Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SENSOR, OXYGEN ANALY

Active
SPE2DS-26-T-309WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three oxygen sensor units, each designed for general-purpose measurement of oxygen concentration in non-flammable samples. The sensors are self-contained, highly stable, and engineered for long-term use with a standard 0 to 2.5 VDC output, while an isolated 4 to 20 mA output is available as an optional configuration. Operating temperature ranges from 0°F to 130°F, and power requirements span 7 to 28 VDC, typically drawing 250 mA at 12 V, with current draw inversely related to voltage levels. The unit of issue is each (EA), and the price per unit is either $742.00 or $982.00 depending on selected options. Critical options must be specified by the buyer including measurement range (0–25%, 0–50%, or 0–95%), analog output type, and fitting type (diffusion screen, compression, or barbed). The NSN is 6630-01-680-1727 with a purchase request number of 7017736341, a delivery requirement of 20 days ADO, and the solicitation number SPE2DS-26-T-309W issued under a federal procurement. Technical and quality requirements are governed by the DLA Master List, and packaging and removal of government identification follow specific DLA protocols. Contact for option selection and clarification is Derek Johnson at AMI, while primary contract point of contact is Olusola Emmanuel with the Department of Defense’s Medical Supply Chain.

General Info

Procure three oxygen sensors with optional outputs, specs, and fittings; $742–$982 each; 20-day delivery; DLA standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

2660 SOUTH EBER ROAD BLDG 155, SWANTON, OH, 43558, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-309W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SENSOR,OXYGEN ANALY
SENSOR,OXYGEN ANALY GENERAL PURPOSE SELF-CONTAINED OXYGEN SENSOR:
PERCENT OXYGEN IN NON-FLAMABLE SAMPLES; EXTREMELY STABLE, LONG-LIFE
SENSOR; STANDARD 0-2.5VDC OUTPUT: ISOLATED 4-20MA OUTPUT OPTIONAL.
OPERATING TEMPERATURE: 0 DEG F TO 130 DEG F. POWER REQUIREMENTS: BETWEEN
7 AND 28 VDC (NOMINALLY 24VDC) TYPICALLY 250 MA AT 12VWITH NO EXTERNAL
DRAW FROM THE 5V SUPPLY. CURRENT DRAW IS HIGHER AT LOWER VOLTAGE AND
LOWER AT HIGHER VOLTAGE.
. UNIT OF ISSUE EACH (EA).
NOTE TO BUYER
CUSTOMER WILL NEED TO BE CONTACTED IN ORDER TO SELECT
OPTIONS.
This model needs some options to be selected in order to provide a complete quote.
Please advise on the following required options:
