Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHIELDING GASKET, EL

Active
SPE7M0-26-T-021NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a single shielding gasket, electronic part number 2050-62401-64 with NSN 5999016879053, under solicitation SPE7M0-26-T-021N. The item must be delivered within five days of contract award to the specified military receiving location at Tobyhanna Army Depot, Pennsylvania, with delivery terms FOB origin and zero variance allowed in quantity. Acceptance and inspection occur upon arrival at the destination, and packaging must fully comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container requirements, while marking adheres strictly to MIL-STD-129 with no special marking codes applied. The contract incorporates technical and quality requirements referenced from the DLA Master List, and packaging must follow DLA-specific procurement standards. The shipment must be sent using the fastest traceable means, excluding parcel post, and must be palletized according to DLA requirements. The freight shipping and marking-for addresses are identical, both directed to the ASARS 1C Bay 6 receiving bay at Tobyhanna Army Depot. The supplier is identified as MAJR PRODUCTS CORP with DODAAC 0PL74, and the point of contact for the procurement is Gerard Quinn at the Department of Defense’s Maritime Supply Chain ESOC. The required delivery date is July 27, 2026, with a solicitation response deadline of August 10, 2026, and the NAICS code 334419 classifies this under other electronic component manufacturing. Government-use identifiers and codes are embedded for logistics tracking, and the unit of issue is each, with a total price of one dollar per unit.

General Info

One shielding gasket, NSN 5999016879053, due July 27, 2026, FOB origin, DLA packaging and marking standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

