SHEET, METAL

SHEET,METAL
SHEET, METAL
STEEL, COMP 1009
COLD ROLLED, ANNEALED
0.1196 IN THK
55.378 TO 55.498 IN WIDTH
46.002 TO 46.122 IN LENGTH
0.125 IN PERFORATION DIAMETER
0.188 IN C TO C, STAG 60 DEGREE
DISTANCE FROM FIRST HOLE CENTERLINE TO END
ALONG LENGTH 0.538 TO 0.658 IN MAX
DISTANCE FROM FIRST HOLE CENTERLINE TO END
ALONG WIDTH 2.038 TO 2.158 IN MAX
12 LB/SHEET (REF)
EACH SHEET TO BE MARKED WITH ONE LABEL EVERY 3
FEET ALONG THE LENGTH OF THE SHEET. THE LABELS
SHALL BE AS SPECIFIED IN PARAS 5.1.3.1 & 5.1.3.2
WITH DATA AS SPECIFIED IN PARA 4.2.1 OF
MIL-STD-129
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
SPE8E4-26-T-2238
SECTION B
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE8E4-26-T-2238
SECTION B
TDP Rev A Gen 2 IAW BASIC NON GOVT STD ASTM A1008/A1008M-25 REVISION NR DTD 12/01/2025 PART PIECE NUMBER: COMP 1009, COLD ROLLED, ANNEAL
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD ASTM A568/A568-90B REVISION NR DTD PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2807C REVISION NR C DTD 05/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016518387 0001 SH 1.000
NSN/MATERIAL:9515012019064
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700
SPE8E4-26-T-2238
SECTION B
PR: 7016518387 PRLI: 0001 CONT’D
MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
The unpreserved item(s) shall be protected from physical damage and mechanical malfunction. Cushioning materials, dunnage, blocking and bracing shall be applied as required to protect the item (s) and the enclosing media and restrict the movement of the item within the container. The materials selected for all blocking and bracing, and the design and application thereof, shall be compatible with the item and its bearing load limitations. Materials shall be as clean and as dry as practicable.
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
BULK BREAK POINT:
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
FORT CAMPBELL KY 42223-5000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34XC561140618
RDD: 555
PROJ: 0D0 TP 2
SUPP ADD: W9046W SIG: C
SPE8E4-26-T-2238
SECTION B
PR: 7016518387 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:04/29/2026
SPE8E4-26-T-2238 NSN/Part Number: 9515-01-201-9064 Quantity: 1 SH Purchase Request: 7016518387QTY: 1 Delivery: 10 days ADO