Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SETSCREW

Active
SPE4A6-26-T-05YBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 1,172 units of a setscrew identified by NSN 5305-01-229-7995 and part number MS51965-58, governed byTechnical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, marking, and inspection. The product must conform to NASM51965 Revision 3 and FF-S-200E Revision E, with sampling performed under MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all items must be marked per RQ017 with government identification removed from non-accepted supplies per RQ011. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The unit of issue is each (EA), with a required delivery within 84 days of contract award, targeting an original delivery date of December 14, 2026, and a need ship date of October 15, 2026. All shipments must be addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, and transportation must adhere to DLA Procurement Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-05YB, with Monica Greene as the primary point of contact.

General Info

Procure 1,172 setscrews per NSN 5305-01-229-7995, deliver by Dec 14, 2026, to New Cumberland, PA, FOB origin, zero-defect acceptance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05YB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MONICA GREENE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SETSCREW
SETSCREW
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NASM51965 REVISION NR 3 DTD 08/30/2024 PART PIECE NUMBER: STD P/N MS51965-58
TDP Rev B Gen 2 IAW REFERENCE UNK FF-S-200E REVISION NR E DTD 03/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-05YB
SECTION B
PR: 7017487457 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487457 0001 EA 1,172.000
NSN/MATERIAL:5305012297995
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/15/2026 Original Required Delivery Date:12/14/2026
SPE4A6-26-T-05YB
SECTION B
PR: 7017487457 PRLI: 0001 CONT’D
SPE4A6-26-T-05YB NSN/Part Number: 5305-01-229-7995 Quantity: 1,172 EA Purchase Request: 7017487457QTY: 1172 Delivery: 84 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED WASThe contract pertains to the procurement of 347 units of a plain extended hexagon nut with an extended washer, identified by NSN 5310-01-613-7050 and OSHKOSH DEFENSE LLC part number 4010502, under solicitation SPE7LX-26-U-8824. Delivery is required within 58 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence and must be followed, including proper marking and labeling per MIL-STD-129. Packaging and palletization must adhere to RP001 DLA Packaging Requirements for Procurement, with a Unit of Issue of EA and a Quantity per Unit Pack of 001. The contract is classified as DLA DIRECT CONUS and is governed by the DLA master requirements in effect on the solicitation issue date, with any deviations or waivers requiring formal engineering change proposal or variance request. All government identification must be removed from non-accepted supplies, and the item is subject to full compliance with DLA’s technical and quality standards. Purchasing is managed under PR 1000237414 with a unit price listed, totaling an estimated value based on the specified quantity. The solicitation was posted on July 14, 2026, with responses due by July 29, 2026, and is administered by the Department of Defense’s Strategic Acquisition Program Directorate through point of contact Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for 332 machine screws with NSN 5305-00-932-1831 under solicitation SPE4A6-26-T-06HB, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 359 days after award, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on July 14, 2026, and responses are due by July 22, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and compliance is mandatory. The item includes technical data subject to export control under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals within the U.S. Contractors must hold a valid US/Canada Joint Certification Program status, complete required DLA export control training, and receive explicit approval to access the controlled data. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed. Higher-level quality requirements apply regardless of whether the supplier is a manufacturer or not, and the contract incorporates DFARS 252.225-7048 to enforce export control obligations.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 72 units of a socket head cap screw, identified by NSN 5305-01-655-6878, under solicitation SPE4A6-26-T-06DS. The item is classified as a commercial item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which must be referenced for full compliance. Packaging, identification, and sampling standards must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required in samples unless otherwise specified, and attributes are to be evaluated with designated verification levels or AQLs. Physical marking of the item and removal of government identification from non-accepted supplies are mandatory per DLA directives. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to authorized entities only, including compliance with DFARS 252.225-7048. Access to controlled data requires DLA contractors to hold JCP certification, complete mandatory training, and receive formal approval. Delivery is due in 171 days after order, with performance located in New Cumberland, Pennsylvania, and the primary point of contact is Krystle Bailey of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract pertains to the procurement of 269 shear bolts designated as special high-strength fasteners for use by the Department of Defense aviation community. The items must be manufactured, tested, and inspected in strict compliance with required technical data and referenced specifications, with all Class 3A and 3B threads subject to dimensional conformity inspection per System 22 of Fed-Std-H28/20, excluding self-locking nuts and threads below specified diameters. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. All items require physical identification and bare item marking as specified. The solicitation, numbered SPE4A6-26-T-05XF, was posted on July 14, 2026, with responses due by July 22, 2026, and delivery is required within 171 days after delivery order issuance to New Cumberland, Pennsylvania, under NAICS code 332722. Primary point of contact is Tyler Greene of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 83 units of a hexagon cap screw with NSN/Part Number 5305-01-659-5180, under solicitation SPE4A6-26-T-06AY, with a delivery requirement of 171 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Items must be physically marked as specified, and sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned Verification Levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instrumentation, sensors, controls, weapon systems, or NAVALSEA-specified reagents; portable devices containing mercury must be shock-proof with a secondary containment barrier in accordance with NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 applicable. Access to export-controlled data is limited to DLA contractors who have obtained JCP certification, completed mandatory training, and received approval from DLA. The contracting office is the ASC Commodities Division of the Department of Defense, with performance located in New Cumberland, PA, and primary point of contact Ashley Sacolick.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details