Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHAFT, AXLE, AUTOMOTI

Awarded
SPE7L1-26-T-684YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency has awarded a contract to SECO PARTS & EQUIPMENT CO with CAGE code 1JUW8 for the supply of a shaft, axle, automotive part identified by NSN 2520012894288, with a total contract value of $4,851.32. The award was made under solicitation SPE7L1-26-T-684Y and officially posted on July 17, 2026, with performance expected to be fulfilled under federal procurement guidelines. The contract is a direct award with no set-aside classification specified and is managed by the Department of Defense through the DLA, with no designated place of performance details provided beyond the U.S. country designation. Kristina Derry of the Defense Logistics Agency serves as the primary point of contact, reachable via phone at 6146920158 or email at kristina.derry@dla.mil. The contract is formally recorded in the DIBBS system under award number SPE7M126V051B and is intended to support military logistics requirements through the acquisition of a single line item. Though no NAICS code, set-aside type, or detailed delivery location is listed, the award reflects routine procurement activity under standard DLA contracting procedures for essential automotive components used in defense equipment maintenance and operations.

General Info

DLA awarded SECO PARTS $4,851.32 for automotive shaft NSN 2520012894288 under solicitation SPE7L1-26-T-684Y.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$4,851.32

NAICS

336350 - Motor Vehicle Transmission and Power Train Parts ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SECO PARTS & EQUIPMENT COView Profile

Award Issued Date

Documents

(2)

Delivery Order SPE7M1-26-V-051B for Supplies

PDF•delivery-order

Request for Quotations SPE7L1-26-T-684Y

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DLA award SPE7M126V051B posted on DIBBS. Awardee: SECO PARTS & EQUIPMENT CO (CAGE 1JUW8) Total Contract Price: $4,851.32 Award Date: 07-17-2026 Solicitation: SPE7L1-26-T-684Y Line items: - SHAFT, AXLE, AUTOMOTI (NSN/Part 2520012894288, PR 7017092751)

Similar Contracts

Same NAICS industry code

NAICS: 336350
New
DIBBS
Control Assembly, Transmission Manufacturing and SupplyThe contract is for the manufacture and supply of approximately 47 units of a Control Assembly, Transmission, identified by NSN 2520-21-906-3932, with a guaranteed minimum order of 7 units, issued under an Indefinite Delivery Contract intended for vehicle system applications. This procurement is structured as a subcontract and is fully set aside for small businesses under the Small Business Administration’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring only small business concerns are eligible to compete. The NAICS code 336350 applies, categorizing the work within the motor vehicle electrical and electronic equipment manufacturing sector. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. While specific performance location and point of contact details are not provided, the contract is accessible via the DIBBS platform under solicitation number SPE7L326U0678. The indefinite delivery nature allows for multiple orders over the contract period, with quantities determined as needs arise, subject to the minimum guaranteed units and the overall approximate ceiling of 47 units.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
CONTROL ASSEMBLY, TRANS
Solicitation # SPE7L3-26-U-0678
This contract, issued under solicitation number SPE7L3-26-U-0678 by the Department of Defense through DLA Land and Maritime, Land Supplier Operations Vehicle Support, is a Small Business Set-Aside for the procurement of a CONTROL ASSEMBLY, TRANSMISSION with NSN 2520219063932. The item is designated as a Critical Application Item and is sourced from two approved suppliers: General Dynamics Land Systems Canada with part number 10503603 and Orscheln Products L.L.C. with part number 55378. The estimated annual quantity is 47 units at a unit price of $47.00, with a contract maximum value of $350,000.00 and a guaranteed minimum order of 7 units. Delivery is required within 81 days after the date of order, under FOB Origin terms, with inspection and acceptance occurring at the destination. The contract is structured as an Indefinite Delivery Contract with a one-year performance period, and all payments must be processed electronically through the Wide Area Workflow system using invoices and receiving reports for fixed-price line items. Packaging and labeling must strictly adhere to DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous materials and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging must be palletized according to RP001 and labeled per MIL-STD-129, with hazardous items additionally requiring compliance with the OSHA Hazard Communication Standard (29 CFR 1910.1200). Numerous DFARS clauses apply, including cybersecurity safeguards (252.204-7012), prohibitions on hexavalent chromium and covered defense telecommunications equipment, whistleblower protections, and restrictions on arbitration agreements. The solicitation mandates representation of small business status and compliance with all applicable federal regulations, including export controls and prohibitions on procurement from Communist Chinese military companies. Proposals must be submitted by the deadline of August 25, 2026, with offerors required to complete all applicable provision blocks or reference them by identifier, and no costs associated with proposal preparation will be reimbursed by the Government.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
RING, HUB DRIVE
Solicitation # SPE7L4-26-T-6233
The contract is for the procurement of RING, HUB DRIVE with NSN 2530219064058 and part number 10513411, issued under solicitation SPE7L4-26-T-6233 by the Department of Defense through DLA. The total quantity required is 293 units, divided into three line items of 43, 93, and 157 units respectively, each priced at a fixed unit cost of $1.00, resulting in a total contract value of $293.00. Delivery is required within 88 days from the need ship dates, which vary per line item between April and September 2026, with an original required delivery date of March 27, 2027. All items must be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must follow MIL-STD-129 labeling and RP001 palletization standards. Hazardous material must be packaged per IP025, while non-hazardous items require commercial packaging consistent with FED-STD-313. The product is designated as a critical application item and must be delivered to designated DLA distribution centers in New Cumberland, PA; Barstow, CA; and Albany, GA. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and the item falls under NAICS code 336350 for defense vehicle and armament manufacturing.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
DRIVE SHAFT ASSEMBLY, C
Solicitation # SPE7LX-26-U-9465
This contract specifies the procurement of a constant velocity drive shaft assembly, outer halfshaft, identified by NSN 2520-01-474-5707 and part number 10237284 from WalterScheid Inc, with a total quantity of 86 units at a unit price of $86.00. Delivery is required within 95 days FOB origin under solicitation SPE7LX-26-U-9465, with no variance allowed in quantity. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. Packaging, marking, and shipping must adhere to DLA’s RP001 packaging standards and MIL-STD-129 labeling requirements; hazardous materials must follow IP025 guidelines per FED-STD-313, while non-hazardous items must meet ASTM D3951 unless overridden by DLA requirements. Ozone-depleting chemicals are strictly prohibited, and any substitutes require prior approval. Inspection and acceptance occur at the destination, and all packaging must be palletized according to DLA specifications. The unit of issue is each (EA), and the contract is issued under DLA Direct, CONUS coverage.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
