Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHEET, METAL

Active
SPE7M0-26-T-026LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 20 units of sheet metal identified by NSN 9535-01-348-3224 under solicitation SPE7M0-26-T-026L, with a delivery requirement of five days after order date. All items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA specifications, and all government identification must be removed from non-accepted supplies. The material must be free of asbestos, and any substitutes require formal approval under clause L30 and provision 4 conditions. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Identification markings must conform to MIL-STD-130N dated November 16, 2012. The contract is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office with performance occurring at Pearl Harbor, Hawaii. The primary point of contact is Grace Beck, reachable via email and phone provided. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under a federal acquisition framework governed by NAICS code 332510.

General Info

Procure 20 sheet metal units NSN 9535-01-348-3224, deliver in 5 days, meet DLA, MIL-STD-130N, no asbestos or mercury except approved uses.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

667 SAFEGUARD ST SUITE 100, PEARL HARBOR, HI, 96860-5033, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-026L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Grace BECK
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET,METAL
SHEET,METAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 9535-01-348-3224 Quantity: 20 EA Purchase Request: 7017706911QTY: 20 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A5-26-T-319S
The contract is for the supply of two machine thread plugs with NSN 5365-01-266-6399 under solicitation SPE4A5-26-T-319S, with a required delivery within 20 days of award. The item is procured by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, and the contract adheres to DLA packaging and technical requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The supplier must ensure no intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lights, sensors, weapon systems, and regulated chemical reagents, and any portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. An alternate offeror must submit a complete data package for both the approved and alternate part since no data is currently available, and the solicitation closes on August 11, 2026, with contact information provided through Andrew Kish at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-11KR
The contract pertains to the procurement of 19 screw thread inserts with NSN 5325-01-125-3163, issued under solicitation SPE4A6-26-T-11KR by the ASC Commodities Division of the Department of Defense. The delivery is scheduled for 567 days after award, and the solicitation was posted on August 3, 2026, with responses due by August 11, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—including foreign nationals within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information. Access to the export-controlled technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. Distribution is tightly controlled to ensure compliance with U.S. national security policies, and all recipients must be formally authorized by the DLA controlling authority. The place of performance is identified as New Cumberland, Pennsylvania, with Duane Watkins Jr. designated as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE7L1-26-T-907V
The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAPPING
Solicitation # SPE7L1-26-T-908A
The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE4A6-26-Q-1254
The contract pertains to the procurement of 49 units of COVER, ACCESS with NSN 5340-00-870-1655 under solicitation SPE4A6-26-Q-1254, with a delivery deadline of 358 days after date of order. All items must be produced and delivered from origin with inspection and acceptance occurring at origin, and are subject to strict packaging requirements outlined in DLA’s RP001 and MIL-STD-129, including commercial packaging per ASTM D3951 unless hazardous material is involved, in which case FED-STD-313 and TQ requirement IP025 apply. Item unique identification is waived per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs marking and labeling. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier must comply with a suite of technical and quality requirements including RQ001 for tailored higher-level quality standards, RQ042 for ISO 9001:2015, RT001 for measurement and test equipment calibration, and RD004 for CMMC Level 2 self-assessment certification. Configuration changes require formal engineering change proposal requests under RQ002, and government identification must be removed from non-accepted supplies as per RQ011. All requirements referenced by R or I numbers derive from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Deliveries must be palletized per RP001 and shipped to the designated DLA Distribution Depot in Tinker AFB, Oklahoma, with transportation governed by DLAD Proc Note C19 and C20. The contract enforces a strict 0% quantity variance and is classified as a Critical Application Item for The Boeing Company.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9155