ASARS 1C BAY 6, TOBYHANNA, PA, 18466-5050, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-021N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Gerard Quinn
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHIELDING GASKET,EL
SHIELDING GASKET,ELECTRONIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MAJR PRODUCTS CORP 0PL74 P/N 2050-62401-64
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017636686 0001 EA 1.000
NSN/MATERIAL:5999016879053
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE7M0-26-T-021N
SECTION B
PR: 7017636686 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90CGG
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASRS RECEIVING BLDG 1 BAY 6
TOBYHANNA PA 18466-0000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W25G1V
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASARS 1C BAY 6
TOBYHANNA PA 18466-5050
US
MARKFOR
W25G1V
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASARS 1C BAY 6
TOBYHANNA PA 18466-5050
US
M/F: (TCN) W25G1V6203008C
RDD:
PROJ: 3AD TP 1
SUPP ADD: W25G1V SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VK
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M0-26-T-021N NSN/Part Number: 5999-01-687-9053 Quantity: 1 EA Purchase Request: 7017636686QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
PAN, DRAINThis contract pertains to the procurement of five units of a PAN, DRAIN item with NSN 4910-01-626-4341 under solicitation SPE7L3-26-T-136B, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. Delivery is required within 147 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied, and must be palletized according to DLA packaging guidelines. The contract explicitly prohibits the use of ozone-depleting chemicals and restricts mercury or mercury-containing compounds unless specifically exempted for approved functional applications such as certain batteries, lighting, or weapon systems, with additional containment requirements for portable devices. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Unit of issue is each (EA), with zero variance allowed in quantity, and shipment must follow DLAD procedural notes C19 and C20. The required ship date is January 5, 2027, with an original delivery deadline of January 18, 2027. All supplies must conform to DoD authorized unit of issue standards, and substitute materials must be pre-approved unless explicitly authorized by the specifications.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO FThis contract specifies the procurement of three radio frequency cable assemblies identified by NSN 5995015086552 and part number 4600355, supplied by Northrop Grumman Systems Corporation. The items must be delivered within 20 days to Fort Riley, Kansas, under FOB origin terms with zero variance in quantity, and are subject to destination inspection and acceptance. Packaging and preservation must strictly comply with MIL-STD-2073-1E and MIL-STD-129, prohibiting any use of mercury or mercury-containing compounds in preservation, packaging, or marking, except for limited functional applications already defined. All packaging and unit identification must align with DLA packaging requirements and authorized unit of issue standards, with no item unique identification required per customer request. The cable assemblies are to be ship via traceable means only, excluding parcel post, and marked according to specified codes without special identifiers. The contract is issued under solicitation SPE4A6-26-T-09ZP by the Department of Defense’s ASC Commodities Division, with technical and quality requirements incorporated by reference from the DLA Master List. The delivery is for a military logistics unit at Fort Riley, and the requirement is linked to project TP 3 with a required delivery date of July 22, 2026. The contractor must adhere to all applicable defense regulations, including restrictions on hazardous materials and standardized marking, and all documentation must follow government-specific controls outlined in the contract data. The point of contact for inquiries is Katherine Zacharias, and the solicitation was posted with a response deadline in August 2026, reflecting its status as a federal procurement under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
ATTENUATOR, FIXEDThe contract pertains to the procurement of three fixed attenuators with NSN/Part Number 5985-01-211-5964 under solicitation SPE7M0-26-Q-1113, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within 30 days of award, and the response deadline for submissions is August 11, 2026. The item is classified as technical data subject to U.S. export controls under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and access is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on export-controlled technical data, and have been formally approved by the DLA controlling authority. The place of performance is Chambersburg, Pennsylvania, with Audrey Acuna listed as the primary point of contact for inquiries.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
FILTER ASSEMBLY, ELEThe contract pertains to the procurement of one unit of a FILTER ASSEMBLY, ELE with NSN 5915-01-568-6701 and part number RME-F-0666-P2, under solicitation SPE7M0-26-T-020X. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the item is non-hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951 but still adhering to DLA’s higher-priority specifications; if hazardous, it must meet TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, and palletization must comply with RP001. The unit of issue is each, with one unit ordered at a total price of $1.00. Shipping is to be conducted via traceable freight to the Naval Air Station North Island in San Diego, California, using the provided freight address and contact; parcel post is explicitly prohibited. The required delivery date is July 27, 2026, and the point of contact is Audrey Acuna. The item falls under NAICS code 334419 and is managed by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANThe contract specifies the procurement of one wiring harness, part number 6150015913173, under solicitation SPE7L1-26-T-883R, with a required delivery within ten days of contract award. Delivery is FOB origin, and no quantity variance is permitted. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards including ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, adhere to RP001 DLA packaging requirements, and be palletized accordingly. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Cybersecurity obligations include a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. Shipment must be sent via traceable freight methods to the designated military delivery point at Camp Lejeune, North Carolina, with parcel post strictly forbidden. The contract emphasizes compliance with all DLA and Department of Defense directives, with oversight and primary point of contact managed by Kristina Derry of the Land Supply Chain under the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIThe contract is for the procurement of a CABLE ASSEMBLY, RADI with part number 438694-1 and NSN 5995011975628, issued under solicitation SPE4A6-26-T-10AN by the Department of Defense’s ASC Commodities Division. Eight units are required at a unit price of $8.00, with total contract value of $64.00, to be delivered FOB origin within 140 days of contract award, with a firm delivery date of December 24, 2026. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E and marking required per MIL-STD-129, including no special marking codes. Palletization and packaging follow DLA’s specific procurement requirements, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict technical and quality compliance through referenced standards including MIL-STD-1916 or ASQ H1331 for sampling, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, with unspecified attributes treated as major and zero non-conformances required. The manufacturer may choose attribute or variable inspection methods unless restricted. Cybersecurity compliance at CMMC Level 2 is mandatory, with the supplier required to complete a self-assessment. Covered Defense Information applies, and all technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements. The CAGE code for the supplier is 00752, and the item is designated as a Critical Application Item. Government identification must be removed from non-accepted supplies per RQ011, and configuration changes require formal engineering change proposal management. All documentation and compliance are governed by the DLA Master List revision in effect at the RFP issue date.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, ELThe contract specifies the procurement of a shielding gasket, part number 30-01-1958-1298, with NSN 5999016880087, in a quantity of two units, manufactured by Parker-Hannifin Corporation. The item is designated as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Compliance with MIL-STD-1916 or ASQ H1331 is mandated for sampling, with zero non-conformances required unless otherwise stated, and attributes must be verified at specified levels with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor traits respectively. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and cushioning, while marking follows MIL-STD-129 with no special marking required. Palletization meets DLA packaging standards, and the item must be shipped via the fastest traceable means, excluding parcel post. Delivery is required within five days of contract award, FOB origin, with a strict quantity variance of plus or minus 0 percent. Inspection and acceptance both occur at the destination, specifically at the ASARS 1C Bay 6 facility in Tobyhanna, Pennsylvania. The required delivery date is July 27, 2026, and the item must be shipped to the designated government receiving location. The contract includes configuration change management requirements, documentation for source approval requests, and specific controls for removal of government identification from non-accepted supplies. All documentation, quality assurance, and delivery procedures are governed by DLA directives, with the responsible point of contact being Gerard Quinn at the Department of Defense, Maritime Supply Chain ESoC Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to a specialized electrical cable assembly identified by NSN 6150-01-543-3176, with a quantity of ten units required for delivery within twenty days after order. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size, and any amendments superseding prior revisions. Packaging must comply with DLA procurement standards, and the item is subject to defense information controls under RD002, including strict protocols for removing government identification from non-accepted supplies. Technical data associated with the cable assembly is controlled under ITAR or EAR regulations, restricting its export, disclosure, or transfer to foreign persons regardless of location, with DFARS 252.225-7048 governing compliance. Access to this controlled data is limited to contractors holding approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire and received official approval. The solicitation, issued under number SPE4A6-26-T-09ZF on July 28, 2026, with a response deadline of August 5, 2026, is managed by the ASC Commodities Division of the Department of Defense, with Thanh Hue Nguyen as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARYThe contract specifies the procurement of a rotary switch, part number 50A90-01-1-02N from Grayhill Inc, identified by NSN 5930-01-062-9808, with a quantity of twelve units. Delivery is required within five days of order placement, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of any Class I ozone-depleting substance in manufacturing or processing is strictly prohibited unless written approval from the contracting officer is obtained, though this restriction does not apply to commercial items or part-numbered-only items. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Packaging must conform to MIL-STD-129 labeling and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous per Fed-Std-313, with all packaging subject to DLA packaging requirements and palletization standards. Shipping must be by the fastest traceable means, excluding parcel post, to Soto Cano Air Base in Honduras, with the shipment marked for W8080X and designated as RDD 999/NMCS. The required delivery date is July 29, 2026, and the contract is issued under solicitation SPE7M0-26-T-020F with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
DRILLING AID IFR FAThe contract specifies the procurement of one unit of a drilling aid