Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

SENSOR, OXYGEN MONIT

Awarded

SPE2DS-26-T-053BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of an oxygen monitoring sensor with a plastic housing and electrical cell, identified by NSN 6515-01-318-1535, under solicitation SPE2DS-26-T-053B. The item is designated as a TYPE I (CODE U) with a non-extendable shelf life of 96 months, and must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Packaging requirements mandate that each sensor be sealed in a protective container to prevent damage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the delivery point in APO, ZIP 96368-5268. The supplier must specify the source and part number being offered and ensure compliance with all technical and quality requirements outlined in the DLA Master List, with the applicable revision determined by the solicitation or award date. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The contract has a 20-day delivery timeline and is issued under the NAICS code 339113 by the Department of Defense’s Medical Supply Chain.

General Info

Procurement of sensor with plastic housing, sealed packaging, 96-month shelf life, delivery in 20 days.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$143.44

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SZY HOLDINGS, LLCView Profile

Award Issued Date

06/09/2026, 12:00:00 AM UTC

Documents

(2)

SPE2DS26V6455.pdf

PDF

SPE2DS-26-T-053B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMay 6

Solicitation

AwardedJun 9

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Marc Canalichio

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DS26V6455 posted on DIBBS. Awardee: SZY HOLDINGS, LLC (CAGE 0AG09) Total Contract Price: $143.44 Award Date: 06-09-2026 Solicitation: SPE2DS-26-T-053B Line items: - SENSOR, OXYGEN MONIT (NSN/Part 6515013181535, PR 7016655668)

Similar Contracts

Same NAICS industry code

INDICATOR, CARBON MONOX

Solicitation # SPE7M0-27-Q-0007

This contract is a firm fixed price solicitation for the procurement of four carbon monoxide indicators, specifically part number BWC2-M25100 from Honeywell Analytics Inc. The items are designated as critical application items with a twelve month extendable shelf life. Delivery is required within 30 days after order to the USS Ralph Johnson DDG 114, with inspection and acceptance occurring at the destination. Suppliers must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and compliant labeling per OSHA and Federal Standard 313-E. The contract prohibits the intentional addition of mercury except in specific functional components and requires compliance with MIL-STD-129 for marking and RP001 for palletization. Because the items contain lithium batteries, they must be handled and shipped according to hazardous materials packaging and shipping regulations.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

Liquid Handling Robot Equipment Supplier

Usda, Fsis, Oas Pcmb

POSTED

about 12 hours ago

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH36

This fixed-price solicitation from DLA Mechanicsburg is for the manufacture and supply of a pressure transmitter, specifically referencing Cage Code 81349 and part number PGT-GP-100-G2. The contract requires the item to be listed on Qualified Products List 24212, and award evaluations will be based on Lowest Price Technically Acceptable criteria. Contractors must provide an informal cost breakdown to determine fair pricing and must identify the Original Equipment Manufacturer if they are not the manufacturer themselves. Key administrative requirements include the mandatory use of Wide Area Workflow for combined invoice and receiving reports and CMMC Level 1 self-certification for cybersecurity. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. The government mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a fee to cover administrative costs. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

66--THERMOCOUPLE,IMMERS

Solicitation # SPE4A5-26-T-419L

This contract is for the procurement of 49 immersion thermocouples, identified by NSN 6685-01-451-2603, under solicitation SPE4A5-26-T-419L. The items are designated as critical application commercial items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is September 22, 2025, with a delivery window of 183 days. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the items must be marked according to MIL-STD-129. The contract is a total small business set-aside under NAICS code 334513.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

66--SENSOR,AMBIENT TEMP, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYABL

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks a contractor for the repair and modification of ambient temperature sensors. The requirement is designated as a DO-rated order for national defense under the Defense Priorities and Allocations System and is being processed under Emergency Acquisition Flexibilities. The solicitation deadline has been extended to September 24, 2026. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and strict adherence to mercury-free standards to prevent contamination on submarines and surface ships. Contractors must be authorized distributors of the original equipment manufacturer or the OEM itself, providing a signed letter of authorization if applicable. The contract includes a one-year warranty after delivery and requires the use of Wide Area Workflow for combined invoice and receiving reports.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

59--SWITCH, TEMPERATURE

Solicitation # N0010426QEG53

This presolicitation notice from the Navsup Weapon Systems Support Mech involves the procurement of four temperature switches under NSN 1H-5930-016711956, TDP VER 002. The items are to be delivered to DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. Due to the fact that the government does not own the data rights and reverse engineering is deemed uneconomical, the government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1. While this is not a formal request for competitive proposals, interested sources may submit capability statements or proposals within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. The government is not currently utilizing FAR Part 12 for commercial item acquisition, though interested parties may notify the contracting officer of their ability to provide a commercial item within 15 days. All inquiries and submissions should be directed to the primary point of contact, Amber C. Long.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Digital Display Indicator Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pressure Transmitters (NSN 6685-01-573-6438)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

OEM Component Supply: Liquid Quantity Transmitter

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Liquid Level Switches (NSN 5930-01-615-3448)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Motion Detector (NSN 6350661603949)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SWITCH, LIQUID LEVEL

Solicitation # SPE7M0-26-T-064Z

Solicitation SPE7M0-26-T-064Z is a request for quotations issued by the DLA Land and Maritime agency for the procurement of two liquid level switches, identified by NSN 5930-01-137-4705. The requirement specifies parts from Setra Systems, Inc. (P/N 34599 or LS-34768-1). Delivery is required within five days after receipt of order, with an original required delivery date of September 2, 2026. The items are to be delivered FOB Origin and shipped to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance will also take place at the point of origin. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking performed according to MIL-STD-129. Special restrictions include the prohibition of intentionally added mercury or mercury-containing compounds, except for specific functional requirements. The procurement is subject to the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. This is a small business set-aside under NAICS code 334513.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 7 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

POSTED

about 7 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

This contract, solicitation number SPE7L7-26-T-5218, is issued by the Defense Logistics Agency for the procurement of three storage batteries, specifically East Penn Manufacturing Co. part number 18-G75-21EE. The acquisition is designated as a total small business set-aside under NAICS code 335910. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 20 days after receipt of order, with the destination and inspection point set as the NAVSUP FLC Material Process Center in Japan. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Specific packaging and shipping protocols for hazardous materials are required per IP025 and RP001. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for functional mercury used in batteries as specified by NAVSEA. All packaging must comply with MIL-STD-2073-1E, and the items must be delivered FOB destination.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS