This Solicitation opportunity from Department Of Defense was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SERVOVALVE, FUEL CON

Closed

SPE4A6-26-T-05FFFederal

Submission Closed07/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333611

New

Federal

BEARING ASSEMBLY,TUThis contract pertains to the repair of the BEARING ASSEMBLY,TU under a fixed-price arrangement with strict compliance requirements for quality, inspection, and documentation. The work must adhere to the contractor’s approved repair standards, technical orders, and manufacturer specifications, with all repairs requiring exact alignment to the specified CAGE code 90099 and reference number 1387F17G01. Item marking must follow MIL-STD-130 Rev N, and any changes to design, materials, or part numbers require prior written approval from the NAVICP-MECH Contracting Officer, categorized under one of six code types detailing the nature of the substitution. The contractor is fully responsible for all inspection and testing procedures, ensuring compliance with both government standards and original manufacturer requirements, and must maintain complete inspection records for 365 days after final delivery. The contract mandates adherence to Buy American and Free Trade Agreements, with applicable certification requirements, and includes a total small business set-aside with restrictions on pass-through charges. A one-year warranty covers supplies after delivery, with defects must be reported within 45 days of discovery. Packaging must conform to MIL-STD-2073, and all technical documents referenced must be obtained through authorized DOD channels, with specific procedures for restricted or classified materials. The solicitation is limited to authorized distributors of the original manufacturer, who must provide proof of authorization. The North American Industry Classification System code is 333611, with a small business size standard of 1,500 employees, and the contract was posted on July 27, 2026, with a response deadline of August 24, 2026. All communication and submissions must be directed to the designated point of contact at the Naval Supply Systems Command in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

VALVE, PILOT GOVERNORThe contract is for a single unit of a valve, pilot governor, specifically designated for use in an E/I steam turbine with the NSN 2825-01-214-9012 and part number 916395, supplied by either Siemens Government Technologies or Curtiss-Wright Electro-Mechanical Corp. The item is classified as a critical application and a Navy field level reparable, requiring strict configuration control in accordance with MIL-STD-973. All materials must comply with strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, wrapping materials, and unit container codes, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and delivery is to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered within 165 days of contract award, with a required ship date of January 19, 2027, and an original delivery deadline of January 1, 2029. The procurement is governed by DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L5-26-T-4627, issued under NAICS code 333611 by the Department of Defense, with a single unit purchased at a specified unit price and no variance permitted in quantity.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

SHROUD SEGMENT, TURBThe contract pertains to the procurement of 11 shroud segments for use in a turbine system, identified by NSN 2840-01-689-4848 and part number 5200T09G08, under solicitation SPE4A5-26-T-309M. Delivery is required within five days of award, with all items to be delivered FOB origin and subject to zero variance in quantity. Inspection and acceptance occur at the point of origin, and all packaging must adhere to MIL-STD-2073-1E with specific methods defined for preservation, wrapping, and containment, while marking complies with MIL-STD-129 and includes no special marking code. The item is classified as a critical application item and is subject to stringent quality and configuration control requirements through standardized military specifications and tailored higher-level quality provisions, including compliance with MIL-STD-1916 or equivalent zero-based sampling plans for verification, with critical attributes assigned the strictest acceptance criteria. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including documentation standards for Source Approval Requests, configuration change management via Engineering Change Proposals, and the mandatory removal of government identification from non-accepted supplies. Packaging and shipping must follow DLA procurement guidelines, with freight routed to a designated facility at Cherry Point, North Carolina, and prohibited from using parcel post. The supplier is required to ship via the fastest traceable means, and the contract includes specific logistics identifiers, including a point of contact, delivery deadline of July 20, 2026, and associated program and project codes. All contractual obligations are governed by active DoD acquisition policies, and the unit of issue is defined by standardized ANSI X12 formatting as referenced by official DLA resources.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

28--VALVE,PILOT GOVERNORThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for one unit of NSN 2825012149012, a Valve, Pilot Governor, to be delivered to W1A8 DLA Distribution. The requirement is issued as a Request for Quote under solicitation number SPE7L526T4627, with responses due by August 6, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. Approved sources for this item are limited to 0BR59 916395, 8FGX3 916395, and 8FGX3 T916395. All responsible suppliers may submit a quote provided it is received on time, though no specifications, plans, or drawings are provided. The North American Industry Classification System code is 333611, indicating the procurement falls under internal combustion engine and engine parts manufacturing. The award will be made to the most responsive and responsible offeror, with delivery expected within 165 days after contract award. Primary inquiries must be directed via email to DibbsBSM@dla.mil, and the full solicitation can be accessed online through the SAM.gov portal using the provided UI link.

DLA Land And Maritime

POSTED

DEADLINE

RING, PISTONThe contract pertains to the procurement of four CRIMPED EXPANDER RING PISTON RINGS with NSN 2825-01-325-6804 under solicitation SPE7L1-26-T-7858, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 20 days of award, and the purchase request number is 7014948238. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and performance is to occur at FPO, ZIP 09564. Point of contact is Kristina Derry, reachable via email and phone provided, and details are accessible through the DIBBS portal.

POSTED

DEADLINE

SEAL RING, EXHAUSTThe contract solicits a SEAL RING, EXHAUST with part number 759J037-41, manufactured by Northrop Grumman Systems Corporation, identified by NSN 2825-00-296-0801, for a quantity of two AY units under solicitation SPE4A6-26-T-06YD. This is a total small business set-aside under NAICS code 333611, with a requirement that all offerings must be produced using conventional manufacturing methods—additive manufacturing is expressly prohibited and disqualifies offers. The item is designated as a critical application item, subject to stringent quality and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, with all attributes assigned verification levels or AQLs as per MIL-STD-1916 or comparable zero-based sampling plans. Inspections and acceptance occur at the destination under FAR 52.246-2, with sampling requirements mandating zero non-conformances for acceptance unless otherwise specified. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Delivery is FOB origin with a 140-day delivery window following order receipt, to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, by June 9, 2026, with an original delivery deadline of December 26, 2026. The contractor must comply with extensive cybersecurity and compliance obligations, including CMMC Level 2 self-assessment, safeguarding covered defense information per FAR 252.204-7012, and adherence to NIST SP 800-171 DOD assessment requirements. Prohibitions on hazardous materials are strict: mercury and mercury compounds are forbidden except in specific exempted applications such as certain batteries or sensors, with portable mercury-containing devices requiring shockproof construction and secondary containment in line with NAVSEA standards. Hexavalent chromium is banned, and all hazardous materials must be labeled in accordance with the Hazard Communication Standard unless covered by other federal statutes. The contractor is required to maintain current representations in SAM, certify small business status, and comply with whistleblower protections, anti-trafficking, and employment verification mandates. Payment must be processed through Wide Area Workflow with electronic invoicing and receiving

ASC COMMODITIES DIVISION

POSTED

DEADLINE

40HP Surface Drive Outboard Motor SupplyThe contract requires the supply of a new, commercially available 40HP surface drive outboard motor designed specifically for shallow-water mud boat operations, ensuring suitability for demanding environments where traditional propeller systems are ineffective. The motor must be an OEM product with full manufacturer warranty and accompanying documentation to verify authenticity, performance specifications, and compliance with operational standards. It is intended for integration into a custom-built aluminum boat, necessitating compatibility with the vessel’s mounting system, fuel delivery, and control interfaces without requiring major modifications. This is a subcontract under the agency jurisdiction of the Texas Parks and Wildlife Department, with a posting date of July 24, 2026, and a response deadline of August 7, 2026. The North American Industry Classification System code 333611 confirms the scope as related to boat building and repair. The motor must be delivered and ready for immediate installation, with all necessary technical and warranty materials provided in a format acceptable for federal and state procurement compliance. Performance is expected to meet or exceed industry standards for durability, fuel efficiency, and reliability in muddy, high-obstacle water conditions, and all components must be new, unmodified, and sourced from a recognized and reputable manufacturer.

