Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHAFT, AXLE, AUTOMOTIVE

Active
SPE7L1-26-T-04B5Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of two automotive axle shafts, identified as Ford Motor Company part number EC3Z-3219-D and NSN 2520-01-698-8136. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is February 8, 2027, with a delivery window of 152 days. The agreement mandates strict adherence to environmental and quality standards, specifically prohibiting the use of Class I ozone-depleting chemicals. Packaging, marking, and shipping must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the shipping terms are FOB Origin with no allowed quantity variance.

General Info

Procure two Ford axle shafts for delivery to Pennsylvania by February 8, 2027.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-04B5 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
CRAIG KING
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,AXLE,AUTOMOTIVE
SHAFT,AXLE,AUTOMOTIVE
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
FORD MOTOR COMPANY 1NVV8 P/N EC3Z-3219-D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018069030 0001 EA 2.000
NSN/MATERIAL:2520016988136
DELIVERY (IN DAYS):0152
SPE7L1-26-T-04B5
SECTION B
PR: 7018069030 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/08/2027 Original Required Delivery Date:02/08/2027
SPE7L1-26-T-04B5 NSN/Part Number: 2520-01-698-8136 Quantity: 2 EA Purchase Request: 7018069030QTY: 2 Delivery: 152 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
LINK, DETACHABLE LIN
Solicitation # SPE7L4-26-T-6330
Solicitation SPE7L4-26-T-6330 is a fixed-price request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of three detachable links, identified by NSN 3020-01-431-7435. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 19, 2026. Delivery is FOB destination to the USNS Sisler in FPO AE 09587, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific requirements include the removal of government identification from non-accepted supplies and a prohibition on the intentional addition of mercury or mercury-containing compounds. Offerors must comply with the Buy American Act, the Berry Amendment, and domestic material restrictions. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by August 27, 2026. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
ROD, PISTON, LINEAR A
Solicitation # SPE7M1-26-T-7980
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of six linear actuating cylinder piston rods used on compressors, identified by NSN 3040-01-140-6233. The contract requires delivery within 168 days after the order is received and specifies performance in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards. It explicitly prohibits the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, with limited exceptions for specific functional components like batteries or sensors. All substitute chemicals must be submitted for approval unless already authorized by specification requirements.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
SPROCKET WHEEL
Solicitation # SPE7L4-26-T-4874
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
PIVOT SHAFT ASSEMBL
Solicitation # SPE7L3-26-T-167X
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one Pivot Shaft Assembly (NSN 3040-01-719-0169) under solicitation number SPE7L3-26-T-167X. The contract requires delivery within 20 days after receipt of order and is managed under NAICS code 333613, with the place of performance located in Mechanicsburg, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
PARTS KIT, LINEAR AC
Solicitation # SPE7L1-26-T-972N
Solicitation SPE7L1-26-T-972N is a request for quotations issued by the Defense Logistics Agency (DLA) Land and Maritime for the procurement of 55 units of a Linear Actuating Cylinder Assembly parts kit, identified by NSN 3040-00-906-0147. The supplies are intended for delivery to the GHQ Jordan Armed Forces in Amman, Jordan, with a required delivery date of August 19, 2026, and a delivery lead time of 20 days. The contract terms are FOB Origin, with both inspection and acceptance occurring at the origin. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1 Appendix D for kits, MIL-STD-129 for marking, and RP001 for palletization. Technical compliance is based on TDP Rev A Gen 1 and Basic Drawing 19207 5703405 Revision C. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment restrictions, and cybersecurity requirements under DFARS 252.204-7012. Quotations were due by August 27, 2026, via the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L4-26-T-6278
This contract is a solicitation for the procurement of one spur gear, identified by NSN 3020-01-365-9217 and associated with Parker-Hannifin Corporation part numbers 1805-1285 and N2139. The item is designated as a critical application item and must be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of July 30, 2027. The delivery timeline is set at 339 days, and the terms specify FOB Origin with inspection and acceptance occurring at the destination. The procurement is subject to specific technical and quality requirements, including DLA packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. This solicitation, numbered SPE7L4-26-T-6278, is issued by the Department of Defense under the agency LSO Combat Vehicles and Armament.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M1-26-U-5136
Solicitation SPE7M1-26-U-5136, issued by the DLA Land and Maritime Maritime Supply Chain, is a request for the procurement of 1,041 sensitive switches, identified by NSN 5930006464619 and part number MS25085-1. This requirement is designated as a critical application item and must comply with the Qualified Products List or Qualified Manufacturers List, specifically adhering to specifications MIL-PRF-8805/2M and MIL-PRF-8805K. The procurement may result in a one-year Indefinite Delivery Contract below the Simplified Acquisition Threshold, with a delivery timeframe of 84 days FOB Origin. The contract mandates strict adherence to environmental and quality standards, including the prohibition of intentionally added mercury and Class I ozone-depleting substances. Packaging and marking must follow ASTM-D3951, MIL-STD-2073-1E, and MIL-STD-129, with hazardous materials requiring labeling per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Award will be made via a unilateral SIDC to a responsible offeror who submits a conforming quote through the DIBBS system by August 27, 2026. Invoicing and payment must be processed through the Wide Area Workflow system.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7LX-26-U-9557
