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Security Systems and Access Control

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE
Solicitation # 140FF027Q0033
The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
Federal
Z--OR-FWS SHELDON NWR-INSTALL WOOD STOVE
Solicitation # 140FF027Q0043
The U.S. Fish and Wildlife Service is conducting market research through a Sources Sought Synopsis for the installation of a mobile home compliant wood-burning stove system at the Sheldon National Wildlife Refuge in Denio, Nevada. The project requires a contractor to provide all labor, materials, supervision, and equipment necessary to install a government-furnished Jotul F035 stove, along with a complete chimney system, hearth pad, wall protection, and required smoke and carbon monoxide detectors. The resulting contract will be a Firm-Fixed-Price agreement with a period of performance spanning 120 days from the Notice to Proceed. Interested firms must be registered in SAM.gov and provide their CAGE code, UEI, and business size based on NAICS code 238290. Qualified contractors must demonstrate prior experience by providing up to three relevant projects completed within the last five years and must be licensed and compliant with OSHA requirements. All work must adhere to NFPA 211, the International Residential Code, the International Building Code, and ADA Accessibility Guidelines. Final acceptance is contingent upon successful operational testing, verification that the roof is weather-tight, and the submission of all warranties and closeout documents. Responses to this synopsis must be submitted electronically to Contracting Officer Cindy Salazar by November 6, 2026.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
Federal
Z--OR-FWS SHELDON NWR-RE-KEY HQ
Solicitation # 140FF027Q0036
The U.S. Fish and Wildlife Service is conducting market research through a sources sought synopsis for a firm-fixed-price contract to replace and modify interior and exterior door hardware at the Sheldon National Wildlife Refuge in Denio, Nevada. The primary objective is to convert the facility to a Best Lock interchangeable core system to ensure compatibility with other refuge facilities. The scope of work includes providing all labor, materials, and equipment necessary for installation, as well as performing field verification of door types and frame configurations. All work must adhere to the International Building Code, ADA Accessibility Guidelines, ANSI/BHMA standards, and OSHA safety regulations. Interested firms must be registered in SAM.gov under NAICS code 238290 and submit their capabilities statement by November 6, 2026. Responses are limited to five pages and must include a maximum of three relevant projects completed within the last five years, along with detailed contract data and socioeconomic status. The government is using this process to determine if the requirement can be set aside for small businesses or other socioeconomic programs such as HUBZone or EDWOSB. While the period of performance is listed inconsistently as either 60 or 120 days from the notice to proceed, final acceptance will be based on successful inspections, operational testing, and the submission of warranties and closeout documents.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days

AI Contract Overview

Show more

The contract encompasses the installation of comprehensive electronic security systems at federal facilities, specifically focused on Fort Irwin, California, with a zip code of 92310-9986. It includes the deployment of electronic access control, intrusion detection, closed-circuit television, and integrated security infrastructure designed to enhance physical and operational security across the site. The scope requires full system integration to ensure seamless coordination between hardware, software, and monitoring platforms, aligning with federal security standards and operational requirements. This is a subcontract opportunity under the NAICS code 238290, issued by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026. Bidders must be prepared to deliver and install all components at the designated location, manage system testing and commissioning, and provide documentation for ongoing maintenance and compliance. No set-aside status is specified, and while the point of contact details are not provided, all submissions must be directed through the designated DIBBS portal at the published link.

General Info

Install electronic security systems at Fort Irwin, CA, per federal standards, via DOD subcontract by July 31, 2026.

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

FORT IRWIN, CA, 92310-9986, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-09FX.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, RADI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electronic access control, intrusion detection, CCTV, and integrated security systems for federal facilities.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24UD
Solicitation SPE4A6-26-T-24UD is a request for the procurement of 397 machine screws, identified by NSN 5305016513531, for the DLA Aviation ASC Commodities Division. The contract is established as FOB Origin with destination inspection and acceptance. Delivery is required within 144 days, with an original required delivery date of December 7, 2026, and a need ship date of January 31, 2027. All shipments must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is a critical component of this procurement, requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001. The contract mandates adherence to MIL-STD-130N for item marking, MIL-STD-129 for packaging labels, and ASTM D3951 for general packaging, with DLA Master List requirements taking precedence. Sampling shall follow MIL-STD-1916 or ASQ H1331, with a zero non-conformance requirement for acceptance. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and HUBZone price evaluation preferences. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offerors are encouraged to provide quantity ranges in their quotes via the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-971Z
Solicitation SPE4A6-26-T-971Z is for the procurement of machine screws, identified as commercial items under NSN 5305014392909. The requirement consists of two line items totaling 531 units, with 126 units destined for DLA Distribution Barstow and 405 units for DLA Distribution Albany. The hardware must be manufactured according to the current revision of ASME B18.6.7M-99, specifically part number B1867BA050130 with metric thread class 6G. Delivery is required within 151 days, with an original required delivery date of July 29, 2026, and a need ship date of August 23, 2026. Terms are FOB Origin, and both inspection and acceptance will occur at the origin. Quality and technical compliance are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific cybersecurity requirements for safeguarding covered defense information. A price evaluation preference is available for certified HUBZone small business concerns, and all quotes must be submitted via the DLA Internet Bid Board System.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS