This Award Notice opportunity from Department Of Defense was posted on October 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SHEET, METAL

Awarded

SPE8E9-26-T-3876Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331315

New

DIBBS

Supply of Aerospace Grade Raw Material for Structural PlatesThis subcontract involves the supply of aerospace grade raw material billets or sheets for prime contractors working on DLA Weapons Support ASC projects. The selected provider must source materials that strictly adhere to the alloy and temper requirements specified in Drawing 81205 39-10779 and ensure full material traceability through the provision of Mill Test Reports. All materials must be delivered directly to the fabrication facility and comply with the Buy American Act. The opportunity is a total small business set-aside under NAICS code 331315 for the Department of Defense. Performance will take place at Tinker AFB, and the response deadline for this requirement is November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves performing first article testing and quality validation for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for producing a single test unit and coordinating its validation at the First Article Test Lab located at Robins Air Force Base in accordance with QAP 16236. To ensure access to necessary technical data, the contractor must maintain JCP certification. The final deliverables for this project include one validated First Article unit and a corresponding test approval report. The opportunity is categorized under NAICS code 331315 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 20, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Aircraft-Grade Aluminum Plate StockThis subcontract involves the supply of raw aircraft-grade aluminum plate stock to prime contractors supporting the Department of Defense, specifically for DLA Weapons Support ASC components. The material must be certified aluminum alloy meeting Boeing part number L3223818-011 specifications and must be delivered with full heat lot traceability, Mill Test Reports, and certificates of conformance. The contract requires strict adherence to the Buy American Act and the Berry Amendment to ensure regulatory compliance. Performance for this requirement is centered at Tinker AFB, and the procurement falls under NAICS code 331315.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0484

Solicitation SPE8E9-27-T-0484 is a total small business set-aside for the procurement of 120 aluminum Alclad 2024 TMPR T3 metal sheets. The required specifications include a thickness of 0.063 inches, a width of 60 inches, and a length of 144 inches, with a cladding thickness of 0.0016 on both sides. The order is split between two delivery locations: 70 sheets to DLA Distribution Depot Oklahoma at Tinker AFB and 50 sheets to DLA Distribution Warner Robins. Delivery is required within 51 days, with an original required delivery date of November 5, 2026. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict dimensional conformity is required, and test coupons are prohibited. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, and manufacturer details, applied via stamping or stenciling. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements, ensuring robust four-corner and edge protection.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-030Y

This solicitation, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 190 screw thread inserts under NSN 5325-01-089-9371. The delivery is required 167 days after the award, with a need ship date of May 4, 2027, and a final delivery date of July 9, 2027. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. Inspection and acceptance will occur at the destination, with the government serving as the responsible party. The contract is subject to strict technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to RP001, MIL-STD-2073-1E, and MIL-STD-129, with a total prohibition on the use of mercury or mercury compounds. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SV0120-27

UNICOR, Federal Prison Industries, Inc., is soliciting quotes for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of 3105-H14 aluminum blanks. This requirement, identified as solicitation SV0120-27, is a 100% set-aside for small businesses under NAICS 331315. The contract includes three specific line items for aluminum sheets of varying dimensions and corner radii, with total quantities ranging from 1,000 to 50,000 units per item. The government provides a guaranteed contract minimum of 40,000 units, with individual delivery orders ranging between 4,000 and 10,000 units. All materials must be delivered FOB Destination to the UNICOR facility in Cumberland, Maryland, and packaging must comply with ASTM D-3951-95 standards. Proposals are due by November 13, 2026, at 2:00 PM EST and must be submitted to Contract Specialist Wesley Newell. Evaluation will be based on technical specifications, price, past performance, and delivery time, with technical specifications and past performance weighted as more important than price. Required submission documents include a signed SF1449 with line-item pricing, technical descriptions, country of origin, and three business management questionnaires to verify past performance. While the Buy American Act applies, the aluminum is not required to be rolled or manufactured in the United States. Awardees must be registered in the System for Award Management (SAM) and adhere to specific Department of Justice cybersecurity and privacy training requirements.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Red River Army Depot Sale of Scrap Material Aluminum Plates

Solicitation # W911RQ27QSP02

Red River Army Depot is conducting an all-or-none sale of approximately 21,500 lbs of aluminum plate, primarily 6061 grade with various thicknesses and cut outs. This small business set-aside opportunity is offered as is and where is, with the buyer responsible for all packing, removal, and transportation from the installation in Texarkana, Texas. Pricing is based on the buyer's index percentage for aluminum scrap old aluminum sheet and cast-US (MB-AL-0370) per the AMM market index. The buyer must provide their own roll-off dumpsters or flatbeds and adhere to the AWCF Scrap Pickup Process, which involves a specific weighing sequence to determine the final invoice based on tare and loaded weights. Payment must be made in full via Pay.gov prior to the removal of any materials. The government requires a bid deposit of 20 percent of the total bid, and failure to perform may result in liquidated damages of 20 percent of the contract price. The government reserves the right to vary the quantity or weight delivered by 50 percent or withdraw property if a bona fide requirement develops. The buyer assumes all liability for dangerous property and is responsible for the immediate cleanup and reporting of any hazardous material spills occurring on-site. Bidders must be at least 18 years of age and not federal employees, and the award will be granted to the responsible bidder providing the most advantageous terms to the government.

POSTED

DEADLINE

Aerospace-Grade Aluminum SupplyThis subcontract for Aerospace-Grade Aluminum Supply supports prime contractors working on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work involves the sourcing and delivery of certified raw aluminum stock that strictly adheres to the chemical and physical properties outlined in SAE AS5174F and SAE AS4841. To ensure quality and traceability, the provider must supply Mill Test Reports and maintain full compliance with the Buy American Act. The performance of this contract is centered at Robins Air Force Base. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026. The requirement falls under NAICS code 331315, focusing on the provision of specialized aerospace-grade materials.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aluminum Alloy Sheet Supply (Alloy 5052)This subcontract involves the supply of 5,000 aluminum alloy sheets to prime contractors supporting DLA Troop Support Construction and Equipment metals contracts. The required materials are Alloy 5052, Temper H34, with specific dimensions of 0.080 inch thickness, 36.00 inches in width, and 96.00 inches in length. All supplies must adhere to SAE AMS-QQ-A-250/8C standards, and shipping and marking must comply with MIL-STD-129. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract requires a Certificate of Quality Compliance or Mill-Material Certification to accompany every shipment. The performance location is situated in New Cumberland, Pennsylvania, under NAICS code 331315. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Aviation Covers (NSN 1680-LL-NC1-8134)This subcontract involves the manufacture or procurement of eight specialized aviation covers meeting NSN 1680-LL-NC1-8134 specifications for prime contractors supporting the Department of Defense DLA Fleet Readiness Center. The scope of work requires strict adherence to packaging standards ASTM D3951 and RP001, with shipment marking conducted according to MIL-STD-129 and MIL-STD-130N(1). Quality assurance must be performed using sampling methods from MIL-STD-1916 or ASQ H1331, and safety data sheets must be provided for any hazardous materials in compliance with 29 CFR 1910.1200(g). The project is categorized under NAICS code 331315 and will be performed in Cherry Point, zip code 28533-0021. Interested parties should note the response deadline of November 13, 2026, for this DLA PSC agency requirement.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Aluminum Alloy Sheet SupplierThis subcontract involves the supply of 100 aluminum alloy sheets measuring 0.080 inches thick, 48 inches wide, and 96 inches long to support prime contractors delivering on Department of Defense contracts. The materials must be delivered FOB Origin to DLA Dist San Joaquin in Tracy, California. To ensure compliance, the supplier must be listed under QSLD or QSLM and provide Mill-Material Certification with every shipment. All products must adhere to strict packaging and marking standards, specifically ASTM B660, MIL-STD-2073-1E, and MIL-STD-129R(3).

POSTED

DEADLINE

Titanium Alloy Sheet Supplier (QSLD Certified)This subcontract involves the supply of three hot rolled, annealed, and descaled titanium alloy sheets measuring 0.0800 by 36.00 by 96.00 inches. These materials are intended for prime contractors supporting DLA Troop Support Construction and Equipment contracts and must strictly adhere to SAE AMS4911T, SAE AMS2809B, and SAE AMS4907M standards, as well as QAP 13873. The supplier must hold QSLD certification and ensure all items are marked according to MIL-STD-2073-1E and MIL-STD-129. Deliveries must include Mill-Material Certification and be coordinated through the Department of Defense agency in Warner Robins, with performance taking place at Robins Air Force Base.

WARNER ROBINS

POSTED

5 days ago

DEADLINE

in 5 days

AI Contract Overview

Solicitation SPE8E9-26-T-3876 is a Request for Quotations issued by DLA Troop Support for the procurement of 80 aluminum Alclad metal sheets under NSN 9535002327535. The required material is Alclad 7075 Temper T6 with a thickness of 0.032 inches and a cladding thickness of 0.0013 inches on both sides. Each sheet must measure 48 inches wide by 144 inches long, with a reference weight of 22.33 lbs per sheet. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a required delivery date of September 23, 2026, and a delivery window of 52 days after order. Compliance with strict technical and quality standards is mandatory, including ASTM B660, ASTM B666/B666M-20, and SAE AMS4049N. A Certificate of Quality Compliance is required for every shipment, and no sheets will be accepted unless they conform to exact dimensions; test coupons are prohibited. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129 and include specific continuous identification such as the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the destination per FAR 52.246-2.

General Info

DLA Troop Support seeks 80 Alclad 7075 aluminum sheets by September 23, 2026.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$11,268.8

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Awardee

PIERCE ALUMINUM COMPANY, INC.

Award Issued Date

10/07/2026, 12:00:00 AM UTC

Documents

award

High

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseAwarded

PostedSep 23

Solicitation

AwardedOct 7

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Matthew Kruc

contact@example.gov

+1 (555) 000-0000

Full Description

DLA award SPE8E927V0035 posted on DIBBS. Awardee: PIERCE ALUMINUM COMPANY, INC. (CAGE 3L672) Total Contract Price: $11,268.80 Award Date: 10-07-2026 Solicitation: SPE8E9-26-T-3876 Line items: - SHEET, METAL (NSN/Part 9535002327535, PR 7018487008)