SHEET METAL SS3031 AMS
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPEFA5-27-Q-0031 is a small business set-aside, fixed-price request for quotations for 144 inches of sheet metal (NSN 9535-LLNCA7304). The material must be steel corrosion 30301 with dimensions of .032 x 36 x 120, conforming to specification AMS5517 Rev. M. Delivery is required 30 days after order (ADO) with FOB Destination, shipping to the Fleet Readiness Center DLA in Cherry Point, NC. A Certificate of Quality Conformance is mandatory, and the material must be packed to prevent damage in accordance with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. The government will determine the best value based on a comparative assessment of price, past performance, and quoted delivery, with SPRS assessments weighted most heavily. All invoicing and receiving reports must be processed electronically through Wide Area Workflow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on contracting with entities that use certain internal confidentiality agreements. Quotations must be submitted by November 17, 2026.
General Info
Place of Performance
NC, 28533-0021, USASet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9535-LLNCA7304 144.000 IN $ ______________ $ ______________ SHEET METAL SS3031 AMS5517
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SPEFA5-27-Q-0031
SECTION B
SUPPLY/SERVICE: 9535-LLNCA7304 CONT'D
N01DLA
FLEET READINESS CENTER DLA PSC 8021 CHERRY POINT NC 28533-0021 US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA BEACHEY ROAD, BUILDING 148, BAY C CHERRY POINT NC 28533-5040 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7018805758 0001 N/A N/A N/A 11/26/2026
SPEFA5-27-Q-0031 NSN/Part Number: 9535-LL-NCA-7304 Quantity: 144 IN Purchase Request: 7018805758QTY: 144 Delivery: 30 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
Same awarding agency
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS