Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHEET, METAL

Active
SPE8E4-26-Q-0327Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of three aluminum alloy alclad metal sheets, each 0.063 inches thick, 48 inches wide, and 144 inches long, weighing approximately 43.545 pounds per sheet, with strict adherence to dimensional tolerances and no tolerance for test coupons. The material must conform to SAE AMS4100G Revision G dated January 1, 2024, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper of T761 and alloy designation of 7475, as defined in the Technical Data Package. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution, potentially resulting in criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Contracting Officer. Continuous identification markings are required on each sheet, including the DLA contract number, NSN, specification revision, alloy, grade, manufacturer, heat and lot number, and exact dimensions, applied via stamping or stenciling in legible, waterproof, non-contaminating ink. Materials must be shipped in whole-foot lengths only with packaging strictly following MIL-STD-2073-1E, Level A requirements under ASTM B660, and MIL-STD-129R for labeling, including robust edge and corner protection and full surface coverage with fiberboard or equivalent material. Deliveries are due within 30 days after award date, shipped FOB origin to Warner Robins AFB, GA, with inspection and acceptance occurring at destination under a firm fixed price with zero quantity variance. Government identification must be removed from non-accepted supplies, and all documentation must be submitted in accordance with CDRL-METALSCERT requirements as referenced in the DLA Master List of Technical and Quality Requirements.

General Info

Three 7475-T761 aluminum sheets, SAE AMS4100G compliant, shipped FOB origin to Warner Robins AFB, certified, labeled, and packaged to MIL-STD standards.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8E4-26-Q-0327.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Denise Boyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET, METAL ALUMINUM ALLOY ALCLAD 0.063 IN THK<(>,<)> 48.00 IN W<(>,<)> 144.00 IN LG 43.545 LB/SH(REF)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors
SPE8E4-26-Q-0327
SECTION B
SUPPLY/SERVICE: 9535-01-473-4502 CONT'D
(QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO) No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS4100G REVISION NR G DTD 01/01/2024 PART PIECE NUMBER: ALLOY ALCLAD 7475 TEMPER T761
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14153 01735 REVISION NR A DTD 05/09/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
SPE8E4-26-Q-0327
SECTION B
SUPPLY/SERVICE: 9535-01-473-4502 CONT'D
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9535-01-473-4502 3.000 SH $ ______________ $ ______________ SHEET,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:00 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
WHEN PREP FOR DELIVERY REQUIREMENTS SPECIFY CODE ZZ, PACKAGING SHALL BE IN ACCORDANCE WITH LEVEL A REQUIREMENTS OF ASTM B660 AND DISC DRAWING NUMBER 01735 PRESERVATION ZZ = IAW ASTM B660 MARKING Z = IAW ASTM B666 AND ADDITIONAL REQUIREMENTS STATED IN THE PURCHASE ORDER TEXT(POT).
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
- ROBUST FOUR CORNER MATERIAL PROTECTION
- FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
- FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS 455 BYRON STREET BLDG 376 ROBINS A F B GA 31098-1887 US
SPE8E4-26-Q-0327
SECTION B
SUPPLY/SERVICE: 9535-01-473-4502 CONT'D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS 455 BYRON STREET BLDG 376 ROBINS A F B GA 31098-1887 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7015394946 0001 N/A N/A N/A 06/23/2026