This contract specifies the procurement of STRAP, WEBBING under solicitation SPE7LX-26-U-9155, with a total quantity of 5,051 units at a unit price of $5,051.00, delivered FOB origin within 67 days. The item is identified by NSN 5340-01-659-7728 and part number HS404H, and must conform to source-controlled drawings and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packing and labeling must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous material handled per FED-STD-313 and TQ requirement IP025, otherwise commercially packaged per ASTM D3951. The contract prohibits use of Class I ozone-depleting chemicals and requires approval for any substitute chemicals. Configuration changes must follow an Engineering Change Proposal process, and deviations require formal variance requests. Certificate of Conformance procedures are authorized unless suspended by a Quality Assurance Letter of Instruction. Only approved sources listed on the source-controlled drawing may supply the item, though additional qualified sources may be recognized without drawing revision. The procurement is a total small business set-aside under NAICS 332510, with inspection and acceptance conducted at destination and no variance allowed in quantity. All packaging must be palletized in accordance with DLA requirements, and the unit of issue is EA per contract specifications.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11LC
The contract specifies the procurement of 60 retaining rings with NSN 5325-01-602-6198 under solicitation SPE4A6-26-T-11LC, requiring delivery within 227 days to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must use preservation method 10, dry, with no cushioning or dunnage, in bulk outer packaging, and palletization must adhere to DLA’s specified guidelines. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, packing, and marking materials, except for limited functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment barrier. The unit price is $60.00 per EA, totaling $3,600, with zero variance allowed in quantity. Inspection and acceptance occur at destination, and delivery is FOB origin. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract is issued under DoD unit of issue, with freight and shipping addresses confirmed for the New Cumberland facility, and transportation governed by DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BAR, LATCH
Solicitation # SPE7LX-26-U-9147
This contract is for the procurement of 570 units of a BAR, LATCH with NSN 5340-01-675-0753, issued under solicitation SPE7LX-26-U-9147 as a Total Small Business Set-Aside under NAICS code 332510. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and delivery is required within 61 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Configuration changes require formal engineering change proposals and variance requests. The item involves controlled technical data subject to ITAR or EAR export regulations, meaning unauthorized disclosure—even to foreign nationals within the U.S.—is prohibited. Only contractors with JCP certification, completed DOD export control training, and formal DLA approval may access this data. The contracting office is the Strategic Acq Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLUG, LEFT
Solicitation # SPE4A7-26-T-607A
The contract specifies the procurement of a PLUG, LEFT with part number 3A020-0215 and NSN 5365-99-723-4334, for a quantity of seven units, to be delivered FOB origin within 144 days of award. The supplier, IPECO HOLDINGS LTD DBA IPECO, is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede general standards such as ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be assigned verification levels or AQLs as defined. The item is subject to destination inspection and acceptance, with no variance permitted in quantity. The delivery address is Arizona Industries for the Blind in Phoenix, AZ, and the required ship date is January 3, 2027. Technical data is not available from DLA, and the contractor must ensure compliance with all referenced quality and documentation standards including those for Source Approval Requests. The contract was issued under solicitation SPE4A7-26-T-607A with a response deadline of August 11, 2026, and is classified under NAICS code 332510 by the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, EXTERNALLY THREAD
Solicitation # SPE4A5-26-T-319R
The contract specifies the procurement of two externally threaded rings with NSN 5365-01-005-1901 and part number 41002372 from WOODWARD HRT INC, to be delivered within 20 days to the Taiwan Army’s Zuo-Ying Ammunition Sub facility in Kaohsiung City. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards, while marking adheres strictly to MIL-STD-129 with no special markings required. Palletization follows DLA packaging requirements, and unit of issue is each. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List referenced in RQ017 and RA001, with revision control dependent on solicitation or award date. The contract is issued under SPE4A5-26-T-319R, with a response deadline of August 11, 2026, and is classified under NAICS code 332510. Funds are allocated for delivery by August 4, 2026, and government-use data includes procurement codes and logistics designators.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE7L1-26-T-907P
