This Award Notice opportunity from Department Of Defense was posted on October 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SHAFT, SHOULDERED

Awarded

SPE7LX-26-U-006EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

Pin Assemblies

Solicitation # pin-assemblies

Mercer Engineering Research Center is soliciting bids from qualified suppliers for the fabrication of precision ground pin assemblies. The required specifications for these components include diameters ranging from 0.155 to 3 inches and lengths between 3 and 10 inches. This opportunity is open to performance across all U.S. states. The solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must respond by November 13, 2026. Primary coordination for this project is handled by Michael Lange, and further details can be obtained through the designated point of contact.

Mercer Engineering Research Center

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-035Z

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-036L

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-030U

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-033L

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-033S

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fwd Closeout Frame Ring SupplyThis small business set-aside subcontract involves the fabrication and supply of four Forward Closeout Frame Rings for aerospace projects managed by the Naval Research Laboratory under the Department of Defense. The selected contractor must produce part number 5761-26-NRL26P-001 in strict accordance with drawing 5761-26-NRL26P-001 REV, utilizing precision machining or forming to ensure all controlled drawing specifications are met. Eligible bidders must be registered with the Joint Certification Program to participate. The performance of this contract is centered in Washington, DC, with a response deadline set for November 16, 2026. This opportunity is specifically categorized under NAICS code 332721 for specialized machining services.

Naval Research Laboratory

POSTED

DEADLINE

Radome Band Clamp SupplyThis small business set-aside subcontract involves the supply of six Radome Band Clamps for prime contractors supporting Naval Research Laboratory aerospace projects. The selected provider must fabricate part number 5763-26-LP-001 using precision machining or forming techniques to strictly adhere to the specifications outlined in drawing 5763-26-LP-001 REV. Eligible contractors are required to maintain registration with the Joint Certification Program to participate. The performance of this contract is centered in Washington, DC, under the oversight of the Department of Defense. Interested parties must submit their responses by November 16, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Solicitation # N00173-27-Q-1301424033

The Naval Research Laboratory is soliciting quotations for the procurement of specific hardware components for radome assemblies under solicitation N00173-27-Q-1301424033. This is a Total Small Business set-aside competitive procurement on a Firm-Fixed-Price basis. The required supplies include six Radome Band Clamps (Part 5763-26-LP-001) and four FWD Closeout Frame Rings (Part 5761-26-NRL26P-001), both of which must be manufactured according to controlled drawings. Due to the nature of these drawings, this opportunity is restricted exclusively to Joint Certification Program registered vendors. Interested offerors must be an Original Equipment Manufacturer, authorized dealer, distributor, or reseller to ensure OEM warranty and service are maintained. Submissions must include the vendor name, Cage Code, and JCP Certification Number, and must be sent via email to the designated points of contact. The government will utilize a Lowest Price Technically Acceptable evaluation method to award the contract to the responsible offeror. All equipment must be new, and FOB Destination is the preferred delivery method to the Naval Research Laboratory in Washington, DC.

Naval Research Laboratory

POSTED

DEADLINE

Manufacture and Supply of Straight Headless Pins (NSN 5315-01-656-4368)This subcontract involves the manufacture and supply of high-precision straight, headless pins under NSN 5315-01-656-4368 for the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of CNC equipment and metrology tools to perform precision machining and forming, with final delivery taking place at Tinker AFB. To qualify, the provider must maintain ISO 9001:2015 certification and FAA Airworthiness approval. All deliverables must comply with MIL-STD-129 and MIL-STD-2073-1E standards and be accompanied by full traceability records and airworthiness documentation. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Flat Washer Manufacturing & SupplyThis subcontract involves the precision manufacturing and supply of 4,096 flat washers, specifically part NAS1149V0332M, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The hardware is designated for critical applications and must be produced in strict accordance with the NAS1149 part standard, with a specific prohibition against the use of additive manufacturing. Performance will take place in Cherry Point, North Carolina, under NAICS code 332721. Compliance requirements are stringent, necessitating adherence to the Buy American Act and the Berry Amendment for all materials. Quality control must be maintained through sampling plans per MIL-STD-1916 or ASQ H1331, while packaging and marking must follow ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fabrication of Terminal Cover (Critical Application)This subcontract involves the precision manufacturing of a single Terminal Cover, part number R0183011, for the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The project requires the use of precision machining equipment to meet critical aviation application standards, specifically adhering to Type I Code W quality assurance testing and a 120-month shelf-life specification. The work is categorized under NAICS code 332721 and will be performed in Middletown. Interested parties must respond by November 16, 2026, to fulfill the requirements for this critical aviation component.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This solicitation, issued by the DLA Land and Maritime Strategic Acq Program Directorate, is for the procurement of shoulder shafts (NSN 3040011804101) under a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. The requirement is for an estimated quantity of 6 units, with a guaranteed minimum of 1 unit once the contract becomes binding. This is a restricted source item requiring engineering source approval from the government design control activity and is designated as a critical application item. Delivery is required within 296 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be conducted via sampling methods such as MIL-STD-1916 or ASQ H1331, with a general requirement for zero non-conformances in sample lots. Compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment is required. Additionally, the government will not evaluate or award offers involving items produced through additive manufacturing. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

General Info

DLA procurement of 6 critical shoulder shafts, maximum value 350,000 dollars, 296-day delivery.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$350,000

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

AAR SUPPLY CHAIN, INC

Award Issued Date

10/15/2026, 12:00:00 AM UTC

Documents

award

High

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseAwarded

PostedSep 22

Combined Synopsis

Deadline changedOct 7

Response deadline changed from Oct 7, 2026 to Oct 13, 2026.

AwardedOct 15

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Theodore Misiolek

contact@example.gov

+1 (555) 000-0000

Full Description

DLA award SPE7L427D60FP posted on DIBBS. Awardee: AAR SUPPLY CHAIN, INC (CAGE 1Y249) Total Contract Price: $350,000.00 Award Date: 10-15-2026 Solicitation: SPE7LX-26-U-006E Line items: - SHAFT, SHOULDERED (NSN/Part 3040011804101, PR 1000243834)