This solicitation, issued by DLA Land and Maritime under number SPE7LX-26-U-9557, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to procure Shouldered Shafts (NSN 3040-00-200-1392). The contract is intended for a one-year period with a maximum value of $350,000 and an estimated annual quantity of 15 units. Deliveries are required FOB Origin within 151 days of an order, with both inspection and acceptance occurring at the destination. The procurement falls under NAICS code 333613, and the contract incorporates strict cybersecurity requirements, specifically the CMMC Level 2 Self-Assessment, and mandates the safeguarding of covered defense information. Contractors must adhere to rigorous technical and quality standards, including specific sampling methods such as MIL-STD-1916 or ASQ H1331 to ensure zero non-conformances in sample lots. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001), with specific instructions for preservation, cushioning, and palletization. Additionally, the contract is subject to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and requires compliance with hazardous material labeling standards. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
GEAR, ANTIBACKLASH, S
Solicitation # SPE7L1-26-T-04S1
This contract is for the procurement of one antibacklash spur gear, identified by NSN 3020001023691 and part number SMD604231-2. The item must be manufactured in accordance with several technical specifications, including basic drawing 80063 SM-D-604231 and various military standards such as MIL-S-7720A, MIL-PRF-8625F, and MIL-DTL-14072G. The contract prohibits the use of Class I ozone depleting chemicals and requires adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging, marking, and physical identification. Delivery is required within 20 days after the order, with a final required delivery date of May 4, 2026. The item is to be shipped FOB Origin to the IFRCO Warehouse in Huntsville, Alabama, using the fastest traceable means. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. Inspection and acceptance will take place at the destination.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
30--HOUSING PART,MECHANICA
Solicitation # SPE7L4-26-U-1167
Solicitation SPE7L4-26-U-1167, issued by the Department of Defense LSO Combat Vehicles and Armament, seeks quotes for the procurement of nine mechanical housing parts under NSN 3040015150845. This request for quotation may result in an Automated Indefinite Delivery Contract with a one year term or until the aggregate total of orders reaches 350,000.00. The contract includes a guaranteed minimum quantity of one item, with an estimated one order per year. Delivery is required within 127 days after receipt of the order, with shipments directed to various CONUS and OCONUS DLA Depots via consolidation and containerization points. The approved source for this procurement is 75Q65 3195201, and the solicitation falls under NAICS code 333613. All responsible sources may submit electronic quotes by the deadline of September 11, 2026. Specifications, plans, and drawings are not available for this request. The procurement is managed by the office located in Columbus, Ohio, and follows the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
30--GUIDE,PISTON ROD
Solicitation # SPE7LX-26-U-9832
The Department of Defense, through the Strategic Acquisition Program Directorate, is soliciting quotes under RFQ SPE7LX-26-U-9832 for the procurement of Piston Rod Guides, identified by NSN 3040015126706. This requirement is for 13 units with a delivery timeline of 127 days after the order is placed. The procurement may result in an Automated Indefinite Delivery Contract with a term of one year or until the aggregate total of orders reaches 350,000.00 dollars. The contract includes a guaranteed minimum quantity of one, with an estimated one order per year. Approved sources for this item are 87045 D-WK-835-14 and 87045 F-WK-835-1PC12. Items are to be shipped to various CONUS and OCONUS DLA Depots via consolidation and containerization points. All quotes must be submitted electronically by the deadline of September 11, 2026. This solicitation falls under NAICS code 333613 and is managed by the office located in Columbus, Ohio.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
Federal
ADAPTER,HOUSING
Solicitation # NO0014-26-Q-ND52
The contract pertains to the procurement of a Port Adapter, designated as Special Emphasis Material (Level I), for use in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or the vessel. The item must comply strictly with Vacco Drawing S3E10036 and SAE AMS-QQ-S-763, Class 304, Condition A, with mandatory chemical and mechanical analysis, intergranular corrosion testing prior to fabrication, and adherence to approved welding and brazing procedures per S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278. All welding procedures and personnel qualifications require prior government approval, and electronic submission of qualification data through Adobe Acrobat PDF is mandated. Traceability is strictly enforced from raw material through final assembly, requiring unique heat-lot markings on components and certification reports that must be matched and permanently traceable; any process altering material properties necessitates re-certification with a new traceability identifier. Quality assurance is governed by ISO-9001, ISO-10012, and ISO/IEC 17025, with mandatory government source inspection and surveillance by DCMA. Contractors must maintain comprehensive recordkeeping for all inspections, tests, and corrective actions, and submit 100% of test certifications, weld records, and material documentation via Wide Area WorkFlow (WAWF), specifically designated for review and acceptance at Portsmouth Naval Shipyard prior to shipment. Electronic signatures are valid provided they are uniquely controlled and authenticated. The contractor must ensure all sub-tier suppliers adhere to the same rigorous standards, including traceability, material control, and certification requirements. Packaging, preservation, and marking must conform to MIL-STD-2073. The requirement is classified under Emergency Acquisition Flexibilities and rated under the Defense Priorities and Allocations System (DPAS), with strict prohibitions against mercury contamination and unauthorized marking. Deliveries are conditioned on prior acceptance via WAWF submission to the designated government points, and no material may be shipped without explicit approval.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
