Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHAFT, STRAIGHT

Active
SPE7L1-26-T-04Z0Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7L1-26-T-04Z0 and issued by the Department of Defense Land Supply Chain, is for the procurement of 150 units of a straight shaft used for driver seat horizontal adjustment, identified by NSN 3040-00-476-9332. The delivery requirement is set for 120 days after receipt of order. The procurement falls under NAICS code 333613 and is managed by DLA Land and Maritime, with the place of performance located in New Cumberland, Pennsylvania. The contract incorporates several critical regulatory and quality requirements, including DLA packaging standards, CMMC Level 2 certification for third-party assessment, and strict adherence to the DLA Master List of technical and quality requirements. Notably, the item is subject to export control under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed training to access technical data. Additional mandates include configuration change management, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies.

General Info

DoD procurement of 150 driver seat shafts, delivered within 120 days to Pennsylvania.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-04Z0 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
CHANTEL JOSEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,STRAIGHT
SHAFT, DRIVER'S SEAT HORIZONTAL ADJUSTMENT.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE7L1-26-T-04Z0
SECTION B
export-controlled data. NSN/Part Number: 3040-00-476-9332 Quantity: 150 EA Purchase Request: 7018063936QTY: 150 Delivery: 120 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7M0-26-T-063M
This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, is for the procurement of one straight shaft, identified by NSN 3040-01-491-2835. The contract requires a delivery timeframe of five days after receipt of order and is managed under solicitation number SPE7M0-26-T-063M. Performance is centered in Portsmouth, Virginia, with the primary point of contact being Abaigael Masterson. The contract includes stringent regulatory and technical requirements, most notably the need for CMMC Level 2 certification and compliance with Covered Defense Information standards. It mandates adherence to DLA packaging requirements and strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the provider must follow specific configuration change management protocols and ensure the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
DRIVE SHAFT ASSEMBL
Solicitation # SPE7L3-26-T-216F
This contract is for the procurement of two vehicular constant velocity drive shaft assemblies, identified by NSN 2520-01-678-1596 and part number SPAL3120157. The order is issued by the Department of Defense Land Supplier Operations Vehicle Support with a required delivery date of June 25, 2026, and a delivery window of 20 days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in Fort Campbell, Kentucky. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. It explicitly prohibits the use of Class I ozone-depleting chemicals in the items delivered. Packaging must comply with MIL-STD-129 and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Item Unique Identification is not required for this specific order.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
INSERT, PULLEY
Solicitation # SPE7L4-26-T-6649
This contract is for the procurement of one pulley insert, identified by NSN 3020015159838, under solicitation number SPE7L4-26-T-6649. The item must adhere to technical specifications MIL-DTL-25988/3A Revision A and MIL-DTL-25988D, with a required delivery date of July 31, 2026, and a delivery window of 20 days after the order. Inspection and acceptance will occur at the point of origin. The agreement mandates strict compliance with DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the production or delivery of the items. Shipping must be handled via traceable means to the designated medical company address in Centreville, Alabama, and must not be sent via parcel post.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CHAIN, ROLLER
Solicitation # SPE7L4-26-T-6655
This contract is for the procurement of 58 packages of steel roller chain, identified by NSN 3020-00-252-7349 and part number 50-2. The chain features a 0.625 inch pitch, flat link, double strand, and single pitch design, conforming to American National Standards for precision power transmission. Each package consists of 132 pitches, and the material must be issued in 10 foot increments without being spooled. This is designated as a critical application item. Delivery is required within 115 days, with a need ship date of January 4, 2027, and a final required delivery date of February 6, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging, except for specific functional exceptions.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL
Solicitation # SPE7L1-26-T-05D3
This contract is for the procurement of mechanical actuators, specifically part number JE10612-101 from Juniper Elbow Co. Inc., under NSN 3040017343067. The requirement is split into three separate line items, each requesting a quantity of 4 units, for a total of 12 actuators. These items are designated as critical application items and are destined for the USS Somerset (LPD 25), USS New Orleans (LPD 18), and USS John P Murtha (LPD 26). Delivery is required within 20 days, with required delivery dates set for June 2026. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Key environmental restrictions are in place, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required for specific systems. Shipping must be handled via the fastest traceable means, and parcel post is explicitly prohibited.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, SPUR
Solicitation # SPE7L4-26-U-1172
This solicitation, issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, is for the procurement of 14 units of a spur gearshaft, identified by NSN 3040-01-384-6451. The contract requires delivery within 127 days after receipt of order. It is categorized under NAICS code 333613 and is managed by the Defense Logistics Agency. Compliance requirements are stringent, including CMMC Level 2 certification and adherence to DLA master lists for technical and quality requirements. The contract mandates specific packaging standards and the removal of government identification from non-accepted supplies. Additionally, the technical data is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L4-26-U-1174