1. Measurement Range: 0-25%, 0-50%, or 0-95%?
2. Analog output: 0-2.5VDC or 4-20mA?
3. Diffusion screen, compression fittings, or barbed fittings?
Price on probes are either $742.00 or $982.00
CONTACT INFO AMI INSIDE SALES Derek Johnsondjohnson@amio2.com(714) 848-5533
. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-680-1727 Quantity: 3 EA Purchase Request: 7017736341QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
DIBBS
VOLTMETER
Solicitation # SPE7M1-26-T-248M
The contract specifies the procurement of a single voltmeter with NSN 6625-00-539-8089 and part numbers 100011NLNL from Yokogawa Corporation of America or 4851-004 from Jewell Instruments LLC, under solicitation SPE7M1-26-T-248M. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any conflicting specifications, including prohibitions on the use of Class I ozone-depleting substances in manufacturing unless explicitly approved in writing by the Contracting Officer. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise directed, and verification levels or AQLs must be applied according to attribute criticality. Packaging must adhere to RP001 and MIL-STD-129, with hazardous materials handled per TQ requirement IP025 and non-hazardous items packaged per ASTM D3951, though DLA requirements take precedence. The unit of issue is each, with a fixed quantity of one and no variance allowed. Delivery is required FOB origin within 20 days of the contract award, with inspection and acceptance occurring at the destination. The item must be shipped via traceable means only, strictly prohibiting parcel post, and delivered to the specified military address at Holloman Air Force Base, New Mexico. The required delivery date is July 31, 2026, and the contract specifies a purchase request number and government tracking identifiers including DICS, FC, and TPN. The voltmeter may contain batteries, triggering additional handling and compliance obligations, and the supplier must ensure all markings, labeling, and palletization conform to DLA standards. The solicitation is open to federal suppliers under NAICS 334515, with primary point of contact provided, and response submission is due by August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334515
New
DIBBS
END CAP, VISCOMETER,
Solicitation # SPE2DH-26-T-5798
The contract is for a single End Cap, Viscometer, OTC, specifically designed for use at the Oil Test Centre, Version F, with the NSN 6630-01-498-9902. The requirement is for one unit to be delivered within 20 days of award under Solicitation SPE2DH-26-T-5798, which was posted on August 4, 2026, with responses due by August 11, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in commercial containers that protect against damage and ensure safe, cost-effective delivery. The item must be clearly marked according to MMS No. 1 guidelines, and any government identification on non-accepted supplies must be removed. Bidders are required to specify the source and part number being offered, and the performance location is designated as FPO, 96694. The contracting office is the Department of Defense, Medical Supply Chain FSH, with primary contact Tina Vu at tina.vu@dla.mil.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
MULTIMETER
Solicitation # SPE7M0-26-T-028H
The contract pertains to the procurement of one unit of a multimeter with NSN 6625-01-236-8371 and part number 3526A from Triplett (Bluffton) Corporation under solicitation SPE7M0-26-T-028H. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. The item may contain batteries and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which take precedence over commercial standards. Packaging must adhere to MIL-STD-129 for marking and labeling and RP001 for DLA-specific packaging requirements; if non-hazardous per Fed-Std-313, packaging must meet ASTM D3951 unless superseded by DLA requirements. Hazardous materials must follow TQ requirement IP025. The product must be shipped via traceable means, excluding parcel post, to Joint Base Anacostia-Bolling, DC, and marked with the designated government shipping and receiving information. Inspection and acceptance occur at the destination. The required delivery date is August 3, 2026, and the contract is governed by federal acquisition protocols with no set-aside designation. The point of contact for inquiries is Gerard Quinn of the Department of Defense, Maritime Supply Chain ESOc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334515
New
Federal
Potentiostat-Galvanostat Battery Cycler Supply
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
Federal
One (1) Oscilloscope
Solicitation # W911QX26QA141
The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking a single oscilloscope under solicitation number W911QX26QA141, posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 p.m. Eastern Time. This is a presolicitation notice with no set-aside designation, meaning all eligible vendors may respond, and the procurement falls under NAICS code 334515 for electromagnetic and other electronic testing equipment manufacturing. The instrument is to be delivered to Aberdeen Proving Ground, Maryland, 21005, with performance based at the designated military installation. Primary point of contact for inquiries is Morgan Evans, reachable at 520-672-9578 or morgan.j.evans6.civ@army.mil, with secondary support provided by Meghan Dumler at 520-672-9598 or meghan.d.dumler.civ@army.mil. Additional specifications and requirements are detailed in the accompanying Presolicitation Notice and Salient Characteristics, which bidders must consult to ensure compliance. The official solicitation page is accessible via the provided SAM.gov link, and all submissions must adhere to the stated timeline and technical parameters to be considered.
