Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SENSOR, CURRENT

Active
SPE7M1-26-T-246XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a current sensor with NSN/Part Number 6625-01-656-5195, for a single unit under purchase request 7017708132, with a required delivery within 20 days of award. The solicitation, identified as SPE7M1-26-T-246X, was posted on August 3, 2026, with responses due by August 14, 2026, and falls under NAICS code 334514 for other measuring and controlling device manufacturing. It is managed by the Maritime Supply Chain under the Department of Defense, with performance occurring at FPO, ZIP 96693, and primary point of contact being Michael Reese. The item may contain batteries and is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals within the United States. Technical data associated with the sensor is restricted to DLA contractors who hold approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have been formally approved by DLA to access controlled data, with DFARS 252.225-7048 governing compliance. DLA packaging and quality requirements referenced through R numbers are incorporated by full text from the DLA Master List, and the applicable revision is determined by the solicitation issue date for simplified acquisitions. Government identification must be removed from any non-accepted supplies, and the contractor must ensure compliance with all technical, quality, and security provisions outlined.

General Info

Procure one current sensor NSN 6625-01-656-5195, delivery in 20 days, ITAR/EAR controlled, DLA compliance required.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

UNIT 100381 BOX 1, FPO, AP, 96693, US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-246X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SENSOR,CURRENT
SENSOR,CURRENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ035: ITEM MAY CONTAIN BATTERIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6625-01-656-5195 Quantity: 1 EA Purchase Request: 7017708132QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334514
New
Federal
GASKET,LIQUID LEVEL
Solicitation # N0010426QFG36
This contract pertains to the procurement of a GASKET, LIQUID LEVEL designated as SPECIAL EMPHASIS material (Level I), critical to the safe operation of a Seal Delivery Vehicle (SDV) and potentially impacting shipboard system integrity, personnel safety, or vessel survival. The item must strictly comply with NAVSEA drawing 8600323-001 and MIL-STD-130 for marking, while adhering to NAVSEA S9086-AD-SOC-030 for toxicity and flammability standards regarding its non-metallic components. Mercury and mercury-containing compounds are strictly prohibited. The contractor is required to maintain total configuration control, submit Engineering Change Proposals (ECPs) for any Class I or II changes affecting form, fit, function, or interface, and adhere to stringent waiver and deviation protocols that require prior government approval and submission via ECDS. All nonconformances must be documented and classified as Critical, Major, or Minor, with supporting Objective Quality Evidence submitted through WAWF. The contract mandates compliance with the Buy American Act and related certifications, prohibits Government Source Inspection (GSI), and extends the prompt payment period from seven to 45 days after delivery. It enforces the mandatory use of Wide Area Workflow (WAWF) and ECDS for all submissions, including waivers, deviations, and quality documentation, requiring PKI-certified CAC access for system registration. Packaging must follow MIL-STD-2073, and all documentation must be issued via electronic means such as email or fax to constitute formal agreement. The material is classified as a Critical Safety Item, triggering rigorous traceability, recordkeeping, and verification requirements for all manufacturing processes, especially those defined as Critical Processes. Final delivery is due within 200 days, and the warranty period extends one year or 365 days after the last delivery. The solicitation is a total small business set-aside, with subcontracting plans and security prohibitions applicable, and all supplied documents carry distribution statements limiting access to authorized U.S. government entities and contractors.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 24 days
View Details
NAICS: 334514
New
DIBBS
Digital Display Indicator (COTS) SupplyThe contract involves the supply of 133 commercial off-the-shelf digital display indicators with the National Stock Number 6625-01-295-6411, with an option to procure an additional 336 units if needed. All units must meet military compliance standards, including specialized packaging and labeling requirements to ensure readiness for defense applications. Delivery is to be made to Tinker Air Force Base, Oklahoma, with the specified address of 73145-8000. The solicitation is classified as a subcontract under the NAICS code 334514, indicating manufacturing of other measuring and controlling devices. The opportunity was posted on August 2, 2026, and responses are due by August 13, 2026. The contracting entity is the Maritime Supply Chain under the Department of Defense, and all procurement activities are coordinated through the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334514
New
DIBBS
