SHAFT, SHOULDERED
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of a shaft, shouldered part with NSN 3040-01-075-5640 and part number 777-3369-001, manufactured by Rockwell Collins, Inc., under solicitation SPE7L1-26-T-835R. A single unit is required to be delivered within five days of contract award, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. The item is not subject to shelf life restrictions and must not contain any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly permitted by specifications. Sampling and quality verification adhere to MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances for acceptance unless otherwise stated, with attribute levels assigned as specified. The delivery destination is the Parts-Attach General Depot in Tainan, Taiwan, with freight logistics governed by DLA procedures C19 and C20. All technical and quality standards referenced are controlled by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract was issued under a federal procurement framework with a primary point of contact at DLA, and the required delivery date was June 13, 2023, with no new ship date specified.
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
SHAFT,SHOULDERED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
ROCKWELL COLLINS, INC. 84T51 P/N 777-3369-001
SPE7L1-26-T-835R
SECTION B
PR: 7017498458 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017498458 0001 EA 1.000
NSN/MATERIAL:3040010755640
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DTW500
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
MARKFOR
DTW500
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
M/F: (TCN) DTW55V31403330
SPE7L1-26-T-835R
SECTION B
PR: 7017498458 PRLI: 0001 CONT’D
RDD: A01
PROJ: B32 TP 1
SUPP ADD: DA4KDV SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A31 DIST: N01 ADV: FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:06/13/2023
SPE7L1-26-T-835R NSN/Part Number: 3040-01-075-5640 Quantity: 1 EA Purchase Request: 7017498458QTY: 1 Delivery: 5 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → LAND SUPPLY CHAIN
Same awarding agency