STRAP ASSEMBLY
Solicitation # SPE7L1-26-T-974G
Solicitation SPE7L1-26-T-974G is a fixed-price request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of three strap assemblies, identified by NSN 5340-01-201-0897. The delivery is required within 20 days after receipt of the order, with the shipping destination located in Turkey. Inspection and acceptance are both designated at the point of origin. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking, with a specific prohibition on the use of mercury or mercury compounds in packaging. Technical data for this item is subject to export control under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Additionally, the procurement prohibits the use of additive manufacturing processes. Compliance with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and human trafficking is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-973U
Solicitation SPE7L1-26-T-973U is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of six units of spring tension clips under NSN 5340-01-212-1934. The requirement specifies a delivery timeline of five days after receipt of order, with shipping directed to a freight forwarder in Virginia for final delivery to the Egyptian Navy Armament Department in Alexandria, Egypt. The procurement is intended for automated simplified acquisition, with a price evaluation preference provided for HUBZone small business concerns. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Compliance with the Buy American Act and the Berry Amendment is required, and the contractor must utilize the Wide Area WorkFlow system for electronic invoicing and receiving reports. Inspection and acceptance are designated to occur at the point of origin.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-973E
Solicitation SPE7L1-26-T-973E is a request for quotations issued by DLA Land and Maritime for the procurement of 124 O-rings, identified as NSN 5331012199072. This is designated as a critical application item and is identified as a commercial product. Approved sources include Honeywell International Inc and Boeing Distribution Services X, Inc, both utilizing part number 2670890-8. The required delivery date is February 1, 2027, with a need ship date of January 20, 2027, and a delivery lead time of 145 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-129 for marking and RP001 for palletization. Due to the risk of ultraviolet deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Special marking code 20, indicating do not bend, is required. Quality assurance follows MIL-STD-1916 or ASQ H1331, with an acceptance threshold of zero non-conformances in the sample lot. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to Buy American and Berry Amendment restrictions. All quotes must be submitted via the DLA Internet Bid Board System.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L1-26-T-971J
Solicitation SPE7L1-26-T-971J is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of three V-belts, identified by NSN 3030000072323 and part number 3L660 from manufacturers MUVIQ USA, LLC or CONTITECH USA, INC. The requirement specifies a delivery window of five days after receipt of order, with an original required delivery date of August 13, 2026. Delivery is to be made to the Louisiana Army National Guard in Plaquemine, Louisiana, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001 for palletization, while all marking and labeling must follow MIL-STD-129. Offerors must submit quotes via the DLA Internet Bid Board System and comply with domestic sourcing regulations, including the Buy American Act and the Berry Amendment. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-930U
This contract is for the procurement of 18 O-rings under solicitation SPE7L1-26-T-930U for the Department of Defense Land Supply Chain. The items are identified by NSN 5331-01-580-6532 and correspond to part numbers D48372 REV C and 109-041RN from Union Flonetics and Hunt Valve Company. Delivery is required within 168 days, with a need ship date of February 2, 2027, and shipment is designated FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and quality requirements, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Prohibited materials include asbestos and the intentional addition of mercury or mercury-containing compounds. Inspection and acceptance will occur at the destination, and all marking and palletization must comply with MIL-STD-129 and RP001 standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-974Q
Solicitation SPE7L1-26-T-974Q is a request for quotations issued by the DLA Land and Maritime agency for the procurement of six spring tension clips, identified by NSN 5340-01-212-1934. The items must be produced according to technical drawing TDP Rev A Gen 1, specifically basic drawing 32770 048-80051-00. This is a small business set-aside procurement that may be eligible for automated award, with a price evaluation preference provided for HUBZone small business concerns. Delivery is required within five days after receipt of order, with terms set as FOB Origin. This is a Foreign Military Sales requirement for Egypt. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance are to take place at the point of origin. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates cybersecurity requirements, including CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333618
New
DIBBS
HOUSING, PUSHROD
Solicitation # SPE7L1-26-T-958P
Solicitation SPE7L1-26-T-958P is a request for quotations issued by the Department of Defense DLA Land and Maritime Land Supply Chain for the procurement of pushrod housings (NSN 2815013996358) used on Alco Diesel Engine Model 251C. The requirement consists of two line items, each for one unit, with a required delivery date of August 10, 2026, and a delivery lead time of 20 days after order release. Shipping is designated as FOB Origin, with delivery and acceptance points located at destination addresses for the USS Iwo Jima (LHD 7) and USS Kearsarge (LHD 3). The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except where functionally required and compliant with NAVSEA 5100-003D. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and submission of quotes through the DLA Internet Bid Board System (DIBBS) by August 24, 2026. The procurement is governed by various FAR and DFARS clauses, including those related to sustainable products, hazardous material identification, and prohibitions on covered defense telecommunications equipment.