Specialized Manufacturer of Mercury-Containing Fluid Flow MetersThe contract calls for the specialized manufacture and supply of a shockproof, mercury-containing differential fluid flow meter identified by NSN 6680010787379, designed to meet rigorous military standards for integration into naval systems. The device must incorporate secondary containment to ensure safe handling and environmental compliance given the hazardous nature of mercury, and it must be engineered to withstand extreme operational conditions typical of defense and maritime environments. The product is intended for use in critical fluid monitoring applications where precision and durability are paramount. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, has a response deadline of August 10, 2026, and is classified under NAICS code 334514 for instrumentation manufacturing. Performance of the work is required at FPO with a zip code of 34093, indicating delivery to a military postal facility, likely for overseas or expeditionary deployment. The solicitation was posted on August 2, 2026, and all proposals must be submitted through the DIBBS platform by the stated deadline. Suppliers must demonstrate proven capability in producing mercury-containing instrumentation to exacting military specifications and possess appropriate handling, packaging, and logistics protocols for hazardous materials.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
Manufacturing of Symbol Indicator (Electronics Assembly)The contract is for the full production of a symbol indicator electronics assembly according to engineering drawing 9A341 Revision H, encompassing all phases from component sourcing and assembly to testing and configuration control. It is a subcontract issued under the NAICS code 334514, classified under the Department of Defense's ASC SUPPLIER OPER OEM DIVISION, with performance required at Hill AFB, Utah, zip code 84056-5734. The solicitation was posted on August 2, 2026, and proposals must be submitted by August 10, 2026, with no set-aside designation applied. All work must comply strictly with the specified technical documentation and quality standards to ensure full operational and regulatory compliance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
AMMETER
Solicitation # SPE7M0-26-T-026A
The solicitation SPE7M0-26-T-026A is for the procurement of a single ammeter with NSN 6625-01-670-8522, priced at $1.00 per unit, with a delivery requirement of five days after award to Fort Sill, Oklahoma. The item is classified as a non-hazardous supply but may contain batteries, and it must comply with DLA’s packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, with no special markings required. Preservation involves cleaning and drying with no protective coatings, and the unit is to be packed in a corrugated box with an intermediate fiberboard container, delivered FOB origin with zero quantity variance allowed. Inspection and acceptance occur at the destination, with the Government retaining authority over acceptance criteria under FAR 52.246-2. Packaging and palletization must conform to DLA’s RP001 requirements, and shipping must be traceable via non-parcel post methods. The contract includes mandatory clauses covering small business representation, equal opportunity, combating human trafficking, employment eligibility, safeguarding covered defense information, cyber incident reporting, and prohibitions on covered telecommunications equipment. Offerors must provide a UEI and CAGE code, affirm their small business status, and disclose any involvement with restricted telecommunications equipment or services under DFARS clauses. Technical and quality requirements are referenced from the DLA Master List, and compliance is enforced through the contract’s evaluation and delivery conditions. Payment is to be processed exclusively through WAWF, and the contract type remains unspecified pending award. The solicitation is open for response until August 13, 2026, with submissions required via the DIBBS portal, and the contracting officer is Gerard Quinn. No evaluation factors or weighting criteria are defined, suggesting potential award on a lowest price technically acceptable basis.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, DIGITAL DISP
Solicitation # SPE7M1-26-T-244T
The contract pertains to the procurement of 133 units of a digital display indicator identified by NSN 6625-01-295-6411, categorized as a commercial off-the-shelf (COTS) item, with an additional purchase request quantity of 336 units under request number 7017438764. Delivery is required within 153 days after delivery order issuance. The procurement falls under solicitation SPE7M1-26-T-244T, issued by the Department of Defense’s Maritime Supply Chain, with performance location at Tinker AFB, Oklahoma, 73145-8000. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by primary point of contact Michael Reese. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, including RD004 for CMMC Level 2 Self-Assessment, RD002 for Covered Defense Information, RP001 for DLA packaging standards, and RQ035 indicating potential battery content. The offeror must provide a complete data package for both the approved and alternate part, and any non-accepted supplies must have government identification removed per RQ011. The solicitation is subject to the DLA Master List revision in effect on the solicitation issue date.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, SYMBOL INDIC