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
Federal
Phase Noise Analyzer
Solicitation # NB672000-26-02019
The National Institute of Standards and Technology (NIST) is conducting market research to identify qualified vendors capable of supplying a Phase Noise Analyzer that meets specified technical requirements, as outlined in an attached draft document. This sources sought announcement is not a solicitation, nor does it obligate the government to award a contract; it is solely intended to assess industry capabilities and determine whether a small business set-aside is feasible. NIST is seeking responses from all responsible sources, including small businesses, small disadvantaged businesses, women-owned small businesses, HUBZone firms, service-disabled veteran-owned small businesses, and veteran-owned small businesses, as well as large businesses. The procurement is classified under NAICS code 334515 with a small business size standard of 750 employees, and participation is open to firms nationwide. Responses must be submitted electronically and limited to five pages, including company profile details, unique entity identifier, CAGE code, manufacturer and country of origin information, product specification sheets, delivery and installation timelines, and verification of small business status. Sales brochures and marketing materials will not be accepted. NIST will use the information gathered to evaluate the market landscape and decide on the most appropriate acquisition method, which may include a competitive procurement posted on sam.gov. If at least two qualified small businesses are identified, the requirement will be set aside exclusively for small businesses. The government will not compensate respondents for information provided in response to this announcement. All submissions must be received by July 26, 2026, and should be directed to the designated point of contact, Clifford Nicholson, via email or phone. The place of performance and final contract award details remain undetermined pending the outcome of this market research phase. Responses should focus on demonstrating technical compliance with the specified requirements and providing clear, verifiable evidence of capability and readiness to fulfill the need upon award.
Department Of Commerce Nist

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334515
New
Federal
Intent to Solicit only one source for one (1) Potentiostat-Galvanostat Battery Cycler.
Solicitation # W911QX26QA174
The U.S. Army is seeking to solicit only one source for the procurement of a single Potentiostat-Galvanostat Battery Cycler under contract number W911QX26QA174, with no set-aside provisions applied. The requirement is tied to NAICS code 334515, indicating it falls under the manufacturing of instruments and related products for measurement and testing, specifically laboratory equipment. The solicitation was posted on August 4, 2026, and responses are due by August 10, 2026, at 3:59 p.m. Eastern Time, with the performance location set at Adelphi, Maryland, 20783. The contracting office is the W6QK Acc-Apg Adelphi under the Department of Defense, and all inquiries should be directed to Melissa M. Murphy, the primary point of contact, or Andrew Merdoc as the secondary point of contact, using the provided email addresses and phone numbers. Full technical specifications and requirements are referenced in the attached “Salient Characteristics” document, which must be consulted to understand the complete scope of the equipment and performance expectations.
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
Federal
Electrical Performance Monitoring System
Solicitation # 1333ND26QNB030356
The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for an Electrical Performance Monitoring System under solicitation number 1333ND26QNB030356, posted on August 4, 2026, with responses due by August 19, 2026. The contract is not subject to any small business set-aside and falls under NAICS code 334515, indicating it relates to the manufacturing of instruments and related products for electrical measurement and testing. Proposals must be submitted to the Office located in Gaithersburg, Maryland, 20899, with no specific place of performance designated beyond this. Jennifer Lohmeier is the primary point of contact, reachable via email at jennifer.lohmeier@nist.gov or phone at 301-975-6289, and all inquiries should be directed to her. The full solicitation details are available through the provided SAM.gov link, and contractors are expected to meet the technical requirements outlined in the attached documents for deploying a system capable of comprehensive electrical performance monitoring.
Department Of Commerce Nist

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
Federal
Spectrum Analyzers
Solicitation # FA930226Q0096
This solicitation seeks commercial spectrum analyzers under a combined synopsis and request for quote (RFQ) numbered FA930226Q0096, issued under RFO Part 12 procedures with no separate written solicitation. The acquisition employs a Best Value Tradeoff approach where technical acceptability is the primary evaluation factor, and price is secondary; failure to fully meet all technical requirements detailed in Attachment 1 will render an offer non-responsive. The technical specification demands include a built-in SCPI recorder as a mandatory feature to enable automated test environment development without requiring unavailable software engineering resources, as the absence of this capability would cause unacceptable delays and jeopardize the program’s Initial Operational Capability deadline. The period of performance is 12 months from award, with deliveries FOB destination, and all offers must include complete contractor information including SAM UEI, TIN, CAGE code, warranty, payment terms, point of contact, and a certification for exemption from Service Contract Labor Standards. Offers must be submitted via email as single PDF files not exceeding 10 MB, with an SF1449 form optionally attached, and must include all applicable RFO provisions and clauses referenced from Acquisition.gov. No negotiations are anticipated, and bids must reflect the offeror’s best terms upfront. The solicitation closes on August 7, 2026 at 10:00 AM Pacific Standard Time, with no late submissions accepted, and inquiries must be submitted by August 6, 2026 at 9:00 AM PDT to the designated point of contact. Submissions must be emailed to both Carmen Barahona and Falilou Diouck at their government email addresses. The North American Industry Classification System code is 334515, with a size standard of 750 employees, and no set-aside is in effect. The government reserves the right to request clarifications but will not engage in price or technical negotiations; awards will be made to the responsible offeror deemed to provide the best value based on technical superiority first, then price. Failure to provide any required documentation, including the SCPI recorder functionality or the certification for labor standards exemption, will result in the offer being deemed unacceptable. No financial obligation arises until a fully executed contract document is issued, and no work may commence prior to contract award.
FA9302 Aftc Pzz

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
Federal
100% Small Business Set-Aside Optical Spectrum Analyzer
Solicitation # W911QX26QA173
The contract is a 100% small business set-aside for the procurement of one optical spectrum analyzer, with specific technical requirements detailed in the attached salient characteristics. It is issued under solicitation number W911QX26QA173 by the Department of Defense through the W6QK Acc-Apg Adelphi office, and is classified under NAICS code 334515 for electronic instrumentation manufacturing. The solicitation was posted on August 4, 2026, with a firm response deadline of August 11, 2026, at 4:00 PM Eastern Time. The place of performance is Adelphi, Maryland, 20783, and the only point of contact is Morgan Evans, who can be reached via email at morgan.j.evans6.civ@army.mil or by phone at 520-672-9578. The contract is a combined solicitation, and all bids must come from certified small businesses qualifying under the set-aside program.
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
Federal
66--OHMMETER
Solicitation # N0038326QPC25
The item identified by NSN 1R-6625-015427487-TX, titled 66--OHMMETER, is a commercial, nondevelopmental, off-the-shelf product requiring Government source approval prior to contract award due to its flight-critical nature or insufficient technical data to support full and open competition. Only previously approved sources have been solicited, and any offeror not already approved must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, including evidence of production experience with identical or similar items. Proposals lacking complete source approval data or proof of prior submission will be disqualified. Delivery is FOB origin for nine units, and award is contingent on the offeror, product, or manufacturer meeting all qualification criteria at the time of award per FAR clause 52.209-1. The solicitation emphasizes that delays in source approval may not hinder award if Fleet operational needs necessitate timely procurement. Technical specifications and standards can be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not available through these channels. All inquiries should be directed to the primary point of contact, Dana N. Knittel, at the NAVSUP Weapon Systems Support office in Philadelphia, PA.
Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334515
New
Federal
One (1) Aribitrary Waveform Generator
Solicitation # W911QX26QA190
A single arbitrary waveform generator is being procured under solicitation number W911QX26QA190, issued by the Department of Defense through the W6QK Acc-Apg Adelphi office located in Adelphi, Maryland. The presolicitation notice was posted on August 4, 2026, with responses due by August 10, 2026, at 7:00 PM Eastern Time. This acquisition carries no set-aside designation and falls under NAICS code 334515, which pertains to the manufacturing of instruments and related products for laboratory and industrial use. The primary point of contact for inquiries is Morgan Evans, reachable via email at morgan.j.evans6.civ@army.mil or by phone at 520-672-9578, with Douglas Dennard available as a secondary contact. The equipment is expected to be delivered and performed at the Adelphi, Maryland location, with all details outlined in the attached Presolicitation Notice and Salient Characteristics.
