Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SETSCREW

Active
SPE4A6-26-T-10DNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of setscrews meeting ANSI B18.3 specifications with a 0.375-16UNC-3A thread class and a 0.750 inch length, identified by NSN 5305-01-366-7601, for a quantity of 137 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation or award date depending on acquisition size. The item is subject to stringent quality conformance inspections, tailored higher-level contract quality requirements, and must adhere to DLA packaging standards. Physical identification and bare item marking are mandatory, and government identification must be removed from non-accepted supplies. Export control restrictions apply due to the presence of technical data regulated under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, including those within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access this technical data. The solicitation number is SPE4A6-26-T-10DN, issued by the Defense Logistics Agency’s ASC Commodities Division, with a response deadline of August 5, 2026, and a delivery requirement within 164 days after order placement. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Abigail Hatch, reachable via email and phone listed. Cybersecurity Maturity Model Certification Level 2 compliance by a certified third-party assessment organization is mandated. All performance and compliance obligations are subject to DFARS 252.225-7048 for export control of technical data, and the NAICS code 332722 applies to the industrial classification of this procurement.

General Info

Procure 137 ANSI B18.3 setscrews, NSN 5305-01-366-7601, per DLA specs, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-10DN.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Abigail Hatch
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SETSCREW
SETSCREW
SPECIFICATION
ANSI B18.3, 0.375-16UNC-3A X 0.750 (NICU) THREAD CLASS 3A
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the
SPE4A6-26-T-10DN
SECTION B
Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-366-7601 Quantity: 137 EA Purchase Request: 7017571995QTY: 137 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 33 shear bolts identified by NSN 5306-01-058-0729 and part number MS21296-07011 under solicitation SPE4A6-26-T-09YW. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific standards for inspection, packaging, marking, and dimensional control such as MIL-STD-130 for identification, ASME Y14.5 for tolerancing, ASME B46.1 for surface texture, and AS8879 for screw threads. The item is classified as a critical application and must meet zero non-conformance acceptance levels under sampling plans aligned with MIL-STD-1916 or ASQ H1331, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 guidelines. Item Unique Identification is not required per customer request, and government markings must be removed from non-accepted items. Inspection and acceptance occur at origin, with no variance allowed in quantity. Delivery is FOB origin with a required delivery date of October 4, 2026, and a need ship date of November 15, 2026. All items must be delivered to DLA Distribution San Diego at the specified address, and transportation logistics follow DLAD procedural notes. The unit price is $33 per piece, totaling $1,089.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 95 machine screws identified by NSN 5305-00-061-8243 and part number MS24693C288, classified as a commercial item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or amendment, and compliance with MIL-STD-1916 or ASQ H1331 sampling protocols is mandated unless otherwise directed, requiring zero non-conformances in the sample lot unless specified otherwise. All items must adhere to MIL-STD-130N for marking, with additional requirements for physical identification and removal of government identification from non-accepted supplies. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization compliant with DLA packaging standards, overriding any conflicting specifications. Delivery is due within 20 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination, and no quantity variance allowed. The shipment must be sent via traceable means, explicitly prohibiting parcel post, and delivered to Edwards Air Force Base, California, with specified freight and parcel addresses provided. The solicitation number is SPE4A6-26-T-09ZJ, with a response deadline of August 5, 2026, and the original required delivery date set for July 21, 2026. The Contract Line Item Number (CLIN) and purchase request are 7017589192 and 0001 respectively, with a unit price of $95.00 totaling $9,025.00. The unit of issue is each, and all documentation must align with DoD standardized formats. Identification and tracking are further governed by government-specific codes, and compliance with covered defense information protocols may apply. The point of contact for inquiries is Bernice Adams at DLA, and the contracting office is the ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDERThe contract specifies the procurement of one Screw, Shoulder with NSN 5305-01-713-9185 under solicitation SPE4A6-26-T-08BM, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within five days after order placement to the Portsmouth Naval Shipyard in Kittery, ME, with FOB Origin pricing terms. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, and must conform to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling, including preservation using Method 33 with cleaning and drying at Level 1 and no prohibited mercury compounds. Sampling for acceptance must follow MIL-STD-1916 or ASQ Z1.4 with a zero non-conformance policy unless otherwise specified, and unspecified attributes are treated as major. Technical data associated with the item is controlled under ITAR or EAR, requiring compliance with DFARS 252.225-7048 and restricting access to only DLA-approved contractors with JCP certification, completed training, and clearance. The offeror must comply with all applicable FAR and DFARS clauses including inspection at destination under FAR 52.246-2, electronic invoicing via WAWF, safeguarding covered defense information under 52.240-93 and 52.240-7997, prohibition of hexavalent chromium and toxic materials, restrictions on arbitration agreements, and representation of size status and socioeconomic certifications, though no offeror-specific data is provided. The underlying acquisition is likely evaluated on a Lowest Price Technically Acceptable basis, with no pricing details disclosed in the solicitation. The contract requires submission through the DIBBS portal by July 31, 2026, and imposes additional obligations such as prior submission of hazard warnings and MSDS for any regulated substances under 29 CFR 1910.1200 and DFARS 252.223-7001.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of one flat washer identified by NSN 5310015677565 under solicitation SPE4A6-26-T-10CJ, with a required delivery within 20 days of award and FOB origin terms. The item must comply with detailed technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes requiring zero non-conformances and acceptance levels of AQL 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. Packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements, and all items must be marked per RQ017 for physical identification. The contract authorizes Certificate of Conformance procedures unless overridden by a Quality Assurance Letter of Instruction, and mandates removal of government identification from non-accepted supplies. The delivery destination is Fort Riley, Kansas, with shipments required to be sent via the fastest traceable means excluding parcel post, and all units must be marked accordingly. The solicitation is open only for DIBBS access and includes specific technical drawings referenced with revision controls from 2012 and 2022. The contract imposes zero tolerance for quantity variance and specifies the unit of issue as one each, with a total price of one dollar. Government use fields and project identifiers are included for internal tracking, and the response deadline is August 5, 2026, with a posted date of July 28, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
RIVETThe contract pertains to the procurement of 4 units of rivets with NSN 5320-01-602-1983 under solicitation SPE4A0-26-T-4078, requiring delivery within five days FOB origin. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling as well as RP001 for overall packaging guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The rivets are to be shipped via traceable means excluding parcel post to the specified military facility in Jacksonville, NC, with the shipment controlled under DLA procedural notes C19 and C20. The unit price is $4.00 per EA, with no variance allowed in quantity, and the required delivery date is July 23, 2026. Government-use codes and identifiers, including the transportation control number and project code, are embedded in the shipment instructions, and the contract is administered by the Department of Defense’s Aviation Supply Chain ESOC Buys with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINEThe contract solicitation SPE4A6-26-T-10CS is a total small business set-aside for the procurement of 82 machine bolts with NSN 5306-01-564-3378, classified under NAICS code 332722. The contractor must deliver two units of this item within 90 calendar days from the contract date to the Fleet Readiness Center East in Cherry Point, North Carolina, for first article testing as mandated by FAR 52.209-4 and Alternate I. The government will evaluate these units and provide written approval, conditional approval, or disapproval within 90 days of receipt. These first article units are not counted toward the total production quantity and will be retained by the government, either destroyed during testing or preserved as a manufacturing standard. The full order of 82 units must be delivered within 448 days after contract award. Fast Pay is not applicable, and the contractor must demonstrate current dealer or distributor certification or accreditation, with no substitution of “other equivalent” items permitted without detailed justification. The procurement is managed by the Defense Logistics Agency’s ASC Commodities Division, with Tywanda Maddox Addington as the primary point of contact, and performance is required to be delivered to Tracy, California, with a response deadline of August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAGThe contract is for 75 self-locking hexagonal nuts identified by NSN 5310-00-722-8530, with a delivery requirement of 20 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment supersedes it. Physical identification and bare item marking must comply with RQ017, packaging must adhere to DLA standards under RP001, and government identification must be removed from non-accepted supplies as per RQ011. The solicitation number is SPE4A6-26-T-10AX, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332722 and is managed by the ASC Commodities Division of the Department of Defense. Performance is to be delivered to Enid, Oklahoma, ZIP 73705-5518, with primary point of contact Lisa Harvie, reachable via phone or email provided. The solicitation is a federal action with no set-aside designation.