This contract pertains to the procurement of 18 units of a tie-down cargo system for vehicles, identified by NSN 5340-01-730-7892 and part number R2616SH-B from RATCHET DEPOT INC. The delivery is required within 176 days from the contract date, with shipment originating FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination facility. All items must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 for DLA packaging guidelines. The use of Class I ozone-depleting chemicals is categorically prohibited, and any substitutes must be pre-approved unless explicitly permitted by the specification. Items must be marked in accordance with MIL-STD-130N for identification of U.S. military property. Hazardous materials, if applicable, must be packaged per TQ requirement IP025 as defined in FED-STD-313, otherwise commercial packaging per ASTM D3951 is acceptable, provided DLA Master List requirements override it. Palletization must meet DLA’s packaging standards. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and the unit of issue is each, with no allowance for partial shipments. The contract was solicited under SPE7L1-26-T-907P with a response deadline of August 14, 2026, and the required ship date is February 7, 2027. The responsible point of contact is Rodney McNinch of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-907U
This contract specifies the procurement of a threaded standoff, part number 3-154844-01-20 with NSN 5340-01-686-5539, for a single unit at a total price of one dollar. Delivery is required within 20 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance both occur at the destination, and the item must be shipped via traceable freight methods—parcel post is prohibited. Packaging must comply with DLA requirements, specifically RP001, and adhere to MIL-STD-129 labeling standards; if hazardous per FED-STD-313, it must follow TQ requirement IP025, otherwise it must be commercially packaged in accordance with ASTM D3951, though all DLA Master List requirements override ASTM. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. The shipment is directed to the warehouse at 5450 Carlisle Pike, Building 209N, Mechanicsburg, PA 17050-2411, under the NAVSEALOGCEN code 63113. The solicitation number is SPE7L1-26-T-907U, with a required delivery date of July 28, 2026, and the contract falls under NAICS code 332510, managed by the Department of Defense’s Land Supply Chain. All technical and quality specifications referenced through R or I numbers are governed by the DLA Master List, with the revision effective on the solicitation issue date controlling compliance.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-026W
The contract is for one elbow hose with NSN 4730-01-517-8231 and part number 112-4387 for Caterpillar Inc or 24KP504 for Oshkosh Defense LLC, requiring delivery within five days FOB origin with no quantity variance allowed. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, packed in a unit container with no special marking or palletization beyond prescribed guidelines. Ozone-depleting chemicals are strictly prohibited in any component or process, and any substitutes must be pre-approved unless already authorized by specification. The delivery destination and shipping address is Schenfeld Barracks, HI, with the shipment designated as RDD 999/NMCS under DLAD procedure notes C19 and C20. The contract number is SPE7M0-26-T-026W, with an original required delivery date of July 31, 2026, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The unit of issue is each, priced at $1.00 per unit, with inspection and acceptance occurring at the destination point. Government use identifiers and freight details are specified for internal logistics tracking, and the procurement falls under NAICS code 332919 managed by the Department of Defense’s Maritime Supply Chain ESOC.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
HEADSET, ELECTRICAL
Solicitation # SPE7M0-26-T-027G
The contract is for the procurement of 20 electrical headsets with NSN 5965-01-686-4435 under solicitation number SPE7M0-26-T-027G, which is a total small business set-aside classified under NAICS code 334310. Delivery is required within five days of award, and the solicitation was posted on August 3, 2026, with responses due by August 14, 2026. The acquisition is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with Audrey Acuna as the primary point of contact. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The alternate offeror must submit a complete data package for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and the entire procurement falls under federal procurement rules with no data available on specific packaging requirements beyond general DLA compliance.