Solicitation # SPE4A5-26-T-318L
This contract, issued under solicitation SPE4A5-26-T-318L by the Department of Defense’s ASC Supplier Oper OEM Division, specifies the procurement of 18 units of an indicator symbol component identified by NSN 6695-00-332-2709 and part number 9A-34-1, with a unit price of $18.00 and a total contract value of $324.00. The item must be delivered within 273 days to Hill Air Force Base, Utah, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes required. The supplier is expected to adhere to DLA’s packaging and transport directives, including palletization standards, and shipments must be addressed to the specified depot using the assigned parcel post code and contact information. The delivery deadline is May 11, 2027, with the solicitation closed on August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with applicable revisions determined by acquisition size and amendment dates. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, assigning verification levels or AQLs of VII, IV, and II for critical, major, and minor attributes respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampling unless contract terms dictate otherwise. Configuration changes require formal proposals or variance requests, and government identification must be removed from non-accepted supplies. Approved sources include Applied Magnetics Inc. and Aircraft Instruments Co. with CAGE 09959 and part number 3750008. The item is designated as a critical application component, and source approval documentation must be submitted under RC001 requirements. All procedures must align with DLA standards for procurement, transportation, and quality assurance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
METER, FLUID FLOW INDIC
Solicitation # SPE4A6-26-T-11HP
The contract pertains to the procurement of a differential fluid flow indicating meter, identified by NSN 6680-01-078-7379 and part number 19YNXXX0279A4CXAXX05, with a single unit required under purchase request 7017523070. Delivery is to be made FOB destination within 20 days of contract award, with zero variance permitted in quantity and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Palletization must follow DLA packaging guidelines, and all items must be properly marked and labeled. The shipment must utilize the fastest traceable transportation method, excluding parcel post, and be delivered to the USS Tennessee SSBN 734, FPO AA 34093. Mercury and mercury-containing compounds are strictly prohibited except for specific functional applications such as batteries, fluorescent lamps in portable instruments, sensors, or controls, with the additional requirement that any such instruments include a secondary containment boundary per NAVSEA 5100-003D. The item is not classified as hazardous, and no Safety Data Sheet is required. The contract includes references to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances mandated unless otherwise stated. Cybersecurity requirements under CMMC Level 2 do not apply, and the contractor is subject to Covered Defense Information protocols. The supplier must comply with all DLA technical, quality, and packaging directives, with the primary point of contact being Katisha Carter of the ASC Commodity Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
Manufacture of Fault-Locating Indicator (MIL-PRF-83287/01-16)The contract specifies the full manufacturing of 18 units of a fault-locating indicator meeting the stringent requirements of MIL-PRF-83287G Revision G and the associated QPL/QML standards, ensuring compliance with Department of Defense military performance specifications. The scope encompasses end-to-end production including all necessary testing, packaging, and delivery under FOB origin terms, placing responsibility on the contractor for meeting quality and readiness benchmarks prior to shipment. All units must satisfy rigorous defense-grade reliability and functional criteria to be accepted under the established qualification listings. The solicitation, issued under the NAICS code 334514 for other electronic component manufacturing, is classified as a subcontract with a response deadline of August 5, 2026, and was posted on July 31, 2026. Performance is required to be fulfilled at the designated location in Jacksonville, Florida, with the contracting entity operating under the Maritime Supply Chain division of the Department of Defense. While no set-aside status or point of contact details are provided, the contract demands full adherence to federal defense procurement protocols and delivery standards applicable to critical military electronic components.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 334514
New
DIBBS