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 21,707 flat washers with NSN 5310-00-866-4418 under solicitation SPE4A6-26-T-09YV, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332722, with responses due by August 5, 2026, and delivery expected within 127 days after order. The item is subject to stringent quality and technical requirements, including CMMC Level 2 certification for any third-party assessment, tailored higher-level quality standards for both manufacturers and non-manufacturers, inspection and acceptance at origin, and specific markings for bare items. Technical data associated with this item is governed by export controls under ITAR or EAR, restricting access and disclosure to authorized entities only, requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors approved by DLA, holding valid US/Canada Joint Certification Program credentials, and having completed mandatory DLA training and questionnaires. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with Xavier Keyes designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLYThe contract is for the procurement of 406 screw assemblies identified by NSN 5305-00-606-2857, issued under solicitation SPE4A6-26-T-08AW by the Department of Defense’s ASC Commodities Division. Delivery is required within 182 days after award, with FOB Origin terms meaning title and risk transfer to the government upon shipment from the contractor’s facility, and final acceptance is to occur at the origin. The item must comply with MIL-STD-2073-1E for packaging and preservation, using specified methods including preservation method 41, cleaning/drying method 1, and preservation material 09, with intermediate containers in quantities of 56 and unit containers marked per MIL-STD-129, which also governs labeling, barcoding, and physical marking per RQ017. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons or entities, and only contractors approved by DLA with JCP certification and completed training may access such data. The screw assembly must meet stringent material and quality specifications, including ASME B18.2.1 for screws, SAE AS 9320 for washers, and ARMY DRAWING SDBX1 and RR-C-271 for chains, with inspection and acceptance governed by zero-defect sampling plans under MIL-STD-1916 or equivalent, and quality systems requiring compliance with SAE AS9003 or ISO 9001. Hazardous materials must be identified with full Safety Data Sheets submitted prior to award, labeled per OSHA’s Hazard Communication Standard and 252.223-7001, and any changes to composition must be reported. Radioactive materials exceeding defined thresholds require prior notification, and all such items must be labeled in accordance with MIL-STD-129. Cybersecurity measures are mandated under 252.204-7012 and 252.240-93, requiring safeguarding of covered defense information per NIST SP 800-171. The contract imposes restrictions on the use of covered telecommunications equipment, mandates compliance with trafficking in persons and employment eligibility verification, and prohibits the use of hexavalent chromium. Invoicing must be submitted via WAWF, and the
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThis contract specifies the procurement of one flat washer identified by NSN 5310-01-522-0662 under solicitation SPE4A6-26-T-10BM, with a required delivery within five days of order placement, FOB origin. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must follow MIL-STD-129 and DLA Packaging Requirements, with palletization adhering strictly to RP001. The washer must be free from intentional addition of mercury or mercury-containing compounds unless explicitly exempted, such as in functional components like sensors or weapons systems, and portable fluorescent lamps or instruments containing mercury must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; all unspecified attributes are deemed major, and acceptance requires zero non-conformances unless otherwise stated. Marking of the bare item must comply with RQ017, and any non-accepted supplies must have government identification removed per RQ011. Delivery must be shipped via traceable freight to the defined address at GD NASSCO, San Diego, not parcel post, and must adhere to the specified RDD and transit control number. The contract incorporates covered defense information under RD003 and enforces strict compliance with DLA unit of issue standards, with all documentation and labeling required to ensure full traceability and regulatory alignment.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThe contract pertains to the procurement of two plain hexagon nuts identified by NSN 5310-01-546-2313 with a delivery requirement of 10 days after award. All supplies must comply with DLA’s technical and quality requirements referenced by R and I numbers as defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must adhere to DLA packaging standards, and physical identification or bare item marking is required as specified under RQ017. Any non-accepted supplies must have government identification removed per RQ011. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero non-conformance acceptance criterion unless otherwise stated; critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are considered major. Manufactures may choose attribute or variable inspection under MIL-STD-1916 unless the contract directs otherwise. The solicitation number is SPE4A6-26-T-09ZR, issued on July 28, 2026, with responses due by August 5, 2026, under NAICS code 332722. Performance is located at Fort Leonard Wood, Missouri, and the primary point of contact is Hannah Shimer at hannah.shimer@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Counterfeit Electronic Parts Detection System ImplementationThe contract seeks the development and maintenance of a detection and avoidance system designed to identify and prevent the infiltration of counterfeit electronic components within the