W6QK Acc-Apg Adelphi

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
BLADE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-307H
The contract specifies the procurement of a Miller Size 0 newborn infant laryngoscope blade, a sterile, disposable, fiberoptic device made of stainless steel and designed for use with standard fiberoptic handles. It is regulated by the FDA as a Class II medical device, requiring compliance with labeling, registration, listing, and GMP standards, though a 510(k) clearance is not mandatory. The item must be supplied by Henry Schein, Inc. under part number 8575362 or Dyna Med under part number A22195, and bidders must clearly identify the source and part number being offered. Packaging must conform to commercial standards and Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. The NSN is 6515-01-396-2848, with a unit of issue of each (EA), and the contract calls for delivery of one unit within 20 days FOB destination. Inspection and acceptance occur at the delivery point, with no tolerance for quantity variance. All packaging and marking must adhere to MIL-STD-2073-1E, and the solicitation is issued under SPE2DS-26-T-307H with a response deadline of August 10, 2026. The procurement is governed by DLA packaging and quality requirements, and any applicable defense information controls must be observed.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-307G
The contract specifies the procurement of 4 units of an oral airway device identified by NSN 6515-01-708-4612, described as a Guedel-style, smooth, flexible polyethylene oral airway with a reinforced bite block, designed for single-use applications. The device is color-coded for easy identification, non-sterile, and free from natural rubber latex, available in eight sizes with embossed measurements in millimeters for quick reference. All units must be individually sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe, cost-effective delivery to the designated point of performance in APO, 09126-3865. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly state the source and part number being offered. The procurement falls under the DLA Master List of Technical and Quality Requirements with specific references to RA001, RP001, and RQ011, governing technical compliance, packaging, and removal of government identification from rejected items. The solicitation issued under SPE2DS-26-T-307G has a response deadline of August 10, 2026, with delivery required within 20 days after award, and is sourced through the Department of Defense's Medical Supply Chain for surgical support.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-310K
The contract specification details a disposable adult electrocardiogram electrode with a nominal diameter of 2.000 inches, designed for use with defibrillator/monitor-recorder systems identified by NSNs 6515-01-582-4060 and 6515-01-582-4072. Each electrode features a high-tack foam backing, wet gel conductive medium, and a silver/silver chloride sensor, and is radiolucent for compatibility with imaging procedures. The product is packaged in quantities of five electrodes per package, with sixty packages per case for a total of three hundred electrodes per case. The unit of issue is PG/40 each, and the NSN 6515-01-701-8690 is referenced for procurement. Strict compliance with DLA technical and quality requirements is mandated, as outlined in the DLA Master List, with applicable revisions controlled by solicitation or award date depending on acquisition scale. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. The requirement is for two packages, with delivery due within twenty days of award, under solicitation SPE2DS-26-T-310K, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance at Fort Bragg, North Carolina. Bidders must clearly indicate the source and part number being offered, and all responses are subject to the procurement’s deadlines and federal acquisition regulations.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
FIRST AID KIT, SMALL CR
Solicitation # SPE2DS-26-T-308T
This contract is for the procurement of a single small craft naval gun response first aid kit, specified by NSN 6545-01-648-2690 and part number P/N 80-0418, manufactured by NORTH AMERICAN RESCUE, LLC. The kit consists of a lightweight, olive drab green outer bag constructed of 500D Cordura solution-dyed nylon, designed for durability and resistance to sand and water, with self-repairing zippers and silent 550 paracord pull loops. It includes two removable internal pouches secured via hook-and-loop fasteners, each equipped with antipilferage seals for security. The contents are two identical Naval Gun Response Aid Pouches (PN 80-0357), one Naval Gun Response Bag (PN 80-0417), and critical medical items including two 34 Fr and two 28 Fr nasopharyngeal airways, two surgical lubricants, two Combat Application Tourniquets, two 6-inch and two abdominal/stump emergency trauma dressings, two HyFin chest seals, two 7.25-inch trauma shears, four SAM Splint II devices, two three-inch elastic wraps, and two permanent markers. All components are required to be delivered within nine months of manufacture, and the kit is not regulated by the FDA. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to ASTM D3951 if non-hazardous, with DLA technical requirements taking precedence. Shelf life is 60 months and non-extendable. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity. The kit must be shipped via traceable means, not parcel post, and delivered to the specified FPO address. All packaging and labeling must conform to DLA’s packaging standards, and the vendor must specify the exact source and part number supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, GAUZE
Solicitation # SPE2DS-26-T-309P
The product is a proprietary non-woven cotton blend rolled wrapping gauze known as TACGAUZE, designed for superior fluid absorption and wound wrapping performance. It measures 4.5 inches in width and 120 inches in length, vacuum sealed and sterilized for single-use only. Each unit is identified by NSN 6510-01-676-3176, with a total quantity of two units required under solicitation SPE2DS-26-T-309P. The product must have a shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery to the government. All containers must be marked with the lot number and date of manufacture prefixed by MFD. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a protective container suitable for safe transit via common carrier to the delivery point in Raleigh, NC, with a 20-day delivery window. The supplier must specify the source and part number being offered, and all packaging and marking must meet DLA’s packaging and medical marking requirements as referenced in applicable technical and quality standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CONTAINER, SHARPS SHUTT
Solicitation # SPE2DS-26-T-309M
The container is a sharps shuttle storage unit designed for safe handling and disposal of medical sharps such as catheters and syringes used during emergency procedures. Constructed from unbreakable polypropylene with a ribbed texture for durability and grip, it features a one-piece red molded polypropylene top that includes a permanent locking mechanism to secure contents after final closure, while a temporary closure ensures containment during active use. The design meets the MMESO standardized joint product requirement and is intended for reliable, high-performance use in clinical environments. The unit is sold individually with the NSN 6515-01-518-8551 and must be supplied with clear identification of source and part number. Compliance is required with DLA technical, quality, and packaging standards, including provisions for removal of government identification from non-accepted supplies and potential handling of covered defense information. The solicitation is issued under contract SPE2DS-26-T-309M by the Department of Defense’s Medical Supply Chain, with a response deadline of August 10, 2026, and a required delivery within 20 days of award to FPO, 96677.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TESTER, LEAKAGE, COLONOF
Solicitation # SPE2DS-26-T-309A
The contract pertains to the procurement of a Tester, Leakage, ColonofiberScope, identified by NSN 6515-01-312-0897, with a unit of issue of each. The item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information requirements apply, and bidders are required to specify the source and part number being offered. The solicitation is for one unit under purchase request 7017735390 with a delivery deadline of 20 days after order. The solicitation number is SPE2DS-26-T-309A, issued on August 4, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, and performance is designated to FPO with a ZIP code of 96616. Primary point of contact is Colin Owens, reachable via email and phone provided.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DOPPLER, BLOOD FLOW
Solicitation # SPE2DS-26-T-307Y
The contract pertains to the procurement of a handheld Doppler blood flow device, specifically the Summit Doppler LifeDOP 150 Series equipped with an audio recorder and an 8 MHz vascular pencil probe, designed for non-display vascular assessment and requiring three AAA batteries. The unit is sold individually and must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is regulated by the FDA, necessitating a referral through EBS to a product specialist for confirmation prior to award, including details such as bidder and manufacturer information, part number, and item description. The National Stock Number is 6515-01-734-9276, with a requirement for four units to be delivered within twenty days of award to Hurlburt Field, Florida, under solicitation SPE2DS-26-T-307Y. Bidders are required to clearly specify the source and part number being supplied. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026. Covered defense information potentially applies, and all supplies must comply with DLA packaging and government identification removal requirements for non-accepted items.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details