Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHAFT, SHOULDERED

Active
SPE7L1-26-T-816DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SHAFT, SHOULDERED with NSN 3040-01-399-5695 and part number 1022-02-D, supplied by ENGINEERED COIL COMPANY, totaling 39 units at a unit price of $39.00, with a total contract value of $1,521.00. Delivery is required FOB origin within 262 days of contract award, with no variance permitted in quantity. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including the use of specific preservation methods, wrapping materials, and unit containers. Marking adheres to MIL-STD-129 with no special codes, and palletization follows DLA standards. The item must not contain intentional mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as defined by NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the required ship date set for April 9, 2027, and the original delivery deadline at April 28, 2027. All technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition type. The solicitation was issued under contract number SPE7L1-26-T-816D with a response deadline of July 20, 2026.

General Info

Procurement of 39 shafts, NSN 3040-01-399-5695, by DLA via DIBBS, US performance, response due July 20, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-816D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
DILLON JAMES
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,SHOULDERED
SHAFT,SHOULDERED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ENGINEERED COIL COMPANY 38450 P/N 1022-02-D P 4
ENGINEERED COIL COMPANY 38450 P/N 36-155-052
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439441 0001 EA 39.000
NSN/MATERIAL:3040013995695
DELIVERY (IN DAYS):0262
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7L1-26-T-816D
SECTION B
PR: 7017439441 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:DO OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/09/2027 Original Required Delivery Date:04/28/2027
SPE7L1-26-T-816D NSN/Part Number: 3040-01-399-5695 Quantity: 39 EA Purchase Request: 7017439441QTY: 39 Delivery: 262 days ADO

Similar Contracts

NAICS: 213113
New
DIBBS
BUSHING, SLEEVEThe contract is for the procurement of two bushings, sleeves with NSN 3120-01-521-2731, under solicitation SPE4A6-26-T-05MW, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 501 days after award, with performance to occur in Corpus Christi, Texas. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance are to occur at the origin, and government identification must be removed from any non-accepted supplies. Item Unique Identification is not required pursuant to the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including those located within the United States or foreign nationals employed by U.S. entities. DFARS 252.225-7048 applies, and distribution of such data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received DLA approval to access the controlled information. The solicitation was posted on July 12, 2026, with responses due by July 20, 2026, and is classified as a federal procurement under NAICS code 213113. Primary point of contact is Amanda Thomas, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, SHOULDEREDThe contract pertains to the procurement of 29 units of a SHAFT, SHOULDERED, STEERING component identified by NSN 3040-01-106-6619 under solicitation SPE7L3-26-T-109P, with a delivery requirement of 168 days after award. Full and open competition applies, and the item is subject to stringent technical and quality standards incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue or award date depending on acquisition size. The contract imposes configuration change management protocols, requiring formal engineering change proposals and variance requests for any deviations, and mandates inspection and acceptance at the manufacturer’s origin. All supplies must retain government identification until formally accepted, and any non-accepted items must have such identification removed prior to disposal. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, whether abroad or within the U.S., and is restricted to contractors with approved JCP certification, completed DOD training, and DLA approval to access controlled data. The point of contact for inquiries is Karen McCarley via email and phone, and performance is to occur at New Cumberland, PA, 17070-5002.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, SHOULDEREDThe contract pertains to the procurement of a SHAFT, SHOULDERED with NSN 3040-01-452-2164 and part number H306-240, supplied by TATE ANDALE, LLC, with a total quantity of three units to be delivered FOB origin within 168 days. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item is classified as a critical application item, and strict packaging standards under MIL-STD-2073-1E and MIL-STD-129 govern its preparation and marking, with no special marking required. Packaging must comply with DLA’s procurement requirements, including specific methods for preservation, wrapping, and containment using defined materials and codes. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for enumerated functional applications such as batteries, fluorescent lamps, and weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The solicitation number is SPE7L2-26-T-0543, with a response deadline of July 20, 2026, and the item falls under NAICS code 213113. The contract specifies a fixed unit price with zero variance allowed in quantity, and transportation logistics are governed by DLA procedural notes. The primary point of contact for inquiries is Shaun Sehgal of the Department of Defense’s Land Supplier Operations Wheeled Vehicles division.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAININGThe contract pertains to the procurement of 11 units of a STRAP, RETAINING with NSN 5340-01-187-8830 under Purchase Request 7017384773, requiring delivery within 250 days of award. The item is classified as a commercial item, including commercial of a type, and the technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. The specifications referenced in the solicitation are not fully detailed, but suppliers must ensure the delivered product meets all cited technical data and the part-numbered requirements regardless of incomplete documentation. Proprietary or insufficient data is acknowledged, placing responsibility on the vendor to provide compliant items based on adequate internal control. The solicitation, identified as SPE7L1-26-T-824N, was posted on July 9, 2026, with responses due by July 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 213113. Performance is designated for New Cumberland, PA, 17070-5002, with Michael Nordahl as the primary point of contact reachable at dla.flbc2prs@dla.mil or 4457370596.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
PIN, BOOMLOCKThe contract specifies the procurement of five units of a commercial off-the-shelf (COTS) item identified as PIN, BOOMLOCK with NSN 5315-99-746-6175 and part number 811/70099 from J.C. Bamford Excavators Limited. The item is designated as a critical application product and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements for Procurement. The unit of issue is each (EA), with a fixed quantity of five units and zero variance permitted. Delivery is FOB origin with a 168-day lead time, and inspection and acceptance occur at the destination. The items must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of January 2, 2027. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A6-26-T-05FD, with a response deadline of July 17, 2026, and is managed by the Department of Defense’s ASC Commodities Division. All documentation, including source approval requests, must meet the prescribed government standards, and government identification must be removed from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details