Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Shield, Heat, Aircraft

Active

FD2030-20-01692Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of a heat shield for aircraft, identified under solicitation number FD2030-20-01692 and posted on October 1, 2020. The contract is managed by the Department of Defense, specifically the Oklahoma DLA Aviation office located at Tinker Air Force Base, Oklahoma. The procurement is conducted as a presolicitation action under the NAICS code 336412, which pertains to aircraft manufacturing. The contract will not be publicly synopsized according to FAR 5.202(a)(13) because the anticipated contract value does not exceed the simplified acquisition threshold. Additionally, the solicitation will be accessible through the Governmentwide Point of Entry (GPE), allowing the public to electronically view and respond to the solicitation. Offerors are permitted to submit their proposals electronically, ensuring a streamlined and open opportunity despite the limited synopsis requirement. The point of contact for this action is available via the provided email address for any inquiries.

General Info

Procurement of aircraft heat shield by DoD, Oklahoma DLA Aviation, limited public synopsis.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

1

MQR-PSD-1+9+Aug+16+Expires+9+Aug+2023+TF-33.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhasePresolicitation

PostedJun 26

Sources Sought

Type ChangedOct 1

Sources Sought → Presolicitation

Notice updatedOct 1

Notice details unchanged. Attachments may have changed.

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

SCMSRequirements

contact@example.gov

Full Description

Show more

The proposed contract action will not be synopsized IAW with FAR 5.202(a)(13) for the following reasons: (i) Is for an amount not expected to exceed the simplified acquisition threshold; (ii) The solicitation will be made through a means that provides access to the notice of proposed contract action through the GPE; and (iii) Public is able to respond to the solicitation electronically through the GPE and offerors are permitted to respond electronically.

Similar Contracts

Same NAICS industry code

Diesel Engine Block Assembly SupplierThis subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the supply of four diesel engine block assemblies for prime contractors on government procurement projects. The assemblies must strictly conform to NSN 2815-01-330-8069 and adhere to MIL-STD-129 marking requirements. Additionally, the supplier must comply with FAR 52.246-2 and RQ011 standards regarding the removal of government identification, with delivery terms set as FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Interested parties must submit their responses by November 9, 2026, following the posting date of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Pivot Shaft CoversThis subcontract involves the manufacture or sourcing of 20 Pivot Shaft Covers, identified by NSN 1615-00-565-5696, to support prime contractors delivering for the DLA Weapons Support Aviation Supply Chain. The selected provider must ensure all units are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129. Performance of the contract will take place in Dulles, Virginia. To be eligible for this requirement, contractors must maintain an active SAM registration and have full access to the Wide Area Workflow system. The opportunity was posted on October 29, 2026, with a response deadline of November 6, 2026. The project falls under NAICS code 336412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract involves providing First Article Testing services for prime contractors working on aircraft component projects for the Defense Logistics Agency Weapons Support ASC Supplier OE and AF Division. The primary objective is to execute testing per CLIN 0002 to ensure the first produced unit adheres to all technical specifications and performance requirements. Work is performed at Hill AFB and requires the use of non-destructive testing tools and precision measurement equipment. To qualify for this engagement, the provider must maintain AS9100 quality assurance certification. The final deliverables for the project include a comprehensive FAT Report and a formal certification of compliance. This effort falls under NAICS code 336412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Aircraft Frame Fabrication (NSN 1560013733402)This subcontract involves the fabrication and delivery of two aircraft frames under NSN 1560013733402 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The contractor is responsible for manufacturing the frames to exact OEM specifications using aerospace-grade materials and specialized tooling to achieve the required geometry. Compliance requirements include physical identification and bare item marking according to RQ017 and packaging standards per RP001. The work is categorized under NAICS code 336412, with the place of performance located at Hill AFB. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Supply of Housing Assembly (NSN 2840001690069)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

BELLOWS, PRESSURE

Solicitation # SPE7L3-27-T-1580

Solicitation SPE7L3-27-T-1580 is a small business set-aside procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 21 units of pressure bellows, identified by NSN 3010012005475 and Woodward Inc. part number 5216-146. This critical application item is classified as a commercial product under NAICS code 336412. The contract specifies a delivery timeline of 666 days after order, with a need ship date of September 6, 2028, and an original required delivery date of May 24, 2029. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical requirements take precedence. Palletization must comply with RP001. Key regulatory requirements include a prohibition on Class I ozone-depleting chemicals and mandatory compliance with CMMC Level 2 self-assessment and NIST SP 800-171 standards for cybersecurity. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, via the DIBBS portal.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

HOUSING ASSEMBLY

Solicitation # SPE4A5-27-T-2088

Solicitation SPE4A5-27-T-2088 is a request for quotation issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of one Housing Assembly, identified by NSN 2840001690069 and part number 3020137. This is a Foreign Military Sales requirement for Turkey, with a required delivery date of October 27, 2026, and a delivery lead time of 20 days after order. The item is designated as a critical application item, and the contract specifies FOB Origin terms. Shipping is coordinated through A.J. Worldwide Services in Secaucus, New Jersey, for final delivery to the 5th Main Maintenance Factory Directorate in Guvercinlik, Turkey. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement is governed by a variety of FAR and DFARS clauses, including those related to cybersecurity, safeguarding covered defense information, and the prohibition of hexavalent chromium.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

