Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Sensor or Switch Integration for Military Control Pendant

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the integration of embedded sensors or switching mechanisms into the PENDANT-ASSEMBLY to enable functional signal detection or control actuation, specifically tailored for military applications. This subcontract is issued under the NAICS code 334514, indicating focus on instrumentation manufacturing, and is administered by the Defense Logistics Agency within the Department of Defense. The work is intended to support operational requirements where precise control or real-time feedback is critical, though specific performance locations and point of contact details are not provided. The solicitation was posted on July 14, 2026, and the contract reference number is SPE4A726P1840, accessible via the DIBBS portal for further procurement details.

General Info

Integrate sensors into PENDANT-ASSEMBLY for military use under NAICS 334514, administered by DLA.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A726P1840.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PENDANT-ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provision of embedded sensors or switching mechanisms within the PENDANT-ASSEMBLY, assuming functional need for signal detection or control actuation.

Similar Contracts

Same NAICS industry code

RFI - Bus Passenger Counting Systems

Solicitation # WMATA-0000010974

The Washington Metropolitan Area Transit Authority is seeking information regarding Bus Passenger Counting Systems under solicitation number WMATA-0000010974. This sources-sought opportunity is categorized under NAICS code 334514 and is intended to identify capable providers for passenger counting technology. The request for information was posted on November 3, 2026, and requires responses to be submitted by the deadline of November 30, 2026. Interested parties can access further details and submission portals through the official WMATA supplier link.

Washington Metropolitan Area Transit Authority

POSTED

about 5 hours ago

DEADLINE

Supply of Ammeter (NSN 6625-01-727-7468)This subcontract involves the procurement of one ammeter, identified by NSN 6625-01-727-7468 and part number 01550, for the DLA Weapons Support Maritime Supply Chain. The equipment must be sourced specifically from either Simpson Electric Company, Inc. or Hughes Corp. The final product is to be delivered to Camp Lejeune, North Carolina. The contractor is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with palletization following DLA RP001 guidelines. Additionally, the contract mandates strict compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Current Sensor Supplier (NSN 6625016548435)This subcontract opportunity is for the supply of current sensors under NSN 6625016548435 to support the DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to technical specifications and DLA quality standards. Key logistical requirements include packaging items for Government-Arranged Transportation and delivering the physical sensors to a designated FDT pickup point. Managed by the Department of Defense under NAICS code 334514, this requirement is open for responses until November 16, 2026. Interested parties must possess a valid CAGE code to be eligible for the award. The contract focuses on ensuring a reliable supply of specific electronic components to maintain maritime supply chain readiness.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

Supply of Velocity Transducers (NSN 6680016488043)This subcontract involves the manufacture or sourcing of Velocity Transducers, identified by NSN 6680016488043, to support prime contractors on projects for the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The selected provider must ensure all transducers meet strict technical specifications, including the application of special marking code 05 for delicate instruments. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging is mandatory to ensure the safe delivery of these components. The contract falls under NAICS code 334514 and requires the provider to maintain NIST SP 800-171 compliance for cybersecurity standards. Performance of the contract is centered in Port Hueneme, California. Interested parties must have submitted responses by the deadline of November 12, 2026, to be considered for the supply of these specialized instruments.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

METER, FLOW RATE INDICA

Solicitation # SPE4A5-27-T-1135

Solicitation SPE4A5-27-T-1135, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotation for one flow rate indicating meter, identified by NSN 6680006846721 and Treadwell Corporation part number 29-00542. This critical application item must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is June 27, 2027, with a need ship date of April 6, 2027, and a delivery lead time of 165 days after order. The contract mandates strict technical and quality compliance, requiring the item to be oxygen clean per MIL-STD-1330D and prohibiting the use of mercury or mercury compounds in the hardware, preservation, or packaging. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination under FAR 52.246-2, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions, and hazardous material labeling.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1928

Solicitation SPE7M1-27-T-1928, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of one oscilloscope, specifically Fluke Corp part number 190-204/AM/S (NSN 6625-01-701-1928). The required delivery date is October 29, 2026, with a delivery lead time of 20 days. Shipping is FOB Origin, and the item is to be delivered to JBSA Lackland in Texas. Inspection and acceptance will take place at the destination, governed by FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Additionally, the contractor must comply with DFARS cybersecurity regulations regarding the safeguarding of covered defense information and prohibitions on certain telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-3253

Solicitation SPE7L1-27-T-3253 is issued by the DLA Weapons Support Land Supply Chain for the procurement of one hoisting link, identified by NSN 4910-01-611-0639 and JCB Inc. part number 347/23374. The requirement is categorized under NAICS code 334514. Delivery is required within 10 days after receipt of order, with an original required delivery date of October 30, 2026. The item is to be delivered FOB Origin to the 0068 CS BN CO A Composite MF Central Receiving Point at Fort Carson, Colorado. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA Master List requirements (RA001) and DLA packaging requirements (RP001) take precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program (DFARS 252.225-7001), safeguarding of covered defense information (DFARS 252.204-7012), and various hazardous material labeling standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

FIXTURE, AIRCRAFT MA

Solicitation # SPE4A1-26-T-2455

Solicitation SPE4A1-26-T-2455 is a fixed-price procurement issued by the DLA Aviation Supply Chain for six aircraft maintenance fixtures, identified by NSN 4920-01-563-1433. The requirement is unrestricted and not a small business set-aside, falling under NAICS code 334514. A critical detail of this procurement is that the government does not possess an approved technical data package, as the data is either proprietary or insufficient for competitive procurement. Delivery is required within 130 days after order, with shipping terms set as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and security compliance, including a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Offerors must ensure their inspection systems comply with SAE AS9003 or ISO 9001. Additionally, items produced via additive manufacturing are ineligible for award unless specifically authorized. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

AVIATION SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1911

Solicitation SPE7M1-27-T-1911 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one ammeter, identified by NSN 6625-01-727-7468 and part number 01550 from manufacturers such as Simpson Electric Company, Inc. or Hughes Corp. The requirement is classified under NAICS code 334514. Delivery is required within 10 days of award, with an original required delivery date of October 30, 2026. The terms are FOB Origin, with both inspection and acceptance occurring at the destination. Shipping is directed to the Distribution Management Office at Camp Lejeune, North Carolina, and must be sent via the fastest traceable means, specifically excluding parcel post. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, such as safeguarding covered defense information and prohibitions on certain telecommunications equipment. The solicitation also incorporates specific FAR sections for fixed-price changes and destination inspection.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7LX-27-U-0257

Solicitation SPE7LX-27-U-0257 is a total small business set-aside for a unilateral Indefinite Delivery Contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate. The contract is for the procurement of Deployment Kits, identified as Commercial Off-The-Shelf items under NSN 1005016299733 and part number AP100234 from Sanitz Enterprises, Inc. The estimated annual quantity is 11 kits with a maximum contract value of 350,000.00 dollars. Delivery is required within 62 days after order, with shipping terms specified as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality requirements, including the DLA Master List and specific prohibitions against the intentional addition of mercury or the use of Class I ozone-depleting substances. Packaging must comply with ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129 and the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, sustainable products, and the Buy American Act.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 11 hours ago

DEADLINE

TRANSDUCER, VELOCITY

Solicitation # SPE4A5-27-T-2213

Solicitation SPE4A5-27-T-2213, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of one velocity transducer, identified as NSN 6680016488043. This item is classified as a commercial off-the-shelf product with no shelf life requirement. The delivery is required within 20 days after receipt of the order, with an original required delivery date of August 13, 2026. Shipping is FOB Origin, with the final destination being the Naval Construction Group One in Port Hueneme, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specifically, the item must be marked with special marking code 05 for delicate instruments. Inspection and acceptance will occur at the destination, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. The procurement is governed by NAICS code 334514 and includes various FAR and DFARS clauses covering the Buy American Act, cybersecurity requirements via NIST SP 800-171, and the use of the Wide Area WorkFlow system for electronic invoicing. Item Unique Identification is not required for this order.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

