Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SENSOR, CURRENT

Active
SPE7M1-26-T-209TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a current sensor identified by NSN 6625-01-500-5713, with a single unit required under Purchase Request 7017470731. Delivery is mandated within 20 days after contract award, and the solicitation opened on July 14, 2026, with responses due by July 27, 2026. The contract incorporates multiple DLA technical and quality requirements identified by R and I numbers, including packaging standards, cybersecurity compliance under CMMC Level 2 self-assessment, and the protection of covered defense information. The sensor may contain batteries, and all items must comply with strict prohibitions against intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or approved chemical reagents as authorized by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The supplier must provide a complete data package for both the primary and any alternate part, and removed government identification from non-accepted supplies must be handled according to specified procedures. Performance is designated to FPO, ZIP 96678, and the contracting activity falls under the Department of Defense’s Maritime Supply Chain, with Michael Reese listed as the primary point of contact.

General Info

Procure one NSN 6625-01-500-5713 current sensor, deliver in 20 days, comply with CMMC Level 2, mercury restrictions, and NAVSEA standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

UNIT 100496 BOX 1, FPO, AP, 96678, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M1-26-T-209T

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SENSOR,CURRENT
SENSOR,CURRENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ035: ITEM MAY CONTAIN BATTERIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
----
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6625-01-500-5713 Quantity: 1 EA Purchase Request: 7017470731QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThe contract is for the procurement of one circuit card assembly with part number 672-1391-00 and NSN 5998-01-421-2263, issued under solicitation SPE7M1-26-T-212V by the Department of Defense through the Maritime Supply Chain. Delivery is required within 428 days from the contract issuance, with shipment FOB origin and no tolerance for quantity variance. All items must be uniquely identified per IUID requirements under MIL-STD-130 and marked in compliance with MIL-STD-129, with no special markings except where ESD sensitivity dictates. The assembly is classified as electrostatic discharge sensitive and must be packaged using qualified materials per MIL-PRF-81705, Type I, with preservation method GX, as specified in MIL-STD-2073-1E; commercial packaging is strictly prohibited. The contractor must maintain an ANSI/ESD S20.20 compliant ESD control program, utilize approved ESD workstations per MIL-HDBK-773, supply authorized barrier bags, and ensure all personnel are trained in ESD handling procedures. No deviations or waivers to these requirements are permitted. Delivery must be made to DLA Distribution Jacksonville at the specified shipping address with the ultimate recipient being the DoD end user. The required delivery date is May 16, 2028, and inspection and acceptance occur at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThe contract is for the supply of one circuit card assembly identified by NSN 5998016889079 and part number LH1390C-SC-R2, with a required delivery within 20 days under FOB origin terms and no tolerance for quantity variation. The item must be packaged in strict compliance with MIL-STD-2073-1E, using preservation method GX for electrostatic discharge sensitive devices or method 41 for non-sensitive units, with commercial packaging strictly prohibited. All packaging must adhere to MIL-STD-129 marking standards and DLA’s RP001 palletization requirements, with special marking code ZZ indicating ESD sensitivity and code 39 required if classified as ESD sensitive. The contractor must maintain an ANSI/ESD S20.20 compliant control program, use approved ESD workstations per MIL-HDBK-773, employ MIL-PRF-81705 Type I barrier bags for ESD items, and ensure all personnel are trained in proper ESD handling. Mercury and mercury compounds are prohibited in any phase of preservation, packaging, or marking. Two distinct delivery addresses are specified: one to the Combat Systems Engineering Site in Moorestown, New Jersey, and another to USS PORTER DDG 78 via FPO address, each with unique shipping instructions requiring traceable freight and explicitly prohibiting parcel post. Required delivery dates are July 16, 2026, and July 13, 2026, respectively, with no waivers permitted to the technical or procedural requirements outlined.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
Manufacture of Circuit Card Assembly (CCA)The contract requires the full manufacturing, testing, and delivery of a single circuit card assembly with part number LH1390C-SC-R2 and NSN 5998016889079, encompassing all aspects of component sourcing, assembly, and quality verification. The work must strictly adhere to military standards for electrostatic discharge protection and preservation procedures to ensure operational readiness and environmental durability under demanding conditions. The product is intended for use within the Department of Defense supply chain and must comply with all technical and regulatory requirements associated with military-grade electronics manufacturing. This is a subcontract opportunity under the NAICS code 334412 for printed circuit board assembly and related manufacturing activities. The solicitation was posted on July 15, 2026, with responses due by July 27, 2026. Performance is designated to occur in New Jersey, specifically at the zip code 08057, and the opportunity is administered by the Maritime Supply Chain organization under the Department of Defense. All work must be completed in accordance with applicable defense procurement standards and delivered to the specified location within the established timeline.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
PANEL, MONITORThe contract pertains to the procurement of a PANEL, MONITOR with NSN 6625-01-381-0395 and part number 2227-701-077, under solicitation SPE7M0-26-T-010H, for a single unit delivered within five days FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major and acceptance requiring zero non-conformances unless otherwise stipulated. The item may contain batteries and must not include intentionally added mercury or mercury compounds except in functional applications such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Delivery is directed to USS WARRIOR MCM 10 at FPO AP 96683 via vessel shipment, with transportation governed by DLAD Proc Notes C19 and C20. The contract is a total small business set-aside under NAICS code 334412, with no quantity variance permitted and inspection and acceptance occurring at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details