RF assembly supply chain. This effort is critical to ensuring the integrity and reliability of defense-related electronic systems by implementing advanced technologies that can authenticate components at various stages of procurement and assembly. The system must support real-time detection capabilities, integrate with existing supply chain workflows, and provide auditable logs to meet stringent defense standards for component traceability and provenance. The contractor will be responsible for ongoing system updates, calibration, and support to adapt to evolving counterfeit methods and emerging component technologies. This is a small business total set-aside subcontract under NAICS code 541330, indicating it is reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support defense supply chain operations, with performance likely requiring collaboration with government stakeholders and adherence to federal acquisition regulations. The emphasis is on innovation, rapid deployment, and sustainable maintenance to ensure long-term resilience against counterfeit threats in high-stakes RF applications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract requires the transportation of RF cable assemblies to locations within the contiguous United States, with strict compliance for international shipments using U.S.-flag vessels as mandated by federal regulations. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration guidelines are eligible to bid. The North American Industry Classification System code 484220 applies, indicating the scope centers on truck transportation for local and long-distance freight services, though international legs require vessel transport under U.S. registry. The contracting agency is the ASC Commodities Division within the Department of Defense, and the solicitation is open for responses until August 7, 2026, with a posting date of July 28, 2026. Performance locations span both domestic and international destinations, necessitating logistics providers to具备 the capability to navigate complex regulatory environments including maritime laws and defense logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541618
New
DIBBS
Export-Controlled Technical Data ManagementThis contract mandates the secure management and controlled distribution of technical data subject to the International Traffic in Arms Regulations and the Export Administration Regulations, requiring strict adherence to U.S. and Canadian Joint Certification Program standards to ensure compliance with bilateral export control requirements. All handling, storage, transmission, and access to regulated information must be executed through validated security protocols, approved facilities, and authorized personnel with appropriate clearances and training, ensuring no unauthorized disclosure or transfer occurs under any circumstances. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration, and is classified under NAICS code 541618 for other scientific and technical consulting services. It is issued by the ASC Commodities Division within the Department of Defense, with responses due by August 7, 2026, and is accessible via the DIBBS platform. Performance is expected to meet all federal export control obligations regardless of geographic location, with no specific place of performance identified, implying flexibility but with full accountability for compliance across all operational environments.
Other Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Defense-Grade Packaging and Marking ServicesThe contract entails the packaging and marking of RF cable assemblies in strict compliance with Defense Logistics Agency standards, ensuring full adherence to military-grade requirements for handling sensitive defense components. This includes implementing shock protection measures to safeguard assemblies during transit, applying government property labels as mandated, and securing the contents within tamper-resistant, containment-compliant packaging to maintain integrity and accountability throughout the supply chain. All work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 493190 designating the scope to warehousing and storage services specifically tailored for defense logistics. The contract is managed by the ASC Commodities Division under the Department of Defense, with proposals required to be submitted by August 7, 2026, following a July 28, 2026 posting date. The work is expected to be performed without a specified geographic location, and interested parties must respond through the official DIBBS portal referenced in the solicitation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract awards the manufacture and testing of 100 RF cable assemblies annually under strict military standards, requiring full lifecycle configuration control and comprehensive quality assurance processes to ensure consistent performance and traceability. All work must comply with applicable defense regulations and be performed with rigorous documentation to maintain integrity across production, testing, and delivery phases. The solicitation is set aside exclusively for small businesses as defined by the SBA, aligning with FAR 19.5, and falls under NAICS code 334417 for communications equipment manufacturing. The contract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 7, 2026, and was posted on July 28, 2026. Performance location details are not specified, and no point of contact is listed in the release. Subcontractors seeking to respond must demonstrate capability in high-reliability RF assembly, adherence to military specifications, and the ability to sustain quality control throughout the product’s lifecycle. All bids must be submitted through the designated DIBBS portal prior to the deadline.
