This Solicitation opportunity from Texas was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Seebeck & Resistivity Measurement Device

Closed

TAMU-28-EQUI-ITB-1725State & Local

Submission Closed09/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

NDSU - Dynamic Mechanical Analyzer

Solicitation # SRC000482

North Dakota State University (NDSU) is soliciting bids under solicitation SRC000482 for a Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support dynamic mechanical analysis in bending, tension, and compression modes, featuring a frequency range of 2 x 10-8 Hz to 200 Hz, a temperature range of -170 C to +600 C, and a normal force sensor range of 0.001 N to 50 N. Optional rotational or torsional torque capabilities may be offered separately and will not be included in the base bid evaluation. The equipment is to be delivered FOB Destination to R1A Laboratories in Fargo, North Dakota, where final acceptance will be contingent upon successful installation, functional demonstration, and the completion of required training. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses through the NDBuys portal by November 4, 2026, including a completed Cost Proposal Form and a Technical Compliance Form. The base bid must be comprehensive, covering all hardware, software, delivery, installation, and warranty costs. All communications must be directed exclusively to the Procurement Officer, Casie Ewalt. Awardees must comply with North Dakota open records laws and non-discrimination policies, and they must certify that they are not proposed for federal debarment or suspension.

POSTED

DEADLINE

TUBING, LYSE, ANALYZER, H

Solicitation # SPE2DH-27-T-0288

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Microbiology Analyzers and Incubators Supply

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Baxter/Hill-Rom Helux Pro Surgical Light System

Solicitation # 75N98027Q00038PCA-NIA-11810

National Institutes Of Health Olao

POSTED

DEADLINE

Turbo Pump and Controller Services

Solicitation # N0017327Q1301424027

Naval Research Laboratory

POSTED

DEADLINE

Carl Zeiss Microscopy, LLC, SmartZoom 5, and options

Solicitation # RFQSSPR511693

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

High-Precision Wavemeter

Solicitation # FA860127Q0020

POSTED

DEADLINE

6632--FY27 Microbial Incubation ID and Susceptibility CPT

Solicitation # 36C24827Q0029

The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

FTIR Spectrometers with ATR

Solicitation # 405-27R0002880

The Texas Department of Public Safety is soliciting bids under solicitation number 405-27R0002880 for the procurement and installation of FTIR Spectrometers with ATR for its Crime Laboratory Division. The scope of work requires the delivery and professional installation of spectrometer systems, including AR coated diamond crystals, optical bases, and specific power cords, at two separate locations in Austin and El Paso, Texas. The contract is an Invitation for Bids (IFB) with a term of one year from the effective date, and awards will be based on the best value standard. Bidders must submit a three-volume response consisting of required contract forms, an information bid section with at least three similar project references, and a pricing response using a mandatory schedule. Compliance requires several state-mandated certifications, including disclosures regarding former state employees, foreign entity restrictions, and the Israel Boycott act. Additionally, any personnel with physical or logical access to the agency must pass a fingerprint-based criminal history background investigation and complete DIR-certified cybersecurity training. The contract is governed by DPS Standard Terms and Conditions, which specify that title and risk of loss only transfer to the agency upon actual receipt and acceptance of the deliverables.

Department of Public Safety

POSTED

DEADLINE

BACTERIOLOGICAL SPECIM

Solicitation # SPE2DS-27-T-0988

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Cross-Scale Imaging Platform / Fluorescent Microscope SupplyThis subcontract involves the manufacture and delivery of a high-performance cross-scale imaging platform and fluorescent microscopes for the University of Warwick Medical School. The equipment is intended for use by prime contractors supporting biological research projects and must adhere to the specific technical performance criteria outlined in the tender documentation. The scope of work includes the production and physical delivery of the imaging hardware to the University of Warwick. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.

University Of Warwick

POSTED

DEADLINE

Cross Scaling Imaging Platform

Solicitation # ocds-h6vhtk-079066

The University of Warwick Medical School is seeking a provider for a cross-scale imaging platform to support advanced biological research. This procurement, categorized under fluorescent microscopes, involves the delivery, installation, and commissioning of equipment that meets specific performance and technical specifications. The project is expected to run from January 4, 2027, to January 4, 2028, with performance taking place at the University of Warwick in Coventry, United Kingdom. This open procedure solicitation, identified as ocds-h6vhtk-079066, utilizes a weighted scoring system based on quality and cost criteria to determine the award. Interested parties must submit their tenders in English via the University of Warwick In-Tend supplier portal by the deadline of November 25, 2026, at 11:59pm. Kate Cogman serves as the primary point of contact for this requirement. Notably, the University of Warwick states that it is not a contracting authority under the Public Contracts Regulations 2015 or the Procurement Act 2023, and its use of public advertising platforms is voluntary.

University Of Warwick

POSTED

1 day ago

DEADLINE

in 29 days

AI Contract Overview

Texas A&M University is soliciting bids for the procurement of one LSR-1 Basic Unit Seebeck and Resistivity Measurement Device under solicitation number TAMU-28-EQUI-ITB-1725. The bid period opened on August 31, 2026, and closes on September 7, 2026, at 2:00 PM CDT. All responses must be submitted through the AggieBid online portal. While the agency is seeking the specified device, equivalents may be considered provided the vendor submits the manufacturer, model number, and a detailed specification sheet for evaluation. The contract will be awarded based on best value, considering low price, estimated delivery time, and the bidder's technical and operational capabilities, including financial stability and previous performance quality. Required terms include a minimum twelve-month warranty covering all parts and labor, payment terms of Net 30 upon acceptance, and delivery to College Station, Texas. Domestic shipments must be FOB Destination, Freight Prepaid and Allowed, while international shipments must be DDP. Vendors must certify compliance with Executive Order GA-48, ensuring they are not listed under Section 889 of the 2019 NDAA, Section 1260H of the 2021 NDAA, or the foreign adversaries list under 15 C.F.R. § 791.4. Additionally, vendors must disclose the country of origin and notify the university if any products are export controlled.