SHAFT

SHAFT
SHAFT (CORROSION RESISTANT STEEL MATERIAL)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
"CONTRACTOR/MANUFACTURER IS REQUIRED TO
ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT
MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994,
AMERICAN NATIONAL STANDARD FOR CALIBRATION
CALIBRATION LABORATORIES AND MEASURING AND TEST
EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1,
QUALITY ASSURANCE REQUIREMENTS FOR MEASURING
EQUIPMENTPART 1, METROLOGICAL CONFIRMATION
SYSTEM FOR MEASURING EQUIPMENT."
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPE7L3-26-T-9107
SECTION B
SPECIFICATION REQUIREMENTS.
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
_____________EXCEPTION DATA_________________
APPROXIMATE DIMENSIONS; 3-3/4 INCH LENGTH<(>,<)>
5/8 INCH MAJOR O.D., 3/8 INCH MINOR O.D.<(>,<)>
EXCEPT; "USE MIL-STD-130 IN LIEU OF OSTD NO. 2;
USE MIL-S-853 CL. 7 (AISI303) IN LIEU OF 46S18".
E/I 5/38 MK 24 AND 25 TRAINING AND ELEVATING
GEAR.
____________END OF EXCEPTIONS_______________
THE ITEM BEING PROCURED IS A CRITICAL GUN PART
ITEM WITH UNIQUE REQUIREMENTS.
PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR
AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED
ON THIS CONTRACT. THE IDENTIFICATION OF THE
ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE
CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.
UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE
APPROVED BY THE PCO VIA FORMAL CONTRACT
MODIFICATION.
,,
PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE
WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE
REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE
INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE
CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED
DURING TESTING.
PRODUCT VERIFICATION TESTING, IF INVOKED,
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF
EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.
FIVE (5) PVT SAMPLES<(>,<)> UNLESS OTHERWISE
SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT
IN FOR TESTING.
IAW BASIC DRAWING NR 10001 193300
REVISION NR D DTD 02/16/1995
PART PIECE NUMBER: PIECE NO. 5
IAW REFERENCE STD NR MIL-STD-130N(1) NOT 1
REVISION NR N DTD 08/26/2019
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016461859 0001 EA 6.000
SPE7L3-26-T-9107
SECTION B
PR: 7016461859 PRLI: 0001 CONT’D
NSN/MATERIAL:1020001426316
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
MARKFOR
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
M/F: (TCN) W5872Y61040005
RDD: 555
PROJ: TP 2
SUPP ADD: WT5PV1 SIG: J
SPE7L3-26-T-9107
SECTION B
PR: 7016461859 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 04
DIC: A31 DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:04/21/2026
SPE7L3-26-T-9107 NSN/Part Number: 1020-00-142-6316 Quantity: 6 EA Purchase Request: 7016461859QTY: 6 Delivery: 10 days ADO