This Solicitation opportunity from Department Of Defense was posted on September 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SHEET, METAL

Closed

SPE8E9-26-T-3881Federal

Submission Closed10/05/2026, 12:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331110

New

Steel Piling SupplyThis subcontract opportunity with Manson Construction Co. involves the supply, fabrication, and delivery of steel piles for the WETA Vallejo Ferry Terminal Reconfiguration project. The selected contractor will be responsible for producing steel piling that meets specific project requirements for in-water construction and ensuring all materials are delivered directly to the project site. The contract is designated as a small business set-aside, specifically for Disadvantaged Business Enterprises under the Department of Transportation, falling under NAICS code 331110. Interested parties must respond by November 20, 2026, following the posting date of November 13, 2026.

Manson Construction Co.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0205

Solicitation SPE8E4-27-T-0205 is a small business set-aside request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 119 feet of Steel Comp 4130 metal bar. The required material must be cold drawn, normalized, and square, measuring 1.000 inch wide across flats and supplied in whole feet lengths of 10, 11, or 12 feet. This is a critical application item that must comply with several technical standards, including SAE AMS-S-6758B, ASTM A700-14, and SAE AMS2806. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96 are eligible for award. The contract mandates strict quality and marking requirements, including the provision of a Certificate of Quality Compliance with every shipment. Continuous identification markings must be applied via stamping or stenciling and include the contract delivery order number, NSN, specification number, grade, manufacturer details, and dimensions. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E, with specific preservation and palletization requirements per RP001. Delivery is set for FOB Destination to DLA Distribution Cherry Point, North Carolina, with an original required delivery date of March 10, 2027. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Charpy Standard Reference Materials (SRM) SupplyThis subcontract, issued by the Government of Canada's Department of National Defence, involves the supply of certified Charpy Standard Reference Materials for prime contractors. These certified reference specimens are essential for calibrating and verifying the accuracy of impact test machines, ensuring full compliance with SOR paragraph 3.2.24. The procurement is categorized under NAICS code 331110, with the place of performance located in Gatineau, Canada, within the National Capital Region. The solicitation was posted on November 13, 2026, and requires a response by November 27, 2026.

Department of National Defence

POSTED

DEADLINE

Specialized Steel Sheet Supply (STEEL COMP 631 CR)This subcontract involves the supply and processing of specialized STEEL COMP 631 CR metal sheets to support prime contractors for DLA Troop Support Construction and Equipment contracts. The scope of work includes sourcing the material and performing critical industrial processes such as shearing, annealing, and solution heat treatment to achieve a specific dull finish. All delivered sheets must adhere to precise dimensions of 0.025 inches in thickness, 36.00 inches in width, and 10.00 feet in length, while conforming to required metallurgical states. Managed by the Department of Defense in San Diego, the contract mandates strict compliance with MIL-STD-129 marking standards and hazardous material safety data requirements. The project falls under NAICS code 331110, with performance taking place in San Diego, California. Interested parties must note the response deadline of November 23, 2026.

POSTED

DEADLINE

Supply of Raw Material for Close Tolerance BoltsThis subcontract involves the supply of certified aerospace-grade alloy or specialty steel intended for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the sourcing and cutting of raw stock to specific sizes according to the DLA Master List for NSN 5306-01-603-1947. To ensure quality and compliance, the provider must deliver Material Test Reports and Certificates of Conformance along with the raw material stock. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place in San Diego. Strict adherence to the Buy American Act and DFARS specialty metals requirements is mandatory. Interested parties should note the response deadline of November 20, 2026, for this procurement categorized under NAICS code 331110.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Component Supply for Shaft AssembliesThis subcontract, titled Precision Component Supply for Shaft Assemblies, is issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate. The scope of work involves the provision of raw materials and precision-machined sub-components, including specialized cabling, couplings, and housings, for prime contractors. A critical requirement of the contract is the supply of high-grade alloys and materials that meet the Critical Application Item designation, supported by full material certifications and quality assurance documentation in accordance with the DLA Master List. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331110. Interested parties must submit their responses by November 27, 2026. The selected provider will be responsible for delivering all specified raw materials or sub-components directly to the prime manufacturer to support DLA supply contracts.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supplier of SAE AMS6382S Steel Bar (4140 HR)This subcontract involves the supply of 4140 HR annealed round steel bar stock for prime contractors working on Defense Logistics Agency procurement projects. The required material must conform to SAE AMS6382S specifications, featuring a 4.500-inch diameter and lengths ranging from 8 to 12 feet. All deliverables must be properly marked via stenciling or stamping and packaged in accordance with ASTM A700, MIL-STD-129, and MIL-STD-2073-1E standards. Compliance requires the provider to hold QSLD certification and furnish Mill-Material Certification for all delivered stock. The project falls under NAICS code 331110 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of November 16, 2026, for this procurement effort.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for High-Strength Shear BoltsThis subcontract involves the supply of high-strength alloy steel raw material intended for prime contractors working on DLA Weapons Support ASC projects. The supplier is responsible for providing metal stock that strictly adheres to the chemical and physical properties specified in drawings 78286 and 81996. To ensure full traceability and compliance with the Buy American Act, the provider must furnish Material Test Reports and Certificates of Conformance along with the delivery of the certified raw material stock to the manufacturer. Managed under the Department of Defense and the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 331110. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 20, 2026, for this procurement effort focused on the production of high-strength shear bolts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

High-Strength Alloy Steel SupplyThis subcontract opportunity is for the supply of high-strength raw alloy steel bars, forgings, or billets to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider must deliver certified raw material stock that adheres to the specific chemical and physical properties outlined in Drawing NR 53711 8843219. Essential deliverables include the provision of Mill Test Reports and strict adherence to DFARS 252.225-7001 Buy American Act requirements. Managed by the Department of Defense, this project is designated as a Total Small Business Set-Aside under NAICS code 331110. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Steel Bar Manufacturing and SupplyThis subcontract involves the manufacturing and supply of specialized hot-rolled steel bars to support prime contractors fulfilling Defense Logistics Agency requirements. The scope of work focuses on producing or sourcing round, quenched and tempered steel bars that adhere to Grade B16 specifications and the DLA Master List of Technical and Quality Requirements. Specifically, the contractor must provide bars with a 2.250 inch diameter in lengths ranging from 12 to 20 feet, ensuring all finished metal meets the metallurgical properties defined by NSN 9510-00-230-3270. Managed under NAICS code 331110 for the Department of Defense, the contract is centered on delivery to the Defense Logistics Agency with performance taking place in Portsmouth. Interested parties should note the response deadline of November 23, 2026, to ensure compliance with the procurement timeline for these critical industrial materials.

Defense Logistics Agency

POSTED

DEADLINE

Corrosion-Resisting Steel Wash Basin SupplierThis subcontract involves the supply of corrosion-resisting steel wash basins to prime contractors for the Department of Defense Medical Supply Chain. The supplier is responsible for manufacturing or sourcing basins that strictly adhere to NSN 6530-00-771-0105 specifications. All units must be packed in sealed unit containers and commercial exterior shipping containers in accordance with DLA Packaging Requirements RP001 and Technical/Quality Requirements RA001, with final delivery to the designated point of delivery. The contract is categorized under NAICS code 331110 and specifies Fort Bliss as the place of performance. Interested parties must note the response deadline of November 19, 2026, for this procurement effort.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Aerospace-Grade Material SupplyThis subcontract for Aerospace-Grade Material Supply involves the provision of raw aerospace-grade alloys or composites to prime contractors supporting DLA Aviation supply contracts. The materials must strictly adhere to TDP specifications and NSN 1560-00-545-5100, with a requirement for Mill Test Reports to ensure full traceability and compliance with rigorous aviation standards. The selected supplier is responsible for delivering these certified raw materials directly to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331110. Performance will take place at Robins Air Force Base. The solicitation was posted on November 12, 2026, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Solicitation SPE8E9-26-T-3881 is a request for quotations issued by DLA Troop Support for the procurement of seven titanium metal sheets. The required specifications are 0.050 inches thick, 36 inches wide, and 96 inches long, with an approximate weight of 28.16 lbs per sheet. Material must be supplied in whole feet lengths only and must conform exactly to the described dimensions, as test coupons are strictly prohibited. The procurement adheres to standards SAE AMS4901V and SAE AMS2809B Revision B. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict quality and identification requirements, including a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Each sheet must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, alloy, and manufacturer details. Packaging must comply with MIL-STD-2073-1E and RP001, utilizing robust four-corner and fiberboard protection. Delivery is required within 160 days after order, with an original required delivery date of December 16, 2026, shipped FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination.

General Info

DLA Troop Support seeks seven titanium sheets from QSLD suppliers by December 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

View Full Breakdown

Timeline

PhaseClosed

PostedSep 23

Solicitation

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 12:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressUSA

Contacts

Matthew Kruc

Full Description

SHEET,METAL
METAL SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TITANIUM
0.050 IN THK 36 IN W 96 IN LG
28.16 LB/SH (REF)
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
SPE8E9-26-T-3881
SECTION B
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 2 IAW BASIC NON GOVT STD SAE AMS4901V REVISION NR V DTD 02/25/2025 PART PIECE NUMBER: HOT ROLLED,ANLD, DESCALED O/A
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025
SPE8E9-26-T-3881
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2809B REVISION NR B DTD 05/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018365236 0001 SH 7.000
NSN/MATERIAL:9535011308557
DELIVERY (IN DAYS):0160
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
- ROBUST FOUR CORNER MATERIAL PROTECTION
- FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
- FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
SPE8E9-26-T-3881
SECTION B
PR: 7018365236 PRLI: 0001 CONT’D
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/15/2027 Original Required Delivery Date:12/16/2026
SPE8E9-26-T-3881 NSN/Part Number: 9535-01-130-8557 Quantity: 7 SH Purchase Request: 7018365236QTY: 7 Delivery: 160 days ADO