FLYWEIGHT ASSEMBLY

Solicitation # SPE4A7-27-T-2382

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

VALVE, FUEL PUMP

Solicitation # SPE4A7-27-T-2354

Solicitation SPE4A7-27-T-2354 is a request for quotations from the Defense Logistics Agency for 20 fuel pump valves, identified by NSN 2915-00-886-6788. The items are designated as Air Force Critical Safety Items and must be delivered FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The required delivery timeframe is 164 days after award, with a need ship date of April 20, 2027, and an original required delivery date of February 4, 2028. Inspection and acceptance will occur at the origin, and manufacturers are required to maintain a quality management system compliant with SAE AS9100 or an equivalent standard. Offerors must submit quotes via DIBBS and are encouraged to provide quantity ranges to accommodate volatile demands. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any use of non-domestic materials must be disclosed. The solicitation prohibits the use of additive manufacturing unless specifically authorized. Key administrative requirements include registration in the System for Award Management and the upcoming requirement to register via the Account Management and Provisioning System for access to the Vendor Shipment Module. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

PISTON AND INSERT

Solicitation # SPE4A7-27-T-2358

Solicitation SPE4A7-27-T-2358, issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div, is a request for quotations for 14 units of Piston and Insert (NSN 2915008374057). This item is designated as an Air Force Critical Safety Item (CSI), requiring strict adherence to quality standards, including a quality management system compliant with SAE AS9100 or an equivalent. The delivery is set for 229 days after award (ADO), with a need ship date of October 22, 2026. Terms are FOB Origin, with both inspection and acceptance occurring at the origin. Offerors must submit quotes via DIBBS and are encouraged to provide quantity ranges to accommodate potential requirement changes. Compliance with the Buy American Act, the Berry Amendment, and domestic material restrictions is mandatory. The contract requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and contractors must register via the Account Management and Provisioning System (AMPS) to access the Vendor Shipment Module (VSM). Technical requirements include adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the solicitation mandates compliance with CMMC Level 2 cybersecurity standards and prohibits the use of covered defense telecommunications equipment or services.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

TURBO SUPERCHARGER, ENG

Solicitation # SPE4A7-27-T-2350

Solicitation SPE4A7-27-T-2350 is a federal procurement issued by the Defense Logistics Agency (DLA) for three non-aircraft engine turbo superchargers, identified by NSN 2950-01-595-9537 and Cummins Inc part number 4955495. The contract requires delivery within 220 days, with a need ship date of June 15, 2027. Shipping is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is a simplified acquisition that may be eligible for automated award and includes a price evaluation preference for HUBZone concerns. Quality assurance is stringent, requiring manufacturers to comply with SAE AS9003 or ISO 9001 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-2.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

ROD ASSEMBLY, ADJUST

Solicitation # SPE8ED-27-T-0186

Solicitation SPE8ED-27-T-0186 is a request for quotations issued by DLA Troop Support, Construction and Equipment Containers for the procurement of 71 units of an adjustable rod assembly, identified by NSN 5410-01-445-9008 and part number 4375-00197. The contract requires delivery within 27 days, with a need ship date of December 7, 2026, and a final required delivery date of February 6, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, safeguarding covered defense information, and restrictions on the use of mercury and additive manufacturing processes. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia, Pennsylvania, or via the DIBBS portal.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Manufacture of Part Number 4088313

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Manufacture of Part Number 4083716-01

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Manufacture of Part Number 4085092

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Manufacture of Part Number 4079076

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Manufacture of Part Number 4089078-03

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

New Manufacture Material NSN 2840-01-527-6505PR (AMC 3V)

Solicitation # SPRTA1-27-R-0013

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months

Gearbox, Assembly, AI

Solicitation # SPRTA1-27-R-0042

Request for Proposal SPRTA1-27-R-0042 is for the procurement of 30 AI Gearbox Assemblies, specifically wing flap drive gearboxes for the C-130 aircraft. These units, identified by NSN 1680-00-789-9345 and Part Number C7088-1A, are composed of aluminum, steel, and rubber. The contract is expected to be issued on October 28, 2026, with a closing date of November 27, 2026. Delivery is scheduled in increments of six units per month from September 2029 through January 2030, with the final destination being Tinker AFB, Oklahoma. The acquisition is not a set-aside and requires the contractor to be an approved source, with CEF Industries, LLC listed as a qualified source. Unique Identification requirements apply, and the government does not own the manufacturing data, requiring interested firms to coordinate with the original equipment manufacturer. While price is a significant factor, the final award decision may also consider past performance. This procurement is being conducted under the authority of FAR 6.302, as the supplies are available from a limited number of responsible sources.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Multiple NSNs for OEM Pratt & Whitney, addition to Pacer Talon Long Term Contract_End_Item_F100_NSN_Multiple NSNs_PN_Multiple PNs

