Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SETSCREW

Active
SPE4A6-26-T-05SMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation is for 109 setscrews with NSN/Part Number 5305-01-526-4398, issued under solicitation number SPE4A6-26-T-05SM by the Defense Logistics Agency’s ASC Commodities Division. The requirement is designated for Small Disadvantaged Veteran-Owned Small Business Concerns and falls under NAICS code 332112. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire, and received official approval. The place of performance is Robins AFB, Georgia, with a delivery deadline of 662 days after order. The solicitation opened on July 13, 2026, and responses are due by July 21, 2026. Primary point of contact is Marisa Berestecky at the provided email and phone number.

General Info

109 setscrews for Small Disadvantaged Veteran-Owned businesses, ITAR-controlled, delivery to Robins AFB in 662 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

PR: 7013547769 PRLI: 0001 CONT’D, ROBINS A F B, GA, 31098-1887, US

Set-Aside

SDVOSBC

Documents

(1)

RFQ SPE4A6-26-T-05SM for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Marisa Berestecky
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SETSCREW
SETSCREW
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-526-4398 Quantity: 109 EA Purchase Request: 7013547769QTY: 109 Delivery: 662 days ADO

Similar Contracts

NAICS: 332112
New
DIBBS
Castings and Forgings Supply for Valve BodiesThe contract requires the supply of forged or cast valve body components engineered from stainless steel or high-performance alloys, specifically tailored for use in military fluid systems where reliability under extreme conditions is critical. These components must meet stringent material and dimensional specifications to ensure compatibility with high-pressure, corrosive, or high-temperature operational environments typical in defense applications. The work is being procured as a subcontract under the Defense Logistics Agency, with the NAICS code 332112 indicating classification within the forging and stamping industry sector, underscoring the specialized manufacturing capabilities required. Performance is expected to support Department of Defense fluid system requirements without geographic restriction, though the exact delivery locations are not specified. The contract was posted on July 13, 2026, and is accessible through the DLA’s DIBBS platform under contract number SPE7M426P1894. There is no set-aside designation noted, meaning the opportunity is open to all qualifying suppliers regardless of business size or status, provided they can demonstrate compliance with the technical, material, and quality standards required for military-grade components.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
ANGLE, STRUCTURALThe contract specifies structural steel angle components made of carbon steel, with an overall height of 3.000 inches, an overall width of 3.500 inches, and a flange thickness of 0.375 inches. The material must be extruded and supplied in lengths ranging from 30 to 40 feet, weighing approximately 7.90 pounds per foot, conforming to ASTM A6 Table A2.8 for L-shaped unequal leg sections. All material must comply with ASTM A6/A6M-24B and ASTM A36/A36M-19 standards, and must be supplied in whole-foot increments only. A Certificate of Quality Compliance, including mill material certification, is mandatory for each shipment and must be submitted to the DLA Troop Support Contracting Officer. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, manufacturer’s name, heat and lot number, and dimensions, with acceptable methods limited to stamping or stenciling that ensures legibility and durability without contamination. Adhesive labels are required for small diameter bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special marking codes Z and ZZ applied per ASTM A700, and all shipments must include dual-unit markings when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly declared. Products not sourced from QSLD-approved distributors will be considered unauthorized substitutions, potentially subjecting the supplier to criminal and civil penalties. Quality conformance inspections such as COQC, PVT, QAP-EQ003, and RQ006 are waived for compliant QSLD suppliers unless otherwise specified. The material must be shipped FOB origin with a firm fixed price and zero quantity variance. Delivery is required within 30 days of award, with destination as the inspection and acceptance point. Packaging and marking follow the detailed specifications of MIL-STD-2073-1E and MIL-STD-129, with special preservation and labeling codes as outlined. The delivery address is a U.S. Naval Base in Sasebo, Japan, and the contract falls under the Defense Logistics Agency
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract specifies the procurement of five machine bolts, part number AN3C34, under NSN 5306005793713, with delivery required within 20 days FOB destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001, including proper identification markings per MIL-STD-130N. Inspection and acceptance occur at the destination, with zero non-conformances required under sampling protocols mandated by MIL-STD-1916 or comparable zero-based plans, unless otherwise specified. The bolts must be manufactured in accordance with NASM3 through NASM20 Revision 5 and NASM6812 Revision 4, with all labeling, packing, and palletization following strict government packaging directives. The destination is USS GEORGE WASHINGTON CVN 73, FPO AP 96607, with shipment handled via DLA’s VSM system under RDD 777, and transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE4A6-26-T-05NH, with a required delivery date of July 8, 2026, and no quantity variance is permitted.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEADThis contract specifies the procurement of 2,658 hexagon head cap screws under NSN 5305-01-237-6733, with a delivery requirement of 151 days after award. The solicitation, issued under SPE4A6-26-T-05PL by the Department of Defense’s ASC Commodities Division, is fully competitive and governed by applicable military and federal specifications. Strict restrictions prohibit the intentional addition of mercury or mercury-containing compounds in any hardware supplied, with exceptions limited to functional mercury in batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specifically authorized by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. All Class 3A and 3B threads must be inspected for dimensional conformance using System 22 of FED-STD-H28/20, excluding small internal and external threads below specified diameters. Sampling standards require adherence to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes must be verified at specified levels or AQL values. Mandatory identification marking follows MIL-STD-130N, and items must be labeled per RQ017 requirements. Government identification must be removed from non-accepted supplies as per RQ011, and packaging must meet DLA standards under RP001. Covered defense information applies under RD002, and cybersecurity compliance requires either CMMC Level 2 certification by a C3PAO or a self-assessment under RD005 and RD004. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date. The place of performance is Robins AFB, Georgia, and inquiries should be directed to Lisa Harvie at DLA.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, SHEARThe contract pertains to the procurement of 25 shear bolts, identified by NSN 5306-00-058-0850 and part number NAS628H29, manufactured in accordance with Technical Data Package Revision A Generation 3 and referenced quality assurance provisions QAP-13873. The item is classified as a critical application component and must comply with stringent technical and quality standards including MIL-STD-1916 or ASQ H1331 for zero-defect sampling, with all attributes requiring verification at designated levels unless otherwise specified. All packaging and marking must adhere to MIL-STD-129 and ASTM D3951, with DLA Master List requirements overriding any conflicting standards. Palletization and packaging must conform to DLA Packaging Requirements for Procurement, and each unit must be properly identified per physical identification requirements. Delivery is FOB origin with a 97-day lead time, final delivery due by July 13, 2026, and no quantity variance is permitted. Inspection and acceptance occur at the manufacturer’s origin. The contract mandates removal of government identification from non-accepted supplies and applies Covered Defense Information protocols. The unit of issue is each, priced at $25.00 per unit for a total of $625.00. The item must be shipped to DLA Distribution Jacksonville at the specified address, with transportation governed by DLAD procedural notes. The solicitation number is SPE4A6-26-T-05RC, issued under NAICS 332112, with primary point of contact Latoya Anderson. All terms are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details