SENSOR, CURRENT

Solicitation # SPE7M0-27-T-1004

Solicitation SPE7M0-27-T-1004, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of two current sensors, identified by NSN 6625016548435. The requirement is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The original required delivery date is November 2, 2026, with a delivery window of five days after receipt of order. Inspection and acceptance will take place at the destination, located in Aviano, Italy. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with packaging and marking governed by MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with RP001 requirements. Administrative processes, including invoicing and payment requests, must be handled electronically through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and specific DFARS clauses regarding covered defense telecommunications equipment. Quotations for this effort, which may be eligible for automated award, are due by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and labeling for prime contractors supporting Defense Logistics Agency Troop Support projects. The scope of work requires the processing of 20 units of identification markers destined for the USS Forrest Sherman DDG 98, ensuring all deliverables strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards using compliant materials and equipment. The project is categorized under NAICS code 561910 and is managed by the Department of Defense. Delivery is specified as FOB Destination with the place of performance located at FPO 09569. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Precision Fabrication of Identification Markers (NSN 7690-01-668-5478)This subcontract with the Defense Logistics Agency involves the precision fabrication of 20 identification markers under NSN 7690-01-668-5478 for prime contractors on DLA Troop Support projects. The manufacturer must strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 53711 5959312 Revision D, ensuring all units meet shelf-life specification RS011 for Type I Code H items. The project is subject to strict regulatory compliance, including the Buy American Act and the Berry Amendment, and explicitly prohibits the use of additive manufacturing. Performance will take place at FPO 09569, with the final deliverable consisting of 20 completed identification markers.

POSTED

about 11 hours ago

DEADLINE

Supply of Metso Valve Positioner (NSN 4820-01-572-1305)This subcontract involves the procurement of one Metso valve positioner, part number NE729S/S1 and NSN 4820-01-572-1305, to support prime contractors delivering to the Defense Logistics Agency for the USS Tripoli LHA 7. The supplier must ensure the equipment adheres to the DLA Master List of Technical and Quality Requirements and strictly follows MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 standards. The contract is categorized under NAICS code 423830 and is managed by the Department of Defense. Performance of the contract will take place at FPO 96694-2900. Interested parties must respond by November 16, 2026, to provide the single packaged and marked unit as specified.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Supply of Valve Regulated Sealed Lead-Acid Storage BatteriesThis subcontract involves the supply of eight valve regulated sealed lead-acid storage batteries, specifically part number RBC26 from Schneider Electric IT Corporation under NSN 6140-01-707-9900. These components are intended for prime contractors fulfilling Defense Logistics Agency supply contracts for the USS South Dakota, with final delivery to be made to Groton, Connecticut. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment. All shipments must comply with MIL-STD-129 and MIL-STD-2073-1E for packaging and marking, while hazardous materials communication must follow FED-STD-313E. The procurement falls under NAICS code 335910 and is managed through the Department of Defense.

Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Countersink Depth Gage SupplierThis subcontract involves the supply of one Countersink Depth Gage, identified by NSN 5220-00-195-5689, for prime contractors supporting the Defense Logistics Agency. The selected supplier must ensure all items are packaged according to ASTM D3951 and MIL-STD-129 standards and palletized following RP001 guidelines. Final delivery of the labeled equipment is required at the Fleet Readiness Center East located in Cherry Point, North Carolina. The contract mandates strict adherence to the Buy American Act and DFARS 252.204-7012 regulations. Operating under NAICS code 334517, the opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 11 hours ago