RING, CENTERING
Solicitation # SPE7LX-26-U-9519
The contract pertains to the procurement of RING, CENTERING with NSN 2520-21-878-7129 and part numbers 10513410 and 2401-8210.09, supplied by GENERAL DYNAMICS LAND SYSTEMS CANADA and GENERAL DYNAMICS EUROPEAN LAND SYSTEMS. The quantity ordered is 243 units at a unit price of $0.00, with a total contract value based on estimated quantity that may not be fully purchased by the IDC. Delivery is required within 81 days FOB origin, with no tolerance for quantity variance—plus or minus zero percent. Inspection and acceptance occur at the destination. Packaging must comply with DLA's Master List of Technical and Quality Requirements, and if the item is non-hazardous, it must be commercially packaged per ASTM D3951, with DLA requirements taking precedence. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. If hazardous under FED-STD-313, packaging must meet TQ requirement IP025. The unit of issue is each, with a QUP of 001. The solicitation number is SPE7LX-26-U-9519, issued under NAICS code 336350 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
CLUTCH ASSEMBLY, FRICTI
Solicitation # SPE7L1-26-T-949C
The contract solicitation SPE7L1-26-T-949C is for the procurement of 80 units of a CLUTCH ASSEMBLY, FRICTION, with a specific component list including a shaft, key, clutch, spacer, shims, bearings, washer, nut, adapter, and screw, each identified by precise part numbers. The assembly must be manufactured using a forging process and is subject to strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; any substitute chemicals require prior approval. Full and open competition applies, but the solicitation is a total small business set-aside under FAR 19.5, and only offerors representing as small businesses are eligible to compete. Offers using additive manufacturing are disqualified and ineligible for award, and all suppliers must comply with the First Article Test requirement, testing three units in accordance with FAR 52.209-3 Alternate I. Inspection and acceptance are mandated at origin under FAR 52.246-2, and the manufacturer’s quality system must meet at minimum SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129 with ZZ-ZZ special requirements, and the Special Packaging Instruction AM11636149 Revision D, while hazardous materials shipping adheres to IP025 guidelines. Technical data associated with the item is controlled under ITAR or EAR, and access is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completion of required training, and DLA authorization. Delivery is FOB origin to the DDSP New Cumberland Facility in Pennsylvania with a 284-day delivery schedule, and invoicing must be processed through WAWF. The contract requires representation of small business socioeconomic status, compliance with DFARS safeguards for covered defense information, and adherence to Buy America provisions. All submissions must be made via DIBBS by August 21, 2026, and contractors must register in DLA’s AMPS system within two months to maintain eligibility for future shipments and system access.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
PROPELLER SHAFT WITH U
Solicitation # SPE7LX-26-U-9500
The contract pertains to the procurement of a propeller shaft with a universal joint for vehicular use, identified by part number 16XNS934D143 and NSN 2520-01-545-0395, supplied by Meritor Heavy Vehicle Systems, LLC. It is classified as a critical application item under DLA Direct, CONUS coverage, with a quantity of 48 units at a unit price of $0 and a total price of $0, though the quantity is estimated and not guaranteed for purchase by the IDC. Delivery is required within 81 days under FOB origin terms with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List technical and quality requirements, specifically IP025, and adhere to MIL-STD-129 for marking and labeling; if non-hazardous, commercial packaging per ASTM D3951 is permitted only if it does not conflict with higher-priority DLA requirements. Palletization must follow DLA Packaging Requirements for Procurement. The solicitation, identified as SPE7LX-26-U-9500, was issued on August 10, 2026, with a response deadline of August 25, 2026, and is set aside entirely for small businesses under NAICS code 336350. The contracting authority is the Department of Defense’s Strategic Acquisition Program Directorate, with primary point of contact Theodore Misiolek. The unit of issue is each (EA), and all packaging data must reflect the specified Quantity per Unit Pack (QUP) of 001. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, superseding any other standards, and failure to meet these specifications may result in rejection of the supply. Delivery must be fully compliant with all DLA packaging, marking, and labeling directives as stipulated in the document.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
Federal
Cover Transmission
Solicitation # SPRDL126R0148
This contract action is a presolicitation for a 100% small business set aside under the SBA program, targeting competitive proposals for the supply of Cover Transmission with NSN 2520-01-073-7693 and part number 12267837/19207. The procurement is classified under NAICS code 336350 and is being managed by the Department of Defense through DLA Land Warren in Warren, Michigan. The solicitation number is SPRDL126R0148, with responses due by August 25, 2026 at 5:00 PM Eastern Time, and the opportunity was posted on August 10, 2026. Delivery is FOB destination with inspection at the origin point, and packaging must comply with Military B standards. The contract includes a 100% option, indicating potential for follow-on orders, and all work is to be performed by a qualified small business. Primary point of contact for inquiries is Angela Saunders, reachable via email or phone provided.
DLA Land Warren