Audio and Video Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-027R
This contract pertains to the procurement of a single hose assembly, non-metered, identified by NSN 4720-01-571-2621 and part number AT361247 from Deere & Company, with a required delivery of one unit within five days of contract award. The item must be delivered FOB origin and is subject to inspection and acceptance at the destination, with no tolerance allowed for quantity variance. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and specific packaging codes, with no special marking required. The item is to be palletized per DLA guidelines and shipped to the DLA distribution facility in Santa Rita, Guam, with final delivery destined to the USMC Engineer Detachment Pacific in Koror, Palau. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with the applicable revision based on the solicitation issue date. Transportation and shipment procedures follow DLAD PROC NOTES C19 and C20, and the unit of issue is EA. The contract was solicited under SPE7M0-26-T-027R, with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. Point of contact for the procurement is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC Buys office, and the NAICS code is 332999 for other miscellaneous manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-027B
The contract is for a single unit of a metal pipe assembly identified by NSN 4710-01-662-4932 and part number 1051F-01-05, with a total price of one unit at $1.00. Delivery is required within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination point. Packaging must fully comply with MIL-STD-2073-1E, including preservative methods AE clng/dry, and marking must adhere to MIL-STD-129 with no special marking required. The item must be palletized per DLA packaging requirements, shipped via traceable freight methods excluding parcel post, and delivered to Joint Base Lewis McChord, Washington. The shipment is designated as RDD/NCMS with no RDD code and must be marked for delivery to W68PPA, 0024 QM CO Composite Suppl. The contract falls under solicitation SPE7M0-26-T-27B, with a required delivery date of July 31, 2026, and technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. All documentation and compliance must align with DoD standards, including unit of issue and procurement protocols.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
SEPERATOR, MOISTURE
Solicitation # SPE7M0-26-T-027F
This contract is for the procurement of a moisture separator, identified by NSN 4310016602143 and part number 17-600-P2LP from Peerless Mfg Co, with a single unit required and a total purchase price of $1.00. Delivery is required within five days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and packaging codes, while marking follows MIL-STD-129 with no special marking required. The item is destined for USS RALPH JOHNSON DDG 114 at FPO AP 96691-3300, with transportation handled under DLAD PROC NOTES C19 and C20, and palletization must meet DLA packaging requirements. The solicitation number is SPE7M0-26-T-027F, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys, with a response deadline of August 14, 2026, and a required delivery date of July 31, 2026. Technical and quality requirements are governed by the DLA Master List, and the unit of issue is the individual unit EA as defined by ANSI X12 standards. All vendor compliance, including documentation and submission, must align with DLA’s eProcurement guidelines and the specified point of contact, Grace Beck, for any inquiries.
Air and Gas Compressor Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-027E
The contract pertains to the procurement of one unit of a metal tube assembly with NSN 4710-01-541-3146 and purchase request number 7017707031, under solicitation SPE7M0-26-T-027E. Delivery is required within five days of award, with FOB origin terms and no quantity variance permitted. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, while adhering to MIL-STD-129 for marking and labeling. All packaging and labeling must follow DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. The unit of issue is each, and palletization must conform to DLA packaging directives. The shipment must be sent via traceable freight methods—parcel post is prohibited—and delivered to the specified freight address in Conneaut Lake, Pennsylvania, with a mandatory military shipping identifier. The required delivery date is July 31, 2026, and the contract includes specific government-only fields for tracking and logistics control. The supplier, Grove U.S. LLC, is obligated to meet all technical and quality standards referenced through DLA’s online master list, with revisions tied to the solicitation issue date controlling compliance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-026H
The contract pertains to the procurement of one metallic tube with NSN 4710014773236 and part number 7910016291, issued under solicitation SPE7M0-26-T-026H by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of award, with FOB origin terms and zero variance allowed in quantity. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, including palletization standards. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The tube is to be shipped via traceable freight methods excluding parcel post to the designated delivery point in Conneaut Lake, Pennsylvania, with mandatory marking and documentation including the government purchase request number 7017707035 and government-furnished identifiers. The original required delivery date is July 31, 2026, and the item is classified under NAICS code 331210 for manufacturing of metal pipe and tube.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-026Z