SPE8E4-26-Q-0327 NSN/Part Number: 9535-01-473-4502 Quantity: 3 SH Purchase Request: 7015394946QTY: 3 Delivery: 30 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331315
New
DIBBS
SHEET, METALThe contract specifies the procurement of 23 sheets of aluminum alloy metal, each 0.125 inches thick, 36 inches wide, and 144 inches long, weighing 64.80 pounds per sheet, with the NSN 9535-00-684-4551. The material must conform to SAE AMS4268 Revision B, SAE AMS-QQ-A-250/4B, and ASTM B666/B666M-20 standards, with a temper designation of T81. All shipments require a Certificate of Quality Compliance, including mill certification, with a copy provided to the DLA Troop Support Contracting Officer with every delivery. Each sheet must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and exact dimensions using stamping or stenciling that is legible, waterproof, and noncontaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes. Sheets must be supplied in whole foot lengths only. Packaging must comply with ASTM B660-23 Level A and MIL-STD-2073-1E, including robust four-corner and full-edge protection, fiberboard or better top and bottom coverage, and adherence to PREP FOR DELIVERY code ZZ. Markings must also include both units of measure when applicable and conform to MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from the QSLD requirement constitutes an exception that must be clearly stated. Products not sourced through an approved QSLD distributor are considered unauthorized substitutions and may result in criminal penalties. Compliance with the QSL program waives the need for government inspection, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements. The contract mandates firm fixed pricing with no tolerance for quantity variance, delivery within 90 days after order date, and destination point inspection and acceptance. The material will be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, with packaging and transport governed by DLA-specific procedures. The solicitation was issued under SPE8E9-26-Q-0627 with a response deadline
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METALThe contract specifies the procurement of aluminum metal sheets with precise technical and quality requirements, including material specifications of Alclad 7075-T6 with 0.0016 inch cladding on both sides, 0.040 inch thickness, 36 inch width, and 144 inch length, weighing approximately 20.95 pounds per sheet. All sheets must conform exactly to the stated dimensions with no tolerance for test coupons, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full fiberboard coverage top and bottom, and marking in accordance with MIL-STD-129, with dual-unit quantity labeling where applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Non-compliance with QSLD rules constitutes an unauthorized substitution and may trigger criminal penalties. This solicitation waives government inspection requirements for approved QSLD suppliers, relying instead on mill certifications and compliance with referenced standards including SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23. Material must be delivered within 55 days of award, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at destination, with FOB origin terms. Two separate line items total 70 sheets, destined for Tinker AFB, OK and San Diego, CA, with a required ship date of July 9, 2026. All documentation, including Certificates of Quality Compliance and marking details, must align strictly with the referenced Technical Data Package and DLA Master List of Technical and Quality Requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331315
New
DIBBS
ALUM SH 2024-T3-BARE-.The contract specifies the procurement of 312 linear feet of aluminum sheeting compliant with AMS-QQ-A-250/4 (2024-T3-BARE), measuring 0.032 inches in thickness, 48 inches in width, and 12 feet in length, with PVC coating on both sides. All material must originate from the same heat lot and include required certifications upon delivery. The item is to be packaged per ASTM D3951, marked and labeled according to MIL-STD-129, and palletized in accordance with RP001 DLA packaging requirements. The unit of issue is linear feet, with no variance allowed in quantity—exactly 312 feet must be delivered. The pricing is firm fixed, with inspection and acceptance occurring at the destination. Delivery is required within seven calendar days after award, and the shipment must be sent to the designated DLA receiving facility at Naval Base Coronado in San Diego, California. The government-provided delivery target date is September 23, 2026, under solicitation SPEFA1-26-Q-0095, with the purchaser identified as DLA Fleet Readiness Southwest. All technical and quality standards mandated by the DLA Master List supersede any conflicting ASTM requirements.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
SEAL KIT, DOORThe contract specifies the procurement of a SEAL KIT, DOOR with NSN 5411015301005, supplied as a single kit per unit of issue (KT), with a total quantity of three units required under separate CLINs. The item is classified as a TYPE I (CODE H) with a strict 12-month non-extendable shelf life, and the manufacturer’s date must be provided. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and containment standards, while marking follows MIL-STD-129 with no special codes. Palletization adheres to DLA’s procurement requirements, and shipment must be delivered FOB origin within five days via traceable freight methods, excluding parcel post, to the designated military address at Fort Riley, Kansas. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The item is covered under defense information protocols and incorporates technical and quality standards referenced from the DLA Master List. The required delivery date is July 24, 2026, and the contract is issued under solicitation SPE8E5-26-T-3690 by the Defense Logistics Agency for the Department of Defense.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331315
New
DIBBS
SEAL KIT, DOORThe contract is for a SEAL KIT, DOOR with NSN 5411-01-530-1017 and part number 16505516, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3691. One thousand units are required to be delivered within five days of award, FOB origin, with zero variance in quantity, and inspection and acceptance occur at the destination. The item is classified as a TYPE I (CODE H) shelf-life item with a non-extendable 12-month shelf life, and the manufacturer’s date must be clearly marked. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, container types, and no special markings. Palletization follows DLA packaging standards and the shipment is to be sent via traceable freight, excluding parcel post, to Fort Riley, Kansas. The delivery is destined for the 2nd ABCT, 1st ID AWCF SSF, and the shipment must be tracked using the RDD N and TCN W81WRE62020139. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and covered defense information restrictions apply. The original required delivery date is July 24, 2026, and the contract is under a federal solicitation with NAICS code 331315.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331315
New
Federal
359TRS METAL BOND COURSE PANELThe solicitation FA302026Q0073 is a combined synopsis and solicitation for commercial items issued by the 82d Contracting Squadron at Sheppard Air Force Base, Texas, to acquire 35 Metal Bonded Course Training Panels for delivery to 359 TRS Det 1 at NAS Pensacola, Florida. The requirement is set aside 100% for small business concerns under NAICS code 331315, with a size standard of 1,400 employees, and will be awarded as a single Firm Fixed Price contract. All responses must adhere to the "Combo RFQ" format and be submitted via email to the designated contracting officer and point of contact by the updated deadline of 2:00 PM Central Time on 31 July 2026, with all questions due by 10:00 AM Central Time on 29 July 2026. Technical specifications are detailed in Attachment 1, and all proposals must include a completed price quotation and a separate technical submission, with PDF being the strongly preferred and likely required file format. The contract will be evaluated based on technical capability, price, delivery terms, and past performance, with no numerical weights assigned; the award will likely follow a trade-off approach rather than LPTA. Delivery is FOB NAS Pensacola, and all invoicing must be submitted electronically through the Wide Area WorkFlow system using the appropriate document types. The Government will conduct acceptance at the delivery location, and compliance with multiple FAR and DFARS clauses is required, including restrictions on hexavalent chromium, Buy American provisions, prohibitions on procurement from the Xinjiang Uyghur Autonomous Region and the Maduro regime, and cybersecurity measures. Offerors must hold a current Unique Entity ID and CAGE code, and affirmatively represent their small business status and socioeconomic designations; failure to comply with these representations may disqualify a proposal. Additionally, the contract includes options under FAR 52.217-8 and 52.217-9, with all pricing for options required to be submitted and evaluated as part of the base quote, and the Government reserves the right not to exercise any options. No packaging, preservation, or marking standards are explicitly defined beyond referencing DoDAAC, NSN, and WAWF identifiers, and no key personnel or organizational conflict of interest clauses are specified.
FA3020 82 Cons Lgc

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 331315
New
DIBBS
Supply of 7075-T6 Aluminum Sheet with MRS TreatmentThe contract calls for the supply of 144 linear feet of 7075-T6 aluminum sheet, 0.063 inches thick and 48 inches wide, featuring a clad surface and treated to achieve minimum residual stress to ensure dimensional stability and structural integrity. The material must comply with AMS-QQ-A-250/18 Revision B specifications, ensuring it meets stringent aerospace-grade quality and mechanical property standards. All units must be packaged per DLA RP001 guidelines and labeled in accordance with MIL-STD-129 to guarantee proper identification, traceability, and handling throughout the supply chain. Delivery is F.O.B. destination, meaning the supplier assumes all responsibility and cost for transportation until the goods reach the specified delivery point. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a response deadline of July 30, 2026, and is classified under NAICS code 331315 for aluminum rolling, extruding, and drawing.
DLA FLEET READINESS CENTER DLA PSC

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 331315
New
DIBBS
SHEET ALUM MRS CLAD ONThe contract specifies the procurement of aluminum sheet material compliant with AMS-QQ-A-250/18, designated as 7075-T6 alloy, with dimensions of 0.063 inches thick by 48 inches wide by 144 inches long, featuring one-side cladding and mandatory minimum residual stress (MRS) treatment. The total quantity required is 144 linear feet, priced under a firm fixed-price term with zero tolerance for quantity variance. Deliveries must be made to the destination within 10 days after order issuance, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements to prevent damage during transit, and a Certificate of Quality Conformance must accompany each shipment. Material is identified by part number 9535-LN0031523 and NSN 9535-LN-003-1523, linked to purchase request 7017475495, with a required ship date of September 12, 2026. The solicitation number is SPEFA5-26-Q-0057, issued by the Defense Logistics Agency Fleet Readiness Center, with delivery addressed to the designated facility in Cherry Point, North Carolina, and contractual obligations bound by the DLA Master List of Technical and Quality Requirements.
DLA FLEET READINESS CENTER DLA PSC

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 331315
New
DIBBS
NET, CARGO 30 HAZThe contract involves the procurement of 41 units of NET, CARGO 30 HAZ with NSN 5411-01-529-9219, sourced from BOH ENVIRONMENTAL, L.L.C. with CAGE code 1NSG3. The item is designated as an exact product, meaning only the specified part number and entity are acceptable per the purchase order text, aligning with DLA regulations that restrict substitutions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. There is no shelf life requirement for this material. The solicitation number is SPE8E5-26-T-3669, posted on July 22, 2026, with responses due by August 3, 2026, and is a Total Small Business Set-Aside under FAR 19.5. The North American Industry Classification System code is 331315, and the contracting agency is the Department of Defense, specifically the Red River Receiving Bldg, with performance required at Texarkana, Texas, ZIP 75507-5000. Delivery must occur within 167 days after order, and the point of contact is Don Trachtman, reachable via email and phone provided. The procurement is managed through the DIBBS system and is part of a federal acquisition stream under strict compliance with DLA procedural mandates.
RED RIVER RECEIVING BLDG

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
NET, CARGO 48 FLOORThe contract pertains to the procurement of 35 units of NET, CARGO 48 FLOOR identified by NSN 5411015299217 under solicitation SPE8E5-26-T-3672, issued by the Defense Logistics Agency District San Joaquin. Delivery is required FOB origin within 167 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The units must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, packaging materials, and unit containment standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging requirements, and transportation logistics are governed by DLA procedural notes C19 and C20. The item is subject to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and covered defense information protocols may apply. The contract price is set at $35.00 per unit, totaling $1,225.00, with the original delivery deadline set for January 4, 2027 and a needed ship date of January 18, 2027. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 331315, and the primary point of contact is Don Trachtman.
DLA DIST SAN JOAQUIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331315
DIBBS
Aluminum Sheet Manufacturing & SupplyThe contract entails the manufacture and delivery of twenty aluminum alloy ALCLAD sheets compliant with military and ASTM standards, ensuring rigorous quality and material integrity. Each sheet must be produced with full traceability from raw material sourcing through final fabrication, accompanied by comprehensive certification documentation to verify adherence to specified technical requirements. Government inspection is mandatory at multiple stages, including incoming material verification, in-process checks, and final acceptance, to guarantee compliance with defense-grade performance criteria. The work is performed under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense, with the NAICS code 331315 indicating classification under aluminum sheet and plate manufacturing. Performance is expected to meet stringent defense supply chain protocols, though the exact delivery location and point of contact are not specified in the available data.
Defense Logistics Agency

POSTED

11 days ago

DEADLINE

N/A
View Details
NAICS: 331315
DIBBS
Supply of Corrosion Resistant Coated Aluminum (Chemically Treated)The contract pertains to the supply of two units of chemically treated, corrosion-resistant aluminum, packaged in boxes and fully compliant with federal inspection and sustainability standards. The material is specifically engineered to withstand environmental degradation and meets stringent military-grade specifications for durability and safety. Delivery is structured under F.O.B. destination terms, meaning the supplier assumes all costs and risks until the goods are physically delivered to the designated location, ensuring the buyer receives the product in optimal condition. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 331315 indicating classification within aluminum production and processing. The solicitation was posted on July 14, 2026, and is managed through the DIBBS procurement portal, reflecting its integration into the DoD’s supply chain infrastructure. Although no specific point of contact, place of performance, or set-aside details are provided, the inclusion of federal compliance and sustainability mandates underscores a requirement for environmentally responsible manufacturing and transparent logistics aligned with government procurement policies.
Defense Logistics Agency

POSTED

14 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 332911
New
DIBBS
ACTUATOR, HYDRAULIC-The contract specifies the procurement of two hydraulic-pneumatic linear actuators with part number D-8794 and NSN 4810013013269 under solicitation SPE7MC-26-T-156Q, issued by the Defense Logistics Agency for a total small business set-aside. Delivery is required FOB origin within 161 days of award, with a mandatory ship date of January 19, 2027, and an original required delivery date of January 5, 2027. The unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements RP001, unless superseded by higher-priority technical or quality standards listed in the DLA Master List of Technical and Quality Requirements. The deliver point is DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLAD Proc Notes C19 and C20. The total contract value is based on a unit price of $0.00 per item, resulting in a total of $0.00, indicating this may be a placeholder or administrative line item, though the quantity is clearly stated as two units. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 332911, and the primary point of contact is Paula McClary at DLA.
Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC ANGLEThe contract is for the procurement of 14 units of NONMETALLIC ANGLE, identified by NSN 9390-01-212-3827, with performance required under drawing LS34297 and specifications based on MIL-DTL-5015. The material for parts D-2000 and D-15199 is DACRON, and all parts must be identified per MIL-STD-130. The drawing must be interpreted in accordance with ANSI Y14.5M-82. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, within or outside the U.S., with DFARS 252.225-7048 governing access. Only DLA contractors with approved JCP certification, completed export control training, and DLA authorization may access the controlled data. Delivery is scheduled for 141 days ADO, with FOB ORIGIN terms placing transportation risk and costs on the contractor until the goods are loaded at the origin point. Final delivery must be made to SW3119, DLA Distribution Warner Robins, at Robins AFB, GA 31098-1887, where inspection and acceptance by the government will occur. Packaging and labeling must comply with MIL-STD-129 for marking and barcoding, and MIL-STD-130 for part identification, while hazardous materials require adherence to FED-STD-313, TQ IP025, and the OSHA Hazard Communication Standard. Non-hazardous materials follow ASTM D3951 unless overridden by the DLA Master List. Invoices and receiving reports must be submitted electronically through WAWF per DFARS clauses 252.232-7003 and 252.232-7006. Cybersecurity compliance is mandated under 252.204-7012 and 252.240-7997, requiring implementation of NIST SP 800-171 safeguards and submission to DoD cybersecurity assessments. The contract prohibits acquisition of covered telecommunications equipment from Chinese military companies under 252.204-7018 and mandates compliance with multiple other FAR
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
BAR, METALThe contract specifies the procurement of extruded aluminum alloy 7075 in T6 temper, formatted as flat bar with a thickness of 2.500 inches, width of 4.000 inches, and lengths between 10 and 12 feet in whole-foot increments only, with a reference weight of 12.100 pounds per foot. The material must fully comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This procurement is subject to the Qualified Suppliers List for Distributors requirement, limiting eligibility to suppliers explicitly listed on the QSLD; any deviation must be clearly indicated, and non-compliance may result in rejection, penalties, or criminal liability. Source inspection is waived for QSLD-compliant suppliers, and CDRL-METALSCERT certification is mandatory. Packaging must adhere to MIL-STD-2073-1E with preservation per ASTM B660 and marking per MIL-STD-129. The items are to be delivered FOB origin in 135 days, with a total quantity of 68 feet at $68.00 per foot under solicitation SPE8E4-26-T-1930. A 10% quantity variance is permitted. Critical application status applies, and delivery is to Robins AFB, Georgia, with a required ship date of December 21, 2026, and original delivery due January 3, 2027. All shipments must include dual-unit markings when applicable, and palletization must follow DLA packaging requirements.
Nonferrous Forging