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
Supply of Differential, Drivin (NSN 2520015763048)
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The Disk Assembly is a critical defense component requiring precision forging and welding, manufactured in accordance withDrawing 10861595 and related technical specifications, including Welding Procedure Specifications per Drawing 12479550, which mandates preproduction submission of welding methods. All manufacturing must occur using CNC machinery or industry-standard inspection equipment that meets or exceeds U.S. Army gage accuracy, and the use of Class I ozone-depleting chemicals is strictly prohibited. Final inspection and acceptance are conducted at the contractor’s manufacturing facility, where technical data, drawings, and quality records must be available for review; count, kind, and condition inspections are not acceptable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-2073-1E and RP001, using preservation method 33 and material 49, with marking conforming to MIL-STD-129 and utilizing a U pack code, no special marking, and palletization as required. Items are shipped FOB origin to the delivery address in New Cumberland, Pennsylvania, with a required delivery date of January 11, 2027, and a 143-day ADO timeline. The contract calls for 58 units at a unit price of $58.000, totaling $3,364.00, under solicitation SPE7L1-26-T-945B, which is a Women-Owned Small Business set-aside utilizing NAICS code 336350. The contract incorporates extensive quality and cybersecurity requirements, including compliance with NIST SP 800-171, safeguarding covered defense information, and reporting cyber incidents per DFARS 252.204-7012. Technical Data Packages, Quality Assurance Plans, and material safety data sheets must be submitted and maintained, and the contractor must ensure all materials and processes align with the DLA Master List of Technical and Quality Requirements. Ocean shipments require U.S.-flag vessels unless a waiver is obtained, and invoicing must be processed via Wide Area Workflow using approved formats. The contract mandates adherence to all applicable FAR and DFARS clauses, including provisions on small business representation, employee verification, trafficking in persons, and subcontractor management, with
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336350
New
DIBBS
DIFFERENTIAL, DRIVIN
Solicitation # SPE7L1-26-U-0558
This contract, issued under solicitation number SPE7L1-26-U-0558 by the Defense Logistics Agency’s Land and Maritime Land Supply Chain, is a total small business set-aside for the procurement of one differential, drivin with NSN 2520015763048, as identified by part number TDA A4 3200K2117. The requirement is for a single unit, with an estimated contract value of up to $350,000 and a guaranteed minimum quantity of one unit. Delivery must occur within 81 days after receipt of order, under FOB Origin terms, with all supplies destined for locations within the continental United States. Inspection and acceptance occur at the destination, governed by FAR 52.246-1, and all packaging must comply with DLA’s RP001 packaging requirements and MIL-STD-129 marking standards. The material, if not classified as hazardous under FED-STD-313, must be commercially packaged according to ASTM D3951, but all DLA Technical and Quality Master List requirements take precedence over ASTM D3951. If the item is hazardous, packaging must meet TQ requirement IP025, and the contractor must provide a Safety Data Sheet compliant with 29 CFR 1910.1200 prior to award. All packaging must be labeled in accordance with the Hazard Communication Standard and MIL-STD-129, with unit of issue and quantity per unit pack as specified in the contract. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses addressing cybersecurity, subcontracting, whistleblower rights, payment procedures, export controls, prohibitions on certain materials and equipment, and compliance with the Buy American Act and Berry Amendment. Offerors must be registered in the System for Award Management and represent their small business status as defined by NAICS code 336350. Quotes must be submitted via the DIBBS portal by August 24, 2026, and all contractors are required to comply with electronic invoicing through WAWF. Award will be made based on price and other factors, with the most advantageous offer selected for the government.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
Small Business Subcontracting ParticipationOshkosh Defense is committed to fostering subcontracting opportunities for small, disadvantaged, and women-owned businesses within the manufacturing, packaging, and logistics sectors under its subcontracting plan. These opportunities are part of a broader effort to promote equitable participation in defense-related supply chains, aligning with federal initiatives to support underserved business communities. The contract falls under NAICS code 336350, which encompasses the manufacturing of military vehicles and related defense equipment, indicating that subcontractors will be engaged in critical production and support activities for the Department of Defense. The subcontracting program is administered through the Defense Logistics Agency and is tied to the existing contract SPE7LX26FB4Y6, with performance expected to occur across various locations supporting defense logistics needs. While specific geographic details are not provided, the contract emphasizes broad national participation and accessibility for qualified small businesses regardless of location. The initiative aims to strengthen supplier diversity by integrating these businesses into the end-to-end process of producing and delivering defense equipment, from component manufacturing to packaging and logistical distribution, ensuring sustained economic growth and resilient supply networks.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 484220
New
DIBBS
International Logistics & Fuel Transport Services
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541380
New
DIBBS
Fuel Quality Testing & Regulatory Compliance Services
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CUI Handling Support
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 424720
New
DIBBS
Unleaded Gasoline Supply (International Delivery)
Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 424720
New
DIBBS
Diesel Fuel Supply (International Delivery)
Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Compliance & Packaging Services
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335912
New
DIBBS
Storage Battery Supply (Hazardous Material Compliant)
Primary Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting Plan Compliance & Reporting
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 484220
New
DIBBS
Logistics and Freight Transportation (Destination Delivery)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Sealing Compound Manufacturing and Supply
Adhesive Manufacturing

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541611
New
DIBBS
Subcontractor Flow-Down Compliance ManagementThe contract requires strict adherence to Defense Federal Acquisition Regulation Supplement (DFARS) cybersecurity standards and prohibitions on telecommunications equipment from specified vendors, ensuring all subcontractors meet federal defense data protection mandates. Subcontractors must implement appropriate security controls to safeguard controlled unclassified information and avoid using telecommunications services or equipment from entities deemed a national security risk. Compliance is not optional and must be actively monitored and documented throughout the performance of the subcontract. All subcontractors are obligated to maintain comprehensive records demonstrating ongoing compliance with DFARS clauses, including cybersecurity posture, vendor vetting, and incident reporting protocols. These records must be readily available for audit or inspection by the Defense Logistics Agency or other designated government entities. The requirement applies across all tiers of the subcontracting chain and is tied to the performance of work under the prime contract, with failure to comply potentially leading to termination, financial liability, or exclusion from future contract opportunities.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

N/A
View Details