This contract is for a single electrical plug connector with the NSN 5935-01-703-7200 and solicitation number SPE7M0-26-T-026Z, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The item is classified as a critical application component and must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific packaging, marking, and identification mandates including MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling. The connector must be supplied by one of four preapproved manufacturers: Delta Electronics Manufacturing Corp, Northrop Grumman Systems Corporation, Radiall USA Inc, or SV Microwave, Inc., each with designated part numbers. Delivery is required in five days FOB destination with no quantity variance allowed, and inspection and acceptance occur at the delivery point. Packaging must adhere to DLA packaging guidelines, including palletization standards and special marking instructions, with no additional special markings required. The shipment is destined to APO AP 96543-4052 with a backup freight address at Anderson AFB in Guam, and transportation instructions reference specific DLA procedural notes. The original required delivery date is July 31, 2026, and the contract includes government use codes and contact information for inquiries.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, TORQUE
Solicitation # SPE7M0-26-Q-1144
The contract pertains to the procurement of a single unit of a TORQUE MOTOR with NSN 6105-01-488-4917 under solicitation SPE7M0-26-Q-1144, with a mandatory delivery deadline of 30 days after award. All technical and quality requirements governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment later updates the referenced revision. The contractor must comply with DLA packaging and data requirements without exception, and if an alternate part is proposed, a complete data package covering both the approved and alternate part must be submitted. Government identification must be removed from any non-accepted supplies. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M0-26-T-026V
The contract pertains to the procurement of one check valve, identified by NSN 4820-01-408-6995 and part number 09-21430-1-1, supplied by Sargent Aerospace & Defense, LLC, for a critical application. Delivery is required within five days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s broader packaging requirements, and the item must be shipped via the fastest traceable means, explicitly excluding parcel post. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware unless exempted for specific functional components such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-bearing devices needing shockproof construction and secondary containment as mandated by NAVSEA 5100-003D. The contract references technical and quality requirements from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date. Delivery is targeted for July 31, 2026, to the Portsmouth Naval Shipyard in Kittery, ME, with the point of contact for inquiries being Kathleen Hipes of the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M0-26-T-026F
This contract solicits three adapter connectors with NSN 5935-01-017-5892, to be delivered within five days of award, FOB origin, with zero variance in quantity. The items must comply strictly with MIL-STD-2073-1E for packaging and MIL-DTL-55330 for preservation, while marking follows MIL-STD-129 with no special markings required. The connectors are classified as critical application items and must be sourced exclusively from approved suppliers identified by their part numbers and manufacturers. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, or weapon systems, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is prohibited unless prior written approval is obtained from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. The delivery destination is Holloman AFB, NM, and shipping must occur via traceable freight methods—parcel post is explicitly forbidden. The item is subject to inspection and acceptance at the destination, and performance must meet all technical and quality requirements referenced from the DLA Master List. The contract closes for responses on August 14, 2026, with an original required delivery date of July 31, 2026, and is managed by the Department of Defense under the Marine Corps Supply Chain E-SOC.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTER
Solicitation # SPE7M0-26-T-026G
The contract pertains to the procurement of a Synchro Transmitter, identified by NSN 5990-00-913-5542 and part number AY605-30B1, with a single unit requirement to be delivered within five days of award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically at Hill Air Force Base, Utah. The item is classified as a critical application with strict packaging and handling requirements rooted in MIL-STD-2073-1E and MIL-STD-129, including special ESD and EMI protections mandated by MIL-PRF-81705, which require certified barrier materials and qualified suppliers listed on QPL-81705. All components must be safeguarded against electrostatic discharge and electromagnetic interference with proper cushioning and protective packaging, especially for leads and terminals, even when not explicitly detailed in packaging codes. The acquisition is subject to tailored higher-level quality requirements and incorporates technical standards from the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise stated. Cybersecurity compliance is required at CMMC Level 2 via self-assessment, and the supplier must ensure all packaging and handling protocols meet DLA mandates for ESD/EMI environments. The contract includes specific shipping instructions prohibiting parcel post and requiring fastest traceable means, with detailed parcel and freight addresses provided. All information on unit of issue, packaging, and marking is governed by DLA directives, and the supplier must verify compliance with all referenced standards. The original required delivery date is July 31, 2026.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details