This contract is for the procurement of 31 units of a shouldered shaft, identified by NSN 3040-01-247-0893, used on utility trucks and including a retaining ring. This is designated as a critical application item with associated part numbers from Marine Diesel, Inc. and Stanadyne Corporation. The solicitation is a total small business set-aside under NAICS code 333613, issued by the Department of Defense through the LSO Combat Vehicles and Armament. The delivery requirement is set for 127 days from the order date, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. The contract incorporates specific technical and quality requirements as outlined in the DLA master list and requires the removal of government identification from any non-accepted supplies.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-216P
This contract is for the procurement of 30 shoulderered tilt lock shafts used on modified 35 HP gasoline outboard marine engines, specifically identified by NSN 3040012765017 and BRP US Inc part number 388661. The order is managed by the Department of Defense under solicitation SPE7L3-26-T-216P, with a required delivery date of September 2, 2026, and a delivery window of 20 days. The items are to be shipped FOB Origin to the Government of Israel Ministry of Defense. Compliance requirements include adherence to DLA packaging standards RP001 and MIL-STD-129 for marking, as well as MIL-STD-2073-1E for delivery preparation. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L3-26-T-184J
This contract is for the procurement of two linear actuating cylinder assemblies, identified by NSN 3040-01-613-0255 and Lake Shore Systems part number F083658. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The required delivery date is May 6, 2027, with a need ship date of January 5, 2027. The agreement mandates strict adherence to DLA technical, quality, and packaging requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. There is a strict prohibition on the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where specifically authorized for functional components. Inspection and acceptance will occur at the destination.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-6664
This federal solicitation, identified as SPE7L4-26-T-6664 and issued by the Department of Defense agency LSO Combat Vehicles and Armament, is for the procurement of 11 units of vehicular universal joint yokes and slingers under NSN/Part Number 0001S00000053. The contract falls under NAICS code 333613 and requires delivery within 428 days after the order is placed. The place of performance is located in Albany, and the procurement process includes first article approval and testing requirements, with quotes submitted via the DIBBS system. Due to the nature of the technical data involved, this contract is subject to strict export controls under the International Traffic in Arms Regulations and the Export Administration Regulations. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification who have completed the required training and questionnaires. Compliance with DFARS 252.225-7048 is mandatory, as the technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or the Department of Commerce.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L3-26-T-184T
This contract is for the procurement of four linear actuating cylinder assemblies, identified by NSN 3040016899667 and part number WK-871-147 from Walz and Krenzer Inc. Each of the four line items consists of one unit to be delivered to different naval vessels, including the USS Wichita, USS Indianapolis, USS Billings, and USS Cooperstown. The required delivery dates are set for August 2026, with a delivery window of 20 days after the order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Environmental restrictions are in place prohibiting the use of class I ozone-depleting chemicals and the intentional addition of mercury, except for specific functional exceptions. All shipments must be sent via the fastest traceable means, and the terms are established as FOB Destination with inspection and acceptance occurring at the destination.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
CONTROL, REMOTE SWITCHI
Solicitation # SPE4A7-26-T-704V
This contract is for the procurement of seven remote switching control units, identified by NSN 5895-01-197-5009 and part number WK-897059-000 from Kidde-Fenwal, LLC. The order is managed under purchase request 7017916184 with a delivery timeframe of 156 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Diego. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements. This is a total small business set-aside procurement under NAICS code 333613.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
ADAPTER, TIE DOWN
Solicitation # SPE7L1-26-T-04W8
This solicitation from the Department of Defense Land Supply Chain is for the procurement of two tie down adapters under part number 5340-01-534-7355. The contract requires delivery within 10 days after receipt of order and is performed at Fort Sill. The procurement is governed by NAICS code 332510 and includes specific technical and quality requirements maintained in the DLA master list. Compliance mandates include CMMC Level 2 certification for third-party assessment and strict adherence to covered defense information protocols. The contract prohibits the use of class I ozone depleting chemicals and enforces rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specific DOD export training. All packaging must meet DLA procurement standards, and government identification must be removed from any non-accepted supplies.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-U-0649
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 468 O-rings under National Stock Number 5331-01-527-8458. The contract requires delivery within 88 days after the order is placed. The primary point of contact for this acquisition is Paul Kelley. The items must adhere to strict technical and quality requirements as specified in the DLA Master List. Because these components are susceptible to deterioration from ultraviolet rays, they must be packaged and sealed in medium duty, waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1. These packaging standards apply to all delivery methods, including direct vendor delivery and foreign military sales.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-05A3
This solicitation is for the procurement of 17 helical compression springs under solicitation number SPE7L1-26-T-05A3 for the Department of Defense Land Supply Chain. The items must be delivered within 116 days after the order is placed, with the place of performance located in Phoenix, Arizona. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the maintenance of supply chain traceability documentation. Prohibited materials include Class I ozone depleting chemicals and asbestos, and any substitute materials must receive formal approval. Additionally, the contractor must comply with requirements regarding the removal of government identification from non-accepted supplies and the submission of documentation for source approval requests.