Precision Manufacturing of Measuring InstrumentsThe contract calls for the precision manufacture of defense-grade measuring and navigational instruments compliant with military specifications and identified by NSN 6625-01-523-3022. This is a subcontract opportunity under the Department of Defense, specifically managed by the Maritime Supply Chain, and is classified under NAICS code 334514 for navigation, measuring, electromedical, and control instruments manufacturing. Production must meet exacting defense standards to ensure reliability and performance in critical military operations. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the physical location where the work must be executed and delivered. Bidders must submit their proposals by the response deadline of August 15, 2026, with the solicitation posted on July 31, 2026, providing a fourteen-day window for submissions. No set-aside designation is specified, meaning the opportunity is open to all qualified entities without preference for small business, veteran-owned, or other categories. The contract is issued through the DIBBS system under solicitation number SPE7M126Q1322, and interested parties should access the official link to review full requirements, submission protocols, and technical documentation. Compliance with all federal defense procurement regulations and quality assurance protocols will be strictly enforced.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
VOLTMETER
Solicitation # SPE7M1-26-Q-1322
The contract pertains to the procurement of 127 units of a voltmeter with NSN/Part Number 6625-01-523-3022 under solicitation SPE7M1-26-Q-1322, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 155 days after contract award, and responses must be submitted by August 15, 2026. The item is subject to export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this technical data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA. The place of performance is New Cumberland, Pennsylvania, with Misty Slone as the primary point of contact, and the NAICS code is 334514 for measuring and navigating instrument manufacturing.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, FAULT LOC
Solicitation # SPE7M1-26-T-145G
This contract pertains to the procurement of an Indicator, Fault Locating item identified by NSN 6625-01-104-4137, with a quantity of 18 units at a unit price of $18.00, totaling $324.00. The item is classified as a critical application under MIL-PRF-83287G Revision G dated 05/23/2018 and MIL-PRF-83287/1D Revision D dated 01/23/2019, with part number M83287/01-16. It is listed on the Qualified Products List or Qualified Manufacturers List, meaning only manufacturers on the approved list at the time of award are eligible. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 labeling, and prohibits the use of any Class I ozone-depleting substances in manufacturing or testing without explicit written approval from the contracting officer. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs based on their criticality. The item may contain batteries, requiring additional handling precautions. Delivery is FOB origin, with inspection and acceptance occurring at destination, and must be completed within 17 days from the award date. Packaging must conform to Fed-Std-313, with hazardous material packed per IP025 and non-hazardous material per ASTM D3951, though DLA technical and quality requirements override ASTM. All packaging and palletization must follow RP001 guidelines. The delivery address is DLA Distribution Jacksonville, and the contract specifies the original required delivery date as October 22, 2026, with a needed ship date of July 14, 2026. The item is subject to configuration change management and variance requests under RQ002, and government identification must be removed from non-accepted supplies per RQ011.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335312
New
DIBBS
ENCODER, SHAFT ANGLE
Solicitation # SPE7M1-26-T-246P
The contract pertains to the procurement of seven shaft angle encoders identified by NSN 5990-01-672-5924 and part number F181869-20 from LAKE SHORE SYSTEMS, INC. Delivery is required FOB origin within 264 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence and dictate final compliance standards. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value of $49.00 at $7.00 per unit. The required ship date and original delivery date are both May 6, 2027. The contract is governed under solicitation SPE7M1-26-T-246P, issued under the NAICS code 335312 by the Department of Defense's Maritime Supply Chain. Transportation and freight shipping instructions reference specific DLA procedural notes C19 and C20, and all documentation must align with the DLA’s authorized unit of issue standards. The point of contact for the solicitation is Joseph Madjecki, reachable via phone and email provided.
Motor and Generator Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-246T
The contract pertains to the procurement of three electromagnetic relays with NSN 5945-01-088-1822 under solicitation SPE7M1-26-T-246T, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on August 14, 2026. The item is subject to stringent export controls under either ITAR or EAR, prohibiting any transfer, including disclosure to foreign persons within or outside the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this technical data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on DOD export-controlled data handling, and approved questionnaire submissions are permitted access. The contracting entity must also maintain CMMC Level 2 certification through a certified third-party assessment organization and comply with all DLA packaging and cybersecurity requirements. Point of contact for inquiries is Corin Loper, and the solicitation is available via the DIBBS portal.
Relay and Industrial Control Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M1-26-Q-1324
The contract pertains to the procurement of an Axle, Shouldered, identified by NSN 3040-00-479-3932 and part number 416540-1, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). It requires strict adherence to serialization and traceability protocols, with each part and its packaging must be marked with the part number, serial number, contractor CAGE code, and actual manufacturer CAGE code, in compliance with MIL-STD-129. Re-branding that obscures original OEM markings is prohibited, and all serialized or lot-numbered components, including scrapped material, must be fully accounted for. Source approval is mandatory and must be granted by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit evidence of approval or meet criteria outlined in the NAVICP Source Approval Information Brochure. Only specifically approved manufacturers are eligible, including AERO COMPONENTS, LLC, RELIABLE MANUFACTURING COMPANY, and others listed. The contract enforces rigorous quality and documentation controls under SAE AS9100 standards, requiring Non-Destructive Testing (NDT) accreditation, Quality Conformance Inspection, and Inspection and Acceptance at Origin. The Certificate of Quality Compliance and other CDRLs such as the First Article Testing Report and Production Test and Inspection Report are mandatory, and technical data must align with the referenced TDP rev A drawings and quality assurance provisions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and all attributes are assigned specific verification levels or AQLs. The item must be free from intentional mercury compounds and Class I ozone-depleting chemicals, with exceptions strictly defined. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), and markings must include the contract number, NAWC CAGE code, and part number unless drawings specify otherwise. Delivery is scheduled for 378 days after delivery order, with FOB Origin, and the government has explicitly stated that surplus items are not acceptable. Unique Identification is not required per customer request, though traceability through serialization remains critical.

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M1-26-T-246U
The contract specifies the procurement of a starter motor with part number CR306B004ZABB and NSN 6110012999272, requiring one unit to be delivered within 20 days FOB destination. Strict prohibitions are in place against the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements while maintaining all product performance standards; alternative chemicals require prior approval unless explicitly authorized. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application item and must be shipped by the fastest traceable means—parcel post is prohibited—with delivery directed to the USNS COMFORT at FPO AE 09566. The solicitation is issued under contract number SPE7M1-26-T-246U, with a required delivery date of July 29, 2026, and incorporates technical and quality requirements from the DLA Master List, governing revisions based on the acquisition type and timeline. The unit of issue is EA, and the contract is managed by the Department of Defense under the Maritime Supply Chain organization.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7M1-26-T-246K
The contract pertains to the procurement of one gate valve identified by NSN 4820014831523 and part number 1305-016-200 from Milwaukee Valve Co. Inc., with a required delivery within five days of the contract date and FOB destination terms. The item must comply with all DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging, cushioning, containment, and marking standards compliant with MIL-STD-129, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery destination is the SRF-JRMC Yokosuka Naval Base in Japan, with a required delivery date of July 31, 2026, and zero variance allowed in quantity. All shipments must adhere to DLA transportation procedures C19 and C20, and the unit of issue is EA as defined by the DoD authorized standard. The solicitation number is SPE7M1-26-T-246K, which incorporates technical and quality requirements from the DLA Master List, and the contract is subject to revision controls based on the acquisition size and amendment dates.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE7M1-26-T-246M
The contract pertains to the procurement of a control panel, specifically identified by NSN 6110-01-673-4656 and part number 453-0033 from ACR ELECTRONICS, INC., with a total quantity of 34 units to be delivered within 183 days. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging guidelines under MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere to DLA’s procurement requirements, with specific handling instructions including dry preservation, E5 unit containers, and shockproof containment for any incidental mercury-containing components, as authorized only under narrow exceptions defined by NAVSEA. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and no intentional addition of mercury or its compounds is permitted unless explicitly exempted. Delivery is FOB origin with zero variance in quantity, inspection and acceptance occurring at the destination, with the shipment directed to DLA Distribution Depot Oklahoma at Tinker AFB. The purchase is part of a total small business set-aside under NAICS code 335314, with the original required delivery date of March 7, 2027, and a need ship date of February 14, 2027. Pricing is fixed at $34.00 per unit for a total contract value of $1,156.
Relay and Industrial Control Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-246W
The contract specifies the procurement of 2 fixed chip resistors with NSN 5905-01-611-0811 under solicitation SPE7M1-26-T-246W, requiring delivery within 80 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and unit packaging codes, with all marking adhering to MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on each individual unit pack. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and includes detailed parcel post and shipping instructions. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions. The resistors are supplied by Northrop Grumman Systems Corporation and State of the Art, Inc., under their respective part numbers, and the contract mandates compliance with DLA transport and freight procedures as noted in DLAD Proc Notes C19 and C20. The original delivery deadline is December 27, 2026, with a needed ship date of November 3, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M1-26-T-246L
The contract specifies the procurement of a variable wire wound resistor, nonprecision, identified by NSN 5905-00-764-0416 and part number M22/01-00211UB, with a required quantity of six units to be delivered within 16 days after issuance of the purchase request. The item must comply with MIL-PRF-22/1D and MIL-PRF-22E(Sup 1A) technical specifications and is designated as a critical application item, requiring adherence to strict quality and performance standards. The contractor must source components from qualified products or manufacturers lists as defined by applicable procurement notes, and all units must bear lead finish markings per IPC/JEDEC J-STD-609, clearly identifying lead content on each individual unit package. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with special code ZZ addressing additional requirements. The contract strictly prohibits the use of class I ozone-depleting substances in any phase of manufacturing or processing unless written approval is obtained from the contracting officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its contact surfaces, with limited exceptions for functional uses in defined applications such as specific batteries, lighting, sensors, or chemical reagents approved by NAVSEA. Portable mercury-containing devices must be shockproof with secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring upon arrival. The unit price is $6.00 per unit, total value is $36.00, and the contract includes no quantity variance. The solicitation was issued under contract number SPE7M1-26-T-246L, with a response deadline of August 14, 2026, and an original required delivery date of April 12, 2026. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331420
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M1-26-T-246V
This contract is for the procurement of 1,500 feet of electrical power cable identified by NSN 6145014748444, with the specific part number M27500B16WR4U00, manufactured to meet NEMA WC 27500-2025 Revision NR dated 01/01/2025. The cable must be supplied in continuous length as dictated by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering to all higher-priority requirements listed in the DLA Master List of Technical and Quality Requirements. Packaging must be palletized according to RP001, with a unit of issue of 500 feet per pack, and the total quantity is subject to a plus or minus 5% variance. Delivery is required FOB origin within 210 days, with inspection and acceptance occurring at the destination, and the specified delivery point is DLA Distribution Warner Robins, Robins AFB, Georgia. The cable is sourced from a qualified products list, and full and open competition applies, with no exceptions permitted under the specified technical standard. The solicitation number is SPE7M1-26-T-246V, issued by the Department of Defense under the Maritime Supply Chain organization, with a response deadline of August 14, 2026, and a posted date of August 3, 2026. Performance is mandated at Robins AFB, GA, and the contract includes stringent configuration control through Engineering Change Proposal and variance request protocols. Any deviation from technical or quality specifications must be formally requested and approved. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue must align with the official DoD and ANSI X12 standards provided by the DLA. The point of contact for inquiries is Alisha Blanton, and all documentation referenced, including packaging, shipping, and technical compliance, must be strictly followed to ensure contract fulfillment.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-246N
The contract pertains to the procurement of a Filter Element, Flui with NSN 4330-01-544-3410 and part number SO-636CM furnished by Parker Hannifin Corp. A total quantity of 107 units is required at a unit price of $107.00, resulting in a total contract value of $11,449.00. Delivery is to be made FOB origin within 139 days from the original required delivery date of January 1, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as a critical application with no shelf life requirement. All packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling per MIL-STD-129 and palletization in accordance with RP001. The unit of issue is each (EA), and the packaging configuration must align precisely with the contract-specified QUP. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for freight shipping. Transportation instructions are governed by DLAD Proc Notes C19 and C20. This solicitation, identified as SPE7M1-26-T-246N, was issued on August 3, 2026, with a response deadline of August 14, 2026, and is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333998. The contracting office is part of the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese, reachable via email and phone provided in the contract. All terms and requirements are governed by DLA standards and referenced master lists accessible through the official DLA procurement portal.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7M1-26-T-246Y
The contract is for the procurement of 50 units of SEAL, PLAIN ENCASED, identified by NSN 5330-01-115-7246, under solicitation number SPE7M1-26-T-246Y, with a response deadline of August 14, 2026, and a delivery requirement of 97 days ADO. The item is classified as a commercial item and must be packaged in a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1 specifications, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The product must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision based on solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and covered defense information protocols are enforced. All items must comply with MIL-STD-130N for identification marking, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Maritime Supply Chain, with performance location in New Cumberland, PA, and primary point of contact Gerald Franklin.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details