Solicitation # SPE4AX27R0005

The Department of the Air Force, specifically the 421st SCMS at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis (Notice ID SPE4AX27R0005) to identify potential sources for the procurement of new spares for the F100 platform. This effort is an addition to the Pacer Talon Long Term Contract and focuses on the manufacture of multiple National Stock Numbers (NSNs) for OEM Pratt & Whitney. The specific requirements include 373 units of PN 4089078-03, 7 units of PN 4079076, 7,054 sets of PN 4085092, 1,123 units of PN 4083716-01, and 15 units of PN 4088313. Potential sources must be capable of providing all labor, materials, and equipment for the manufacture, inspection, testing, packaging, and shipping of these items. This is not a formal solicitation, and no funds are currently available for the information requested. The government is using this process to determine the best acquisition strategy and to evaluate if the requirement should be a competitive bid or a Small Business Set-Aside. Interested vendors, including large and various small business categories under NAICS code 336412, must submit their business information and a Source Approval Request (SAR) package via DoD SAFE by November 28, 2026. Qualification requires adherence to Manufacturing Qualification Requirements (MQR) and Engineering Data Lists (EDL), and vendors may be responsible for nonrecurring engineering costs to become an approved source. Performance will take place at Tinker AFB, Oklahoma.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Cylinder Assembly, A

Solicitation # SPRTA127R0016

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

COMPRESSOR ROTOR_End_Item_J85_NSN_2840016309064OK_PN_5126T28G08

Solicitation # FD20302700441

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

CEMS Event Reporting and Data ManagementThe CEMS Event Reporting and Data Management subcontract involves providing specialized data entry and reporting services for Department of the Air Force F110 engine projects. The selected contractor will be responsible for reporting component status into the Comprehensive Engine Management System in strict accordance with USAF Technical Order 00-25-254-1 to support prime contractors. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this effort requires personnel to obtain a favorable National Agency Check with Inquiries to ensure authorized access to DoD systems. The primary deliverable for this engagement is the accurate completion of CEMS Event Reporting entries.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Aviation Component Inspection and Test ServicesThe Aviation Component Inspection and Test Services subcontract involves performing critical inspections and testing for prime contractors supporting Department of the Air Force F110 engine projects. The primary objective is to certify that temperature sensors adhere to Critical Safety Item standards through rigorous testing conducted according to engineering drawings. The selected provider must utilize precision calibration equipment to generate detailed written documentation and material certifications. To qualify for this engagement, contractors must hold either AS9100 or ISO 9001-2015 certification. The scope of work culminates in the delivery of certified inspection and test reports to the Department of Defense via the Ok DLA Aviation office in Oklahoma City. Responses for this opportunity are due by December 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

HEATER, AIRCRAFT ENGINE

Solicitation # SPRRA1-20-R-0069

Al DLA Aviation At Huntsville

POSTED

about 6 years ago

CLOSED

about 6 years ago

Overhaul of F100 220/220E and F100 229 Fuel Nozzles

Solicitation # FA812120R0024

FA8121 Afsc Pzaaa

POSTED

about 6 years ago

CLOSED

about 6 years ago

CH53k T408 Cost Reduction Initiatives

Solicitation # N00019-16-G-0005_CH53K_T408_CRI

Naval Air Systems Command

POSTED

about 6 years ago

CLOSED

about 6 years ago

MQ-8C Engines & Components Procurement FY20

Solicitation # N00019-20-RFPREQ-PMA-266-0070

Naval Air Systems Command

POSTED

about 6 years ago

CLOSED

about 6 years ago

SHROUD SEGMENT,TURB

Solicitation # SPRTA120R0201

Ok DLA Aviation At Oklahoma City

POSTED

about 6 years ago

CLOSED

about 6 years ago

Requirement for Aircraft Exhaust Duct

Solicitation # SPRTA120F1755

Ok DLA Aviation At Oklahoma City

POSTED

about 6 years ago

CLOSED

about 6 years ago

Spacer, Compressor R.

Solicitation # SPRTA120R0019

Ok DLA Aviation At Oklahoma City

POSTED

about 6 years ago

CLOSED

about 6 years ago

Starter, Engine, Air

Solicitation # SPRTA1-20-Q-0408

Ok DLA Aviation At Oklahoma City

POSTED

about 6 years ago

CLOSED

about 6 years ago

29--FILTER ELEMENT,FLUI

Solicitation # SPE4A720R0303

POSTED

about 6 years ago

CLOSED

about 6 years ago

29--FILTER ELEMENT,FLUI

Solicitation # SPE4A720R0306

POSTED

about 6 years ago

CLOSED

about 6 years ago

PUMP TEST STAND MODERNIZATION MODEL PTS-1

Solicitation # FA8125-20-R-0027-0001

FA8125 Afsc Pzima

POSTED

about 6 years ago

CLOSED

about 6 years ago

29--DETECTOR,METALLIC P

Solicitation # SPE4A720R0656

POSTED

about 6 years ago

CLOSED

about 6 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS