This Subcontract opportunity from New York was posted on February 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Semi-Annual and Annual Certification & Testing Services

Closed

State & Local

Submission Closed04/06/2026, 12:00:00 AM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Aerospace Component Inspection and SamplingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves specialized quality inspection and sampling for aerospace hardware. The selected contractor will perform these services at the point of origin for 11 units of fuselage fittings, utilizing MIL-STD-1916 or ASQ H1331 Table 1 zero-based sampling plans. To ensure compliance and precision, the contractor must maintain ISO 9001:2015 certification and utilize precision measurement tools, ultimately delivering detailed inspection reports and certifications of acceptance. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract opportunity is for a First Article Test Specialist to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The selected provider will perform testing and validation on the first production batch to ensure strict compliance with MIL-PRF-87260 and CID A-A-3174 standards. Utilizing specialized laboratory equipment, the specialist will verify critical density and compression properties, ultimately delivering a comprehensive First Article Test report and a certification of compliance. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties should note the solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The work falls under NAICS code 541380, focusing on testing and validation services to ensure military specifications are met prior to full-scale production.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Test (FAT) ValidationThe First Article Test (FAT) Validation subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the technical validation and testing of the first produced unit for prime contractors. The primary objective is to verify that the first article complies with the statement of work and all referenced drawings. The performance of these services will take place at Hill AFB. Eligible providers must be manufacturers or accredited testing laboratories maintaining a certified quality system, specifically ISO 9001 or AS9100. The successful contractor is responsible for delivering a formal First Article Test Report and final production approval. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Reporting for NSN 5340-01-551-8772

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Source Inspection and Quality Certification ServicesThis subcontract for Source Inspection and Quality Certification Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent source inspections and quality verifications, including facility inspections and sampling or acceptance testing conducted according to MIL-STD-1916 or ASQ H1331 standards. The primary objective is to ensure zero non-conformance through the use of calibrated precision measurement tools such as micrometers, calipers, and thread gauges. Qualified providers must hold a Certified Quality Inspector designation or an equivalent aerospace certification to deliver the required inspection reports and certifications of conformance. The performance of these services is centered in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Testing and Quality Validation for Sniper Data BoardsThis subcontract involves providing specialized testing and quality validation for Sniper Data Boards to support DLA Weapons Support Land Supplier Operations. The scope of work requires the performance of First Article Testing on five units and Product Verification Testing in accordance with Procurement Note E05. The contractor must ensure strict compliance with RQ001 quality requirements and coordinate directly with the DCMA QAR for necessary origin inspections. The primary deliverables for this engagement include comprehensive FAT and PVT test reports along with the delivery of certified compliant units. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Interested parties must respond by November 23, 2026, to support these Department of Defense requirements.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing and Validation for Critical Safety FastenersThis subcontract involves performing First Article Testing and validation for critical safety fasteners on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the manufacturing of Air Force Critical Safety Items by executing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. All work must be conducted using certified metrology and inspection equipment to ensure strict compliance with safety specifications. The selected provider is responsible for coordinating the delivery of units to Hill AFB for final government approval. The final deliverables for this engagement include one fully tested unit and a formal FAT approval and certification report. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for Third-Party Quality Conformance Inspection supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality assurance and origin inspections for prime contractors, ensuring strict adherence to RQ006 conformance inspections. These tasks must be executed using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. Key technical requirements include the validation of MTE calibration per RT001 and the issuance of Certificates of Conformance as mandated by FAR 52.246-15. The contractor must maintain JCP certification to access necessary technical data and is responsible for delivering final inspection reports and CoCs. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors delivering DLA supply contracts to ensure manufactured housing assemblies adhere to strict government specifications. The scope of work involves verifying material integrity, tolerances, and dimensions through the use of testing rigs and precision measurement tools. The primary objective is to provide a formal FAT report and certification confirming that the items meet the requirements for NSN 1560010827229. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is to be performed at Tinker AFB. The opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Inspection ServicesThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div, requires First Article Testing and Inspection Services for a specific aerospace component, NSN 1560-00-839-4727. The selected contractor must utilize laboratory equipment to validate specifications for one unit and generate detailed inspection reports for the 402 MXSG/MXRILM lab. All deliverables, including the tested unit and final reports, are to be delivered to Robins AFB. The project must be completed within 120 calendar days. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense aerospace project.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Critical Application Hardware Validation & InspectionThe Critical Application Hardware Validation and Inspection subcontract involves providing independent quality assurance and measurement services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary scope of work focuses on executing zero-based sampling plans to ensure 100 percent inspection of critical application bolts. This process requires the use of high-precision metrology equipment, including optical comparators and CMM, to certify that all hardware complies with the technical data package and adheres to MIL-STD-1916 or ASQ H1331 standards. The selected provider is responsible for delivering comprehensive inspection reports and formal certification documents. Performance for this contract takes place at Robins Air Force Base, Ohio. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

The MTA Headquarters in New York is seeking a subcontractor to provide specialized semi-annual and annual certification and testing services for INERGEN systems. The scope of work involves conducting in-depth testing, calibration, and certification processes, specifically focusing on pressure testing, alarm verification, and the delivery of detailed compliance reporting to ensure system integrity. This opportunity is categorized under NAICS code 541380 and was posted on February 25, 2026. Interested parties must submit their responses by the deadline of April 6, 2026. Further procurement details and submission guidelines can be accessed through the official MTA doing business portal.

General Info

MTA seeks subcontractor for INERGEN system certification and testing; responses due April 6, 2026.

Agency

New York → MTA Headquarters

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 0000532050.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Inspection, Maintenance, & Repair of INERGEN Fire Suppression Systems at NYCT Locations (0000532050)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 25

subcontract

Response DeadlineApr 6

Deadline has passed

Submission Closed

04/06/2026, 12:00:00 AM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → MTA Headquarters

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew York → MTA Headquarters

Office AddressN/A

ContactsNo contact information available

Full Description

Conduct in-depth semi-annual and annual testing, calibration, and certification of INERGEN systems including pressure testing, alarm verification, and compliance reporting.