Spring Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
COOLER, LUBRICATING
Solicitation # SPE7L1-26-T-04Y4
This contract is a solicitation for one lubricating cooler, identified by NSN 2930-01-439-0535, for the Department of Defense Land Supply Chain. The item is designated as a critical application item with approved parts from Rolls-Royce Corporation and Fluid Handling LLC. The procurement is a total small business set-aside under NAICS code 333415, with a required delivery date of August 27, 2026, and a delivery window of five days after the order. The shipment is destined for the USS Howard DDG 83 and must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will take place at the destination.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L1-26-U-0654
This contract is for the procurement of one unit of a nonmetallic special shaped section seal, identified by NSN 5330123826622 and part number A3709 from Sand-Profile GmbH. Each unit consists of 50 meters of material. The item is subject to a non-extendable shelf life of 60 months and must be packaged in a medium duty, waterproof, greaseproof, and opaque bag to prevent deterioration from ultraviolet rays, adhering to MIL-DTL-117 and MIL-STD-130N standards. The order is issued by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-U-0654 as a total small business set-aside. Delivery is required within 97 days FOB Origin, with inspection and acceptance occurring at the destination. All packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
FRAME, STRUCTURAL, VE
Solicitation # SPE7L1-26-T-05E6
This solicitation, identified as SPE7L1-26-T-05E6, is issued by the Department of Defense Land Supply Chain for the procurement of two structural vehicular frames under NSN 2510-01-601-7463. The contract requires a rapid delivery turnaround of five days after receipt of order. It is categorized under NAICS code 332999 and is managed by the Defense Logistics Agency. The agreement mandates strict adherence to several technical and security standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and quality requirements. Significant emphasis is placed on export control, as the technical data is subject to ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the contract specifies requirements for configuration change management, inspection at origin, and the use of Qualified Products or Manufacturers Lists.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CUP, COMPRESSION
Solicitation # SPE7L1-26-T-04W0
This solicitation from the Department of Defense Land Supply Chain is for the procurement of 11 compression cups under NSN 5340-01-364-4101. The contract requires delivery within 20 days after the order is placed, with the place of performance located in Pearl Harbor, Hawaii. The solicitation was posted on August 30, 2026, with a response deadline of September 10, 2026. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the item contains technical data subject to ITAR or EAR restrictions, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Unauthorized disclosure of this technical data to foreign persons or nationals is prohibited under DFARS 252.225-7048.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SINGLE DISK
Solicitation # SPE7L1-26-T-04Y3
This contract is for the procurement of one single disk brake, identified by NSN 2530014127658 and TLD Wollard LLC part number SB479. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. The shipment is set as FOB Origin, with both inspection and acceptance occurring at the destination in Boise, Idaho. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Specific packaging instructions require the use of corrugated fiberboard and protective coatings to prevent surface abrasion and corrosion, ensuring the item is immobilized within the container. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited, and all shipping must be conducted via the fastest traceable means, excluding parcel post.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-T-04X4
This contract, identified by solicitation number SPE7L1-26-T-04X4, is for the procurement of two fluid pressure filter elements under NSN 2910-00-470-7076. The order is issued by the Department of Defense Land Supply Chain and specifies a delivery timeframe of five days after order. Approved parts include those from WIX Corp, ArvinMeritor Inc, Ford Motor Craft, Cummins Filtration Inc, Komatsu America Corp, and Genuine Parts Company. The items are to be delivered FOB Origin and shipped to Camp Lemonnier in Djibouti. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirement RP001. All technical and quality requirements are governed by the DLA Master List, and the original required delivery date is set for August 27, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
ANALYZER SET, VEHICU
Solicitation # SPE7L1-26-T-04Y1
This contract is for the procurement of one vehicle analyzer set, identified by NSN 4910016536095 and Caterpillar part number 515-8465. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-04Y1. Delivery is required within five days of order, with a final required delivery date of August 27, 2026. The item is to be shipped FOB Origin to the USCGC Aspen in Homer, Alaska, using the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, specifically citing RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA master list requirements take precedence. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the delivered items. Inspection and acceptance will occur at the destination.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7L1-26-T-05C2
This contract is for the procurement of 240 feet of metallic tubing made from a 90-10 copper-nickel alloy. The tubing must have a 4-inch outer diameter and a 0.095-inch wall thickness, be annealed, and be provided in random lengths between 12 and 20 feet. The material must adhere to military specifications for seamless and welded copper-nickel alloy tubes and comply with the Navy's Industrial Material Improvement Program, which requires specific continuous marking every three feet, including the producer's name, specification, size, contract number, and heat or lot number. The agreement mandates strict adherence to environmental and quality standards, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with specific requirements for metal certification and packaging according to MIL-STD-2073-1E and MIL-C-3993. Delivery is set for 115 days after order, with a quantity variance allowed of plus or minus 10 percent, and the final destination is the DLA Distribution New Cumberland facility in Pennsylvania.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
IMPELLER, CUP HOUSIN
Solicitation # SPE7L1-26-T-05A4
This contract, identified as SPE7L1-26-T-05A4, is a solicitation from the Department of Defense Land Supply Chain for one impeller cup housing, part number 340619, with NSN 2930-01-575-3956. The procurement is managed under purchase request 7018084293 and requires delivery within 20 days. The item is to be delivered FOB Origin to the Explosive Ordnance Disposal Group 2 in Virginia Beach, Virginia, with a required delivery date of August 28, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that government identification must be removed from any non-accepted supplies. Shipment must be handled via the fastest traceable means, explicitly prohibiting the use of parcel post.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details