Other Engine Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-975W
Solicitation SPE7L1-26-T-975W is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 21 turnbuckle bodies under NSN 5340-00-327-6114. The items are to be delivered FOB Origin to Hill AFB, Utah, with a required delivery date of November 1, 2026, and a delivery window of 76 days after award. This is a critical item requiring source inspection and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be approved by the DLA controlling authority to access the restricted data. The award process may be automated, with a price evaluation preference granted to certified HUBZone Small Business Concerns. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and must comply with CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-974W
Solicitation SPE7L1-26-T-974W is a request for quotations issued by DLA Land and Maritime for the procurement of seven mounting brackets, identified by NSN 5340-00-133-8101. The delivery is required within 201 days after the order, with a need ship date of March 17, 2027, and the place of performance is New Cumberland, Pennsylvania. The contract is established as FOB Origin, with both inspection and acceptance also occurring at the origin. The procurement is subject to strict quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. It incorporates specific DLA technical and quality requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012. HUBZone small businesses may be eligible for a price evaluation preference. Quotations must be submitted via DIBBS by August 27, 2026.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-972P
Solicitation SPE7L1-26-T-972P is a Request for Quotations issued by the Department of Defense DLA Land and Maritime Land Supply Chain for the procurement of 504 threaded spacing standoffs, also identified as extension studs, under NSN 5340-01-115-0810. The contract falls under NAICS code 332722 and requires delivery to DLA Distribution San Diego within 113 days, with a specified need ship date of December 19, 2026. Inspection and acceptance are to be conducted at the destination. The contractor must adhere to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards such as ASTM D3951 for non-hazardous materials and RP001 for palletization. All shipments must be marked and labeled according to MIL-STD-129. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
BASE, STAND
Solicitation # SPE7L1-26-U-0573
DLA Land and Maritime, specifically the Land Supply Chain, has issued Request for Quotations SPE7L1-26-U-0573 for an indefinite delivery contract to procure a Base, Stand (NSN 5340-01-383-3782). This solicitation is a Women-Owned Small Business set-aside with a contract maximum value of $350,000 and a one-year period of performance. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) no later than August 27, 2026. The procurement is for a single unit of issue, with an estimated delivery timeline of 116 days. All deliveries are to be made within the continental United States on an FOB Destination basis, with inspection and acceptance occurring at the destination. The contract incorporates rigorous technical and quality requirements, including adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over standard commercial packaging like ASTM D3951. Packaging and marking must comply with MIL-STD-129 and MIL-STD-130N, while palletization must follow RP001 standards. If the material is classified as hazardous under FED-STD-313, specific labeling in accordance with the Hazard Communication Standard is required. Additionally, the contract is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cybersecurity. Contractors are required to use Wide Area WorkFlow (WAWF) for all invoicing and receiving reports.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 313320
New
DIBBS
BACKING RING
Solicitation # SPE7L1-26-T-971K
Solicitation SPE7L1-26-T-971K is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of one backing ring, identified by NSN 5330004533055 and GE Aviation Systems part number 7-05040-400. The item is to be delivered to Training Air Wing TW2 in Kingsville, Texas, with an original required delivery date of August 13, 2026, and a delivery window of five days after order. The procurement is governed by NAICS code 313320 and requires submission of quotes via the DLA Internet Bid Board System. The contract mandates strict adherence to technical and quality standards, including the prohibition of asbestos per FED-STD-313 and compliance with MIL-STD-130N for identification marking. Packaging must follow MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, utilizing medium duty, waterproof, greaseproof, opaque bags to protect the item from ultraviolet rays. Marking must comply with MIL-STD-129. Inspection and acceptance will occur at the destination. Additionally, the contractor must utilize the Wide Area WorkFlow system for invoicing and comply with domestic material restrictions, including the Buy American Act and the Berry Amendment.
Fabric Coating Mills

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details