SETSCREW

The contract specifies the procurement of 30 units of a setscrew identified by NSN 5305000685282 and part number AN565F524H28, manufactured in accordance with NASM565 Revision 4 dated 02/29/2016. All threads classified as 3A and 3B must be inspected for dimensional conformance using System 22 of FED-STD-H28/20, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sampled lot unless otherwise stated, and unspecified attributes are treated as major with an AQL of 1.0. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is classified as a commercial item and must comply with any applicable military or consensus non-government standards, with previous revisions of the specification also acceptable for previously manufactured hardware. All packaging and marking must conform to MIL-STD-129 for shipping labels and MIL-STD-130N for bare item identification, including manufacturer’s logo, lot number, and material codes, with additional requirements from the DLA Master List of Technical and Quality Requirements taking precedence. Packaging must adhere to ASTM D3951, unless superseded by the DLA Master List. Palletization follows RP001, and the unit of issue is EA with a quantity per unit pack of 100. The item is to be delivered FOB origin to the designated location in New Cumberland, PA, with inspection and acceptance occurring at destination. The delivery timeline is 166 days from award, with a need ship date of November 1, 2026, and an original required delivery date of November 22, 2026. The contract mandates submission of a Certificate of Quality Compliance per QAP 13873 CDRL-COQC-26124, with data requirements governed by the DLA Master List, and technical compliance assessed against referenced standards including FED-STD-H28/20, MIL-STD-1916, and NAS