This Solicitation opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SHAFT HOLDING ASSEM
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract pertains to the procurement of one unit of a shaft holding assembly with part number 21C7746G02 and NSN 4920-01-250-2714, sourced from either General Electric Company or Rhinestahl Corporation. The item is to be delivered FOB origin within 227 days of the contract, with no variance allowed in quantity, and inspection and acceptance are to occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and unit containerization, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery address is designated as the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality standards referenced through R and I numbers from the DLA Master List, with sampling methods governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The contract enforces compliance with DLA’s measuring and test equipment standards, cybersecurity requirements including CMMC Level 2 self-assessment, and protection of covered defense information. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. The item has no shelf life limitation, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation SPE4A5-26-T-291B, with a response deadline of July 23, 2026, and a posted date of July 15, 2026. It falls under NAICS code 332710, is managed by the Department of Defense’s ASC Supplier Oper OEM Division, and is assigned to Hien-Van Trinh as the point of contact. Transportation instructions reference specific DLA procedural notes, and the unit of issue is each (EA), with the total price based on a single unit quantity.
General Info
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SHAFT HOLDING ASSEM
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
GENERAL ELECTRIC COMPANY 99207 P/N 21C7746G02
RHINESTAHL CORPORATION 5QE71 P/N 21C7746G02
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
SPE4A5-26-T-291B
SECTION B
PR: 7017039347 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017039347 0001 EA 1.000
NSN/MATERIAL:4920012502714
DELIVERY (IN DAYS):0227
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:02
WRAP MAT:GB CUSH/DUNN MAT:LK CUSH/DUNN THKNESS:Z
UNIT CONT:F3 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/08/2027 Original Required Delivery Date:03/08/2027
SPE4A5-26-T-291B
SECTION B
PR: 7017039347 PRLI: 0001 CONT’D
SPE4A5-26-T-291B NSN/Part Number: 4920-01-250-2714 Quantity: 1 EA Purchase Request: 7017039347QTY: 1 Delivery: 227 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS