Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEWING MACHINE, INDUSTR

Active
SPE8E9-26-T-3148Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 25 industrial sewing machines with integrated table and drawer assemblies, each equipped with a completely assembled dual voltage motor rated at 110/220 volts, 60 hertz, single phase, conforming to OO-S-256/1B Type 301, Class 4, Style H. The units must be packaged per ASTM D 5118 with reinforced corners, one per heat-treated pallet, and marked “DO NOT STACK.” Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries or instruments, and any portable mercury-containing devices must include shockproof design and secondary containment in accordance with NAVSEA 5100-003D. The item, identified by NSN 3530-01-507-4081, is subject to technical and quality requirements referenced in the DLA Master List, and the contract is governed by DLA packaging standards. Delivery is required FOB origin within 40 days of award, with a final delivery deadline of January 9, 2027, and inspection and acceptance occur at destination. The contract is a total small business set-aside under NAICS code 333248, and the unit of issue is each. An extra manual must be sent to DLA Troop Support in Philadelphia, and all shipments must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.

General Info

Defense Logistics Agency seeks 25 sewing machines via solicitation SPE8E9-26-T-3148, responses due July 20, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE8E9-26-T-3148.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEWING MACHINE,INDUSTRIAL
SEWING MACHINE, INDUSTRIAL & TABLE/W DRAWER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
COMPLETELY ASSEMBLED DUAL VOLTAGE MOTOR (110/220 VOLTS, 60 HERTZ, 1
PHASE) AC IN ACCORDANCE WITH OO-S-256/1B TYPE 301, CLASS 4, STYLE H TYPE
I TABLE, MULTI-PLYWOOD CORE PACKAGING
REQUIREMENT: COMPLETE ASSEMBLED MOTOR STAND WITH BOXED SEWING HEAD
PLACED UNDER SHALL BE PACKAGED/ENCLOSED IN ACCORDANCE WITH ASTM D 5118
WITH 1.5" REINFORCED CORNERS. ONE COMPLETE ITEM PER HEAT TREATED PALLET.
MATERIAL TO BE MARKED: DO NOT STACK MANUALS INCLUDED ONE EXTRA MANUAL TO
BE SENT TO: DLA TROOP SUPPORT PHILADELPHIA ATTN: ANDRE OLDEN-FCDB, BLDG
3D 700 ROBBINS AVE PHILADELPHIA, PA 19111-5096
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC UNK OO-S-256/1B NOT 4 REVISION NR B DTD 11/19/2024 PART PIECE NUMBER: 301, CLASS 4, STYLE H
TDP Rev A Gen 1 IAW REFERENCE UNK OO-S-256K(1) REVISION NR K DTD 04/17/2023 PART PIECE NUMBER:
SPE8E9-26-T-3148
SECTION B
PR: 7017422741 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422741 0001 EA 25.000
NSN/MATERIAL:3530015074081
DELIVERY (IN DAYS):0040
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
2. COMPLETE ASSEMBLED ITEM TO BE PACKAGED/ENCLOSED IN ACCORDANCE WITH
ASTM D 5168; STYLE B OR C WITH REINFORCED CORNERS. ONE COMPLETE ITEM PER
HEAT TREATED PALLET. MATERIAL TO BE MARKED: DO NOT STACK
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE8E9-26-T-3148
SECTION B
PR: 7017422741 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/30/2026 Original Required Delivery Date:01/09/2027
SPE8E9-26-T-3148 NSN/Part Number: 3530-01-507-4081 Quantity: 25 EA Purchase Request: 7017422741QTY: 25 Delivery: 40 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
DIBBS
Supply of Special Industry Machinery (NSN J036V00007097)The contract pertains to the procurement and delivery of specialized industrial machinery units identified by the National Stock Number J036V00007097, with full compliance required under federal supply chain standards. The work involves order fulfillment to meet operational requirements, ensuring that all delivered equipment adheres to technical specifications and quality controls mandated by the Department of Defense. The contract is structured as a subcontract under the NAICS code 333248, which relates to other industrial machinery manufacturing, and is administered by the Defense Logistics Agency, reflecting its integration into the broader defense supply infrastructure. The contract was posted on July 20, 2026, and is associated with the award identifier SP700026P0012 through the DIBBS system, indicating its official recognition within federal contracting channels. While no specific place of performance or point of contact is provided, the nature of the procurement implies logistics coordination across designated defense installations. The absence of a solicitation number and set-aside designation suggests this subcontract was awarded through a direct or flow-down mechanism as part of a larger prime contract. All activities must align with the Defense Logistics Agency’s protocols for accountability, traceability, and timely delivery within the defense industrial base.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 333248
New
Federal
Available for Licensing: Continuous Electric-Field Assisted Sintering Technology for Scalable Continuous Material Production
Battelle Energy Alliance–doe Cntr

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333248
New
Federal
PROPULSION SHAFT
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333248
New
Federal
Brand Name Requirement for 22 IDEX 3D printers and associated accessories.
Niwc Pacific

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
Federal
BEP Part MAP5250 - Disk Counting GTS CountmasterThe U.S. Department of the Treasury, through the Office of the Chief Procurement Officer, is soliciting quotes for BEP part # MAP5250, a Disk, Counting-GTS COUNTMASTER with specifications G10100, KBA O/N SP36300-.L119.6/13V8, and GTS P/N .L119.6/13V8. This procurement is a total small business set-aside under FAR 19.5, restricted to businesses certified as small by the Small Business Administration, with the NAICS code 333248. All responses must be submitted electronically to Melva Robinson and Naweed Nezam at Treasury.gov by 2:00 PM Eastern Standard Time on Tuesday, July 28, 2026, and must include the vendor’s delivery lead time. Evaluation will be based on the lowest price among technically acceptable offers, and the government reserves the right to request a physical sample for approval prior to award. The place of performance is Washington, D.C., with all correspondence and submissions directed to the agency’s office at 20228.
Office Of The Chief Procurement Officer

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333248
New
DIBBS
Supply of Power-Operated Winch (Drum Type)The contract calls for the procurement and delivery of a single power-operated winch, identified by the National Stock Number 3950-01-568-9818, designed as a drum-type winch and required to meet all applicable military and federal logistics standards. The winch must be fully compliant with the technical and quality specifications demanded by federal supply systems to ensure compatibility with existing military equipment and maintenance protocols. The contract is structured as a subcontract under the NAICS code 333248, which corresponds to the manufacturing of other commercial and service industry machinery, indicating the specialized nature of the equipment being sourced. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the place of performance is designated as Bremerton, Washington, with a postal code of 98314-5001. The contracting entity falls under the Department of Defense, specifically the organization named Construction & Equipment Manu & Con, signaling the item's intended use within defense-related infrastructure or vehicle systems. While no specific point of contact or set-aside details are provided, the procurement is managed through the DIBBS system, indicating adherence to standardized Department of Defense acquisition procedures and transparency protocols for subcontractors participating in federal supply chains.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
DIBBS
RATCHETThis contract, identified as RATCHET under solicitation SPE8EE-26-T-2118, requires the delivery of one unit of NSN 3950-01-544-2793, a ratchet, to be furnished in strict compliance with DLA packaging and handling standards. The item must be delivered within 20 days of contract award, FOB origin, with zero variance in quantity, and is subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E with code U, marking per MIL-STD-129, and palletization governed by DLA’s packaging requirements. The shipment is designated for USS MAHAN DDG 72, FPO AE 09578, and must be dispatched via the fastest traceable means—parcel post is prohibited. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon system sensors, with any approved mercury-containing items requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is EA, priced at $1.00 for a total value of $1.00, and the contract includes special handling instructions for DLA vendors, including use of VSM, RDD 777, and TCN V219466175CA05. The original required delivery date is July 15, 2026, with a solicitation response deadline of July 30, 2026, and the contract is governed under NAICS code 333248 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
DIBBS
WINCH, DRUM, POWER OPThe contract specifies the procurement of one unit of a power-operated winch and drum identified by NSN 3950-01-568-9818 under Purchase Request 7017523016, with a delivery requirement of 20 days ADO. The solicitation number is SPE8EE-26-T-2119, issued on July 19, 2026, with responses due by July 30, 2026. The NAICS code 333248 identifies the category as other engine equipment manufacturing, and the contract is under the purview of the Department of Defense, with performance designated at Bremerton, Washington, 98314-5001. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on the acquisition size. The contract also invokes DLA Packaging Requirements for Procurement and the potential applicability of Covered Defense Information. Government identification must be removed from non-accepted supplies per RQ011. Primary point of contact is Philip Ferrara, reachable via email and phone listed, and all documentation and submissions must follow the DIBBS portal linked in the contract data.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333248
New
Federal
2-Head Embroidery MachineA commercial-grade 2-Head Embroidery Machine is being procured to support the NTC Sewing Shop in producing military nameplates, unit patches, and other required insignia for service members’ ODU uniforms. The machine must feature two sewing heads, each with 15 needles, and be built on a heavy-duty steel frame weighing approximately 1168 lbs to ensure durability under continuous use. It must achieve a maximum sewing speed of 1,100 stitches per minute for flat fabrics and 1,000 stitches per minute for caps, utilizing a positive needle drive system suitable for thick, layered materials. The embroidery area must be at least 450mm x 520mm, and the system must include a minimum 10.4-inch LCD touch screen with LAN and USB connectivity for seamless file transfer and operation. Essential capabilities include a quick-change cap system, integrated laser pointer for precise tracing, automatic hoop centering, and a dedicated function for creating military nametapes to meet specific service standards. The solicitation is a total small business set-aside under NAICS code 333248, managed by the Department of Defense at Fort Irwin, California, with responses due by July 30, 2026. Offerors are directed to review Attachment 1 for full physical, functional, and performance salient characteristics, as well as warranty and delivery terms, and must submit quotes through the designated portal.
W6QM Micc-Ft Irwin