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks a subcontractor to assist the prime contractor in achieving compliance with NIST SP 800-171 standards and preparing for a CMMC Level 2 self-assessment, focusing on the implementation of required cybersecurity documentation and system controls. The work will involve evaluating current security practices, identifying gaps in compliance, and developing or enhancing policies, procedures, and technical controls aligned with NIST guidelines to meet the requirements of CMMC Level 2. The subcontractor is expected to provide expert guidance throughout the assessment preparation process to ensure the prime contractor can successfully demonstrate compliance without external audit. This opportunity is designated as a Total Small Business Set-Aside under the SBA program with a NAICS code of 541512, indicating it is specifically reserved for small businesses in the computer systems design and related services sector. Performance of the contract will occur at Robins Air Force Base, Georgia, with a response deadline of August 6, 2026, and the solicitation was posted on July 26, 2026. The contracting activity is under the Department of Defense, specifically the Warner Robins organization, and the task is part of a broader effort to strengthen cybersecurity readiness across the defense industrial base.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Hazardous Materials Handling & TransportationThe contract pertains to the specialized transportation and handling of hazardous materials such as lubricants and preservatives used in conjunction with valves, requiring strict adherence to federal regulations including DOT, OSHA, and DLAD Proc Notes C19 and C20. All activities must be performed in full compliance with safety and environmental standards to ensure the secure movement and management of these materials, with the primary place of performance specified as Robins AFB, Georgia, 31098-1887. This is a subcontract solicitation under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and it is classified under NAICS code 484220 for truck transportation of hazardous materials. The solicitation was posted on July 26, 2026, with a mandatory response deadline of August 6, 2026, and is managed under the Department of Defense by the Warner Robins office.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332439
New
DIBBS
Military-Grade Packaging & Preservation ServicesThe contract requires the provision of Level A1 preservation and packaging services in strict accordance with MIL-STD-2073-1E and labeling that meets the specifications of MIL-STD-129 for the shipment of military hardware to the Defense Logistics Agency. All work must ensure long-term protection against environmental degradation during transport and storage, with precise adherence to military standards for materials, methods, and documentation. The packaging must be designed for secure handling, transit, and long-term readiness in operational environments, and labeling must include all required data elements to support accurate identification, inventory control, and distribution. This is a total small business set-aside subcontract under NAICS code 332439, open exclusively to qualified small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and performance is to be conducted at Robins Air Force Base, Georgia, with a specific zip code of 31098-1887. The contracting activity falls under the Department of Defense, managed by the Warner Robins office, and all deliverables must be fully compliant with federal military logistics standards to support DLA’s supply chain requirements.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332913
New
DIBBS
Precision Valve Manufacturing & SupplyThe contract calls for the manufacture and supply of 23 precision fluid pressure regulating valves identified by NSN 4820009833598, engineered to meet strict military specifications ensuring complete form, fit, function, and durability under operational conditions. All units must be produced to exacting standards required for use in defense systems, with a focus on reliability and performance in demanding environments. The work is to be performed at Robins AFB, Georgia, with delivery and compliance verification tied to the contract’s fulfillment requirements. This is a small business set-aside subcontract under FAR 19.5, reserved exclusively for small businesses, and falls under NAICS code 332913 for other fabricated metal product manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense through the Warner Robins office. Participation is restricted to qualified small business entities capable of meeting military-grade quality and production timelines, and the contract is accessible via the DIBBS online platform for registered vendors.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUIDThe contract is for the procurement of a regulating fluid valve with part number 0311016-000 and NSN 4820009833598, supplied by ARKWIN INDUSTRIES, INC., under solicitation SPE7MC-26-T-155K. A total of 23 units are required at a unit price of $23.00, with delivery scheduled 504 days after award and FOB origin as the delivery term. Inspection and acceptance points are both at destination, and packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special markings required, and palletization follows DLA packaging requirements. The item is classified as a critical application and subject to CMMC Level 2 self-assessment, with cybersecurity and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 332912, with a response deadline in August 2026 and primary point of contact at Warner Robins DLA. Delivery must be shipped to DLA Distribution at Robins AFB, Georgia, with transportation instructions referencing DLAD Proc Notes C19 and C20.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
BATTERY POWER SUPPLYThe contract is for the procurement of 19 units of a battery power supply identified by NSN 6130-01-525-0952, issued under solicitation SPE7L7-26-T-4297 as a total small business set-aside. The item requires delivery to Robins Air Force Base, Georgia, with a delivery window of 431 days after order and a mandatory ship date of September 29, 2027. The packaging and handling of the item must fully comply with MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking, labeling, and barcoding, and must include dry storage conditions with a strict 24-month non-extendable shelf life. The shipment is subject to FOB origin terms and must be invoiced exclusively through the Wide Area WorkFlow system using an invoice and receiving report combo format. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and distribution is restricted to DLA contractors with approved JCP certification, completed training, and formal authorization to access controlled technical data. The contractor must ensure all hazardous materials are labeled per 29 CFR 1910.1200 and must notify the Contracting Officer in writing prior to shipment if any component contains radioactive materials exceeding specified thresholds. All offers must be submitted electronically via DIBBS by the July 29, 2026 deadline and must include a valid Unique Entity ID and CAGE code. The contractor must affirm small business status and complete all required representations, including compliance with clauses on employment eligibility, equal opportunity, combating trafficking, and whistleblower rights. The contract incorporates DFARS clauses requiring NIST SP 800-171 compliance for cybersecurity, and mandates that the manufacturer be certified as a CMMC Level 2 accredited third-party assessment organization. No pricing details are confirmed beyond the quantity and extended value of $19.000, and the basis of award remains unspecified. The contractor is responsible for ensuring conformity to all inspection criteria at the destination point, with acceptance governed by zero non-conformance requirements for critical attributes and sampling standards aligned with MIL-STD-1916 and ASQ standards.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 541380
New
DIBBS
Bar-Coding and Asset Tracking ImplementationThe contract requires the implementation of barcoding and asset tracking systems for military shipments and units in strict compliance with MIL-STD-129 standards, specifically applying Data Matrix and Code 128 barcodes to ensure accurate logistics visibility and asset accountability across the Department of Defense supply chain. All labeling and marking must meet federal military specifications to enable seamless tracking from point of origin through final delivery, supporting end-to-end supply chain management and operational readiness. This is a small business set-aside subcontract under NAICS code 541380, designated exclusively for total small business participation as defined by the SBA. The work is performance-based at Robins AFB, Georgia, with a response deadline of August 3, 2026, and an posting date of July 23, 2026. The solicitation is managed by the Warner Robins office under the Department of Defense, and the contract will be awarded through the DIBBS system, with full compliance expected for all technical, administrative, and regulatory requirements tied to military logistics labeling and tracking protocols.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Information SafeguardingThe contract requires implementation of NIST SP 800-171 controls to protect covered defense information and ensure full compliance with DFARS 252.204-7012, encompassing robust cyber incident reporting procedures and strict access controls to safeguard sensitive data. All obligations must be met to align with federal cybersecurity standards for defense contractors handling controlled unclassified information. This is a small business set-aside subcontract under NAICS code 541512, issued by the Department of Defense through the Warner Robins office, with performance required at Robins Air Force Base, Georgia. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026, with the opportunity exclusively reserved for small businesses as defined by the SBA.
Computer Systems Design Services

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires the preparation of hazard warning labels and Material Safety Data Sheets for hazardous materials used in power supplies, with strict adherence to OSHA 29 CFR 1910.1200 and MIL-STD-129 standards. All documentation must accurately communicate chemical hazards, handling procedures, and safety precautions to ensure workplace compliance and regulatory alignment. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid. The North American Industry Classification System code 541690 indicates the scope falls under other scientific and technical consulting services, emphasizing the technical and regulatory nature of the deliverables. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and performance is to occur at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The contracting entity is the Department of Defense through its Warner Robins office, indicating this work supports military or defense-related power supply systems. While specific contact details are not provided, bidders must ensure their submissions reflect full compliance with both federal safety regulations and military labeling standards, including proper formatting, content accuracy, and traceability of hazardous components within the power supply units.
Other Scientific and Technical Consulting Services

POSTED

5 days ago

DEADLINE

in 6 days
View Details