Electronic Connector Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and SPRS Compliance SupportThis contract supports independent quality inspection, sampling, and SPRS compliance activities to ensure adherence to military standards and satisfy prime contractor evaluation criteria. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to bid, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued under the ASC Commodities Division of the Department of Defense. Performance location details are not specified, but the work is intended to support DOD procurement quality assurance objectives. The contract is structured as a subcontract, indicating it will be part of a larger prime contract ecosystem focused on supply chain compliance and inspection validation.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight HaulingThe contract is for the transportation of finished wiring harnesses from the manufacturer to various domestic military stock locations across the contiguous United States under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the seller’s facility. This is a small business set-aside subcontract classified under NAICS code 484220, which pertains to heavy and tractor-trailer truck transportation, ensuring eligibility is restricted to small businesses as defined by the SBA. The work is being procured by the ASC Commodities Division of the Department of Defense, and the solicitation is open for responses through August 7, 2026, with the opportunity posted publicly on the DIBBS platform. Performance will occur across multiple CONUS locations, requiring a carrier with the capacity to handle frequent, reliable shipments to geographically dispersed military stocking points.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract mandates the delivery of military-compliant packaging, preservation, and labeling services for finished wiring harnesses intended for extended storage and transport under demanding operational conditions. All work must adhere to strict defense standards ensuring the integrity, durability, and readiness of the assemblies, with specific requirements for corrosion inhibition, environmental protection, and secure containment to withstand extreme temperatures, humidity, and mechanical stress during military logistics cycles. The packaging and labeling must fully comply with applicable military specifications, including clear identification of part numbers, lot codes, handling instructions, and shelf life information to support traceability and field readiness. This is a total small business set-aside under the SBA program, restricted exclusively to businesses certified as small under NAICS code 493190, which covers warehousing and storage services. The opportunity is structured as a subcontract and is administered by the ASC Commodities Division under the Department of Defense. Bids must be submitted by the deadline of August 7, 2026, with no solicitation number provided. Performance location details are unspecified, but services are expected to support DoD supply chain requirements, with all work centered on ensuring long-term survivability and operational preparedness of wiring harnesses in austere environments.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335712
New
DIBBS
Cable and Wire Supply for Harness AssemblyThe contract solicits the supply of certified, traceable military-specification cables, wires, connectors, and insulation materials specifically for the production of wiring harnesses, ensuring strict compliance with defense-grade standards for reliability and performance. All materials must be fully traceable through documented lot numbers and quality control records to meet rigorous military requirements. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to compete, aligning with FAR 19.5 regulations. The NAICS code 335712 classifies this as a wiring and wiring device manufacturing contract, indicating the focus on specialized electrical components rather than general cable production. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, providing a ten-day window for submissions. The contracting activity is the ASC Commodities Division within the Department of Defense, and all performance is expected to adhere to federal defense supply chain protocols, though specific performance locations are not detailed. The procurement is accessible through the DIBBS platform, and bidders must ensure full compliance with military specifications, documentation requirements, and small business certification to qualify. No point of contact information is provided within the posting, suggesting all communication and submission must be handled through the designated federal procurement portal.

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Wiring Harness ManufacturingThe contract mandates the manufacture, testing, and delivery of fifty military-grade wiring harnesses designated by NSN 6150-01-119-4113, with strict adherence to established design specifications, material traceability, packaging protocols, and inspection requirements to ensure full compliance with defense standards. All units must meet rigorous quality and performance benchmarks expected for military applications, with documentation and certification required at every stage of production to guarantee accountability and readiness for field deployment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 335931, which corresponds to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued by the ASC Commodities Division under the Department of Defense. While specific performance location and point of contact details are not provided, the work is expected to align with defense logistics requirements, and all bids must be submitted through the designated DIBBS portal prior to the deadline.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 999999
New
DIBBS
Service UnavailableThe contract posting is currently unavailable due to system issues, preventing access to detailed prime contract information and related subcontract opportunities. The solicitation, identified under the number SPE4A626RXB88, was posted on July 28, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. The NAICS code 999999 indicates an undefined or placeholder classification, and no set-aside type, organizational details, or point of contact information has been provided. The place of performance and office address fields are unspecified, and no further administrative or operational details are accessible at this time. The official record can be viewed through the provided DIBBS link, though the system is currently unable to retrieve the underlying contract data.

POSTED

about 15 hours ago

DEADLINE

in 16 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Compliance & Cybersecurity SupportThe contract seeks ongoing cybersecurity compliance support to achieve and maintain CMMC Level 2 certification, focusing on system hardening, audit readiness, and full alignment with NIST SP 800-171 standards. The work involves implementing and managing technical and procedural controls to ensure continuous adherence to federal cybersecurity requirements, with an emphasis on preparing for third-party assessments and sustaining compliance over time. The contractor will be responsible for identifying gaps in current security postures, applying remediation measures, and documenting all control implementations to meet CMMC criteria. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 541512 for computer systems design services. The opportunity was posted on July 28, 2026, with responses due by August 7, 2026. While no specific location is designated for performance, the work is expected to be conducted remotely or at the contractor’s facility, supporting the DoD’s broader objective of securing its supply chain. The subcontract nature indicates the selected entity will provide services to a prime contractor or another subcontractor involved in DoD contractual obligations.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details