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
DIBBS
BAG, MEDICAL INSTRUMENTThe contract specifies the procurement of a single Olive Drab Green Mini Medic Compact Trauma Aid medical bag, identified by NSN 6545-01-722-6568 and part number 244817 from McKesson Medical-Surgical. The bag is designed with external MOLLE-compatible pouches on the sides and bottom, an expansion zipper, and a large rear pouch with a drop-down feature. Internally, it includes two small and one large clear tear-away pouches in the main compartment, two mesh inner pouches, and an internal pouch on the lid. The item is not regulated by the FDA and must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129; copies of this standard are available through DLA Troop Support. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using commercial methods with sealed unit containers and suitable shipping exterior containers to ensure safe delivery. Delivery is FOB destination within 20 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The shipment is destined to USS OKANE DDG 77 at FPO AP 96674 and must be shipped via traceable means using the RDD 777 code, excluding parcel post. The contract was solicited under SPE2DS-26-T-242A with a response deadline of July 22, 2026, and the required delivery date is July 20, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 333248
New
Federal
DLA Disposition Services Okinawa Brass ShredderThe solicitation SP4510-26-Q-1032 for a Brass Shredder to be delivered to DLA Disposition Services in Okinawa, Japan, is a combined synopsis and solicitation issued under FAR Part 12 for commercial items, with full and open competition under NAICS code 333248. Offers must be submitted via email to june.lee@dla.mil no later than 3:00 p.m. Eastern Standard Time on July 24, 2026, and must be complete, submitted in U.S. Dollars, and include detailed technical specifications, delivery lead-time, and the place of manufacture for the equipment. Items must be manufactured in the United States or a Trade Agreement Act-compliant country; products originating from restricted nations such as China are ineligible for award. The requirement is for a single Brass Shredder capable of processing medium-caliber cartridge cases and other metallic and plastic debris, operating eight hours daily without clogging, with specific technical parameters including a 10mm cutting thickness, 2 to 4 cubic yard discharge hopper, voltage compatibility from 120/208 to 277/480, and full compliance with DoD requirements including IUID marking per DFARS 252.211-7003. The equipment must be delivered to BDLG 600 Camp Kinser, Okinawa, Japan, within six months of receiving a Delivery Order and fully operational within ten days of delivery, with the contractor responsible for unloading, assembly if needed, and coordination with the site manager. Performance must adhere to safety standards and all applicable federal, state, and local regulations, including compliance with DFARS 252.247-7023 for sea transportation and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Invoicing will be conducted monthly via the DoD Wide Area Workflow system under 252.232-7003, and payment will be made by electronic funds transfer. Failure to meet any pass/fail gate—technical acceptability, origin compliance, delivery timing, or completeness—will result in disqualification. The award will follow the lowest priced technically acceptable methodology, and no notification will be provided to unsuccessful offerors; all award information will be published on SAM.gov. The contractor is also responsible for spill reporting and cleanup, certification of compliance with anti-trafficking
DLA Disposition Services - Ebs

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 333248
New
International
Large Slurry MixerThe National Research Council of Canada is seeking a large slurry mixer designed for the preparation of viscous battery slurries to enhance the functionality and efficiency of its Clean Energy Innovation Research Center prototyping line. The procurement, identified by solicitation number 26-58093, is restricted to Canadian suppliers and suppliers from applicable trading partners under the Policy on Reciprocal Procurement, with offers from non-trading partners automatically rejected. The mixer must meet stringent technical specifications, including a maximum footprint of 2000 kg, dimensions not exceeding 3000 mm in depth, 2000 mm in width, and 3000 mm in height; it must be a stand-alone floor-installed machine operable by a single person and equipped with an automated temperature control system capable of 5000 kCal/h or greater at 10°C, with real-time temperature display on a control panel. The contract requires the delivery of a single unit along with complete operational documentation in both English and French, delivered as hard and soft copies on a USB key, and includes mandatory milestones: final design and drawings must be submitted and approved within two months of award, followed by a successful Factory Acceptance Test at five months post-award, delivery of the mixer by eight months, installation within 30 days of delivery, and a final Site Acceptance Test. The contractor must also provide comprehensive training and submit a service report with test results after installation. The contract is structured as a fixed-price agreement with payment tied to performance milestones—15% for design approval, 15% for FAT completion, 45% for delivery of the mixer, 10% for installation, 10% for SAT approval, and 5% for training. Customs duties are excluded, and applicable taxes are extra; payments are made within 30 days of receiving a compliant invoice submitted exclusively via email to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca, with 15% withholding for non-resident contractors unless a valid Canada Revenue Agency waiver is provided. Compliance with Canadian procurement ethics, conflict of interest policies, and the Code of Conduct for Procurement is mandatory, and contractors must not have any disqualifying circumstances identified under the Ineligibility and Suspension Policy. The contractor is responsible for ensuring environmental compatibility, including adherence to environmentally preferable packaging standards and potential demonstration of commitments to net-zero targets by 2050 through recognized frameworks such as the United Nations Race
National Research Council of Canada

POSTED

5 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details