Parks and Wildlife Department

POSTED

DEADLINE

40HP Surface Drive Outboard Motor SupplyThe contract calls for the supply of three new 40HP surface drive outboard motors specifically engineered for shallow water operations, with full compatibility required for designated aluminum mud boats. These motors must be fully operational upon delivery and meet all technical specifications necessary for reliable performance in demanding aquatic environments, particularly where traditional propeller-driven systems are unsuitable. The equipment is intended for use by the Texas Parks and Wildlife Department, supporting their operational needs in coastal, marsh, and low-depth water areas where maneuverability and minimal draft are critical. The solicitation is classified as a subcontract under NAICS code 333611, with a response deadline of August 7, 2026, at 8:00 PM CT. The contract was posted on July 24, 2026, and is available through the Texas SmartBuy portal, indicating it is procured under a state-level procurement system. While no set-aside designation or point of contact is provided, the place of performance and agency details confirm the motors will be utilized within Texas for public land and water resource management activities. All bids must meet the functional and performance criteria outlined to ensure seamless integration with existing aluminum mud boat fleets.

Parks and Wildlife Department

POSTED

DEADLINE

J059--Preventative Maintenance-Emergency Generators | Follow on Base+4 | Start: 9/30/26This contract is a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS code 333611 for preventive maintenance services on emergency and standby generators at the Chillicothe VA Medical Center in Ohio. The base period of performance spans one year from September 30, 2026, through September 29, 2027, with four additional one-year option periods available for extension. The scope requires the contractor to perform annual and semi-annual maintenance on ten emergency generators, three standby generators, and three mobile generators, including annual load banking, oil and fuel sampling, and full compliance with OSHA and NFPA codes. All work must adhere to the VA’s security management program, requiring prior approval from VA police and proper identification of personnel; unauthorized access is strictly prohibited. The contractor is responsible for providing all labor, equipment, materials, and incidentals necessary to fulfill the requirements. The solicitation was issued as a combined solicitation with a response deadline of August 17, 2026, and all materials including specifications and drawings are distributed electronically via SAM.gov. Proposals must be submitted by eligible SDVOSBs registered and verified in both SAM.gov and VetCert.gov, with registrations required to be current and accurate prior to the deadline. The contracting office is the Department of Veterans Affairs, 250-NETWORK Contract Office 10, located in Columbus, Ohio, with Stanley Burdine serving as the contracting officer. A mandatory site visit is scheduled for August 3, 2026, at the Chillicothe VAMC location. No contract value is disclosed, and no specific pricing, inspection, or packaging criteria are outlined in the provided documentation. All communications must be submitted in writing to the contracting officer, and telephone inquiries are not accepted. Amendments to the solicitation will be posted exclusively on SAM.gov, and offerors are responsible for monitoring updates and acknowledging all changes prior to proposal submission under the terms of FAR 52.212-4.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Centrifugal Pump Parts Kit SupplyThe contract requires the supply and delivery of five units of a centrifugal pump parts kit that meets all federal standards for packaging, labeling, and shipping. The solicitation is issued under the NAICS code 333611 for pump and pumping equipment manufacturing and is classified as a subcontract under the Department of Defense’s Maritime Supply Chain organization. Responses must be submitted by August 3, 2026, with the requirement posted on July 23, 2026. The parts kit must be delivered to a specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. All items must comply with federal regulations to ensure safe handling, proper identification, and authorized transport through government logistics channels. The contract is accessible via the DIBBS portal for further details and submission instructions.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEAL RING ASSEMBLY,The contract pertains to the supply of one SEAL RING ASSEMBLY with NSN 2825-01-062-9323 and part number 1388F01H02, manufactured to meet Northrop Grumman Systems Corporation’s technical drawing revision A dated 02/20/1975. Delivery is required within 601 days from the contract date, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The item is classified as a critical application part and must conform to stringent packaging, preservation, and marking standards outlined in MIL-STD-2073-1E and MIL-STD-129. Labyrinth packing rings or dirt and oil deflectors must be immediately preserved with P-2 preservative per MIL-C-16173 Grade 2 upon cleaning and drying, with ferrous components only requiring treatment. Each segment must be individually bagged with quarter-inch thick cushioning per PPP-C-850 Type II Class 1, separated by ASTM D4727 fiberboard, and enclosed in a unit container padded with at least one inch of approved cushioning material. Sets under 40 pounds may be packaged in ASTM D5118 fiberboard boxes, while those 40 pounds or more require overseas-style wood boxes per ASTM D6251 or PPP-B-621, secured with flat steel strapping conforming to ASTM D3953 Finish C. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like batteries, lights, or sensors as defined by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified. All packaging must meet DLA’s procurement requirements, and item marking must comply with MIL-STD-129 without unique identification, as per DFARS 252.211-7003(c)(1)(i). The solicitation number is SPE4A6-26-T-09JD, with responses due by July 31, 2026, and the primary point of contact is Charleen Weber at DLA.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SEAL RING, INLETThis contract is for the procurement of a SEAL RING, INLET with NSN 2825-00-296-0741 and part number 759J037A35, supplied by NORTHROP GRUMMAN SYSTEMS CORPORATION, under solicitation SPE4A6-26-T-06UB. The requirement is for four units to be delivered FOB DESTINATION to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 372 days from the order date, targeting a ship date of July 31, 2027. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Item-level identification is not mandated under DFARS 252.211-7003, but physical bare item marking per RQ017 is required. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion; critical, major, and minor attributes must be verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Mercury and mercury-containing compounds are strictly prohibited from contacting the hardware unless used in exempted applications such as batteries, sensors, or instruments under NAVSEA 5100-003D, which requires shock-proof design and a secondary containment barrier. The item is classified as a critical application item and must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The contractor must implement a CMMC Level 2 Self-Assessment for cybersecurity compliance and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. The contract includes multiple FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material safety, inspection at destination, contract type, small business representation, subcontracting, and prohibitions on covered telecommunications equipment and unauthorized obligations. Payment is to be processed through WAWF, and all invoices for this fixed-price item must be submitted with an invoice and receiving report. The contract prohibits the use of mandated arbitration agreements and requires compliance with hazard communication standards under DFARS 2

ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in about 15 hours

AI Contract Overview

This contract specifies the procurement of a servovalve for fuel control, identified by part number 100312-003 from Woodward Inc. and 161403-3 from RTX Corporation, with the NSN 2835-01-152-6306. A quantity of 15 units is required to be delivered within 185 days FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. The item is classified as a critical application, subject to stringent quality controls including zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are governed by the DLA Master List referenced in the contract, and documentation for source approval must adhere to RC001. The contract is issued under solicitation SPE4A6-26-T-05FF, with a response deadline in July 2026, and delivery must be shipped to DLA Distribution Cherry Point in North Carolina. All items must meet tailored higher-level quality requirements and applicable defense information handling standards.

General Info

Procurement of 15 servovalves NSN 2835-01-152-6306 via DIBBS by July 17, 2026, no set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05FF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJul 9

Solicitation

Amendment 1Jul 9

Contract was updated

Response DeadlineJul 17

Deadline has passed

Submission Closed

07/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUS

Contacts

Sibel Claywell

contact@example.gov

+1 (555) 000-0000

Full Description

SERVOVALVE,FUEL CON
SERVOVALVE, FUEL CONTROL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
WOODWARD, INC. 66503 P/N 100312-003
RTX CORPORATION 55820 P/N 161403-3
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
SPE4A6-26-T-05FF
SECTION B
PR: 7017417754 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017417754 0001 EA 15.000
NSN/MATERIAL:2835011526306
DELIVERY (IN DAYS):0185
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:07/07/2026
SPE4A6-26-T-05FF
SECTION B
PR: 7017417754 PRLI: 0001 CONT’D

SPE4A6-26-T-05FF NSN/Part Number: 2835-01-152-6306 Quantity: 15 EA Purchase Request: 7017417754QTY: 15 Delivery: 185 days ADO