DEADLINE

Fluid Valve Stem Supply (NSN 4820011379773)This subcontract involves the supply of one fluid valve stem for the USS BATAAN LHD 5 under a Defense Logistics Agency contract. The provider is responsible for manufacturing or sourcing hardware that matches Emerson Automation Solutions part numbers [phone hidden] or NMP-1521. All items must be delivered FOB Destination and must adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The contract requires full compliance with the Buy American Act, the Berry Amendment, and DLA RA001 quality requirements. Identified by NSN 4820011379773 and NAICS code 332912, the opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. Performance is designated for FPO 09554.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Linear Directional Control Valves (NSN 4820-01-686-4616)This subcontract involves the manufacture or procurement of two linear directional control valves for the Defense Logistics Agency, specifically meeting the technical specifications of NSN 4820-01-686-4616 and DLA Master List requirements. The project demands precision machining and strict adherence to the Buy American Act. All items must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery FOB Destination to the USS Kansas City LCS 22. The contract is categorized under NAICS code 333998 and is managed through the Department of Defense. Interested parties must submit their responses by November 16, 2026. Performance of the contract will take place at FPO 96694.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016055069)This subcontract involves the manufacture or distribution of identification markers under NSN 7690016055069 for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the delivery of one unit of the identification marker, ensuring strict adherence to military specifications for packaging and marking. Specifically, the contractor must follow MIL-STD-2073-1E and RP001 for packaging, MIL-STD-129 for marking, and Special Marking Code 32 regarding shelf life. The contract is governed by DFARS 252.225-7001 Buy American standards and falls under NAICS code 332999. Performance of the contract is designated for Macon, Missouri. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Shipping and Freight (International/APO)This subcontract for the Defense Logistics Agency involves the specialized international transport of hazardous chemical kits, specifically those containing strontium chromate, for prime contractors. The scope of work requires hauling materials to Okinawa, Japan, and APO AP, ensuring that all kits are delivered with intact safety labeling. The contractor must maintain HazMat shipping certification and strictly adhere to international hazardous materials shipping regulations. Key compliance requirements include the management of all shipping documentation and adherence to MIL-STD-129 and MIL-STD-2073-1E standards.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Supply of MIL-PRF-23377K Epoxy Primer Coating KitsThis subcontract involves the manufacture or sourcing of epoxy primer coating kits for prime contractors supporting Defense Logistics Agency supply contracts. The required product is a green, strontium chromate-based corrosion inhibitor primer that must strictly adhere to MIL-PRF-23377K and QPL-23377-19 specifications. All items must be packaged according to MIL-STD-129 and MIL-STD-2073-1E standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Completed Part A and Part B kits are to be delivered FOB destination to Okinawa, Japan, and APO AP. The procurement falls under NAICS code 325510 and is managed through the Department of Defense.

Paint and Coating Manufacturing

POSTED

about 11 hours ago

DEADLINE

Safety Relief Valve Supplier (NSN 4820011900354)This subcontract involves the supply of a specialized safety relief valve, identified by NSN 4820011900354, for prime contractors supporting Defense Logistics Agency supply contracts for the USS Warrior MCM 10. The required component must feature a bronze body with silver brazed union ends and a corrosion-resistant steel spring calibrated for 8 to 10 PSIG. The use of additive manufacturing is strictly prohibited for this procurement. The supplier must ensure full compliance with MIL-STD-2073-1E, MIL-STD-129, and NAVSEA 5100-003D standards. The contract entails the delivery of one safety relief valve on a FOB Destination basis. Responses to this requirement are due by November 16, 2026, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

Defense Packaging and Logistics ProviderThe Defense Packaging and Logistics Provider subcontract involves providing specialized military packaging and shipping services for prime contractors under Defense Logistics Agency Troop Support contracts. The selected provider is responsible for packaging components according to ASTM D3951 and RP001 standards, while ensuring all markings and labels comply with MIL-STD-129. The scope of work requires the delivery of fully packaged and labeled shipments to Robins AFB via the fastest traceable transportation methods, specifically excluding parcel post. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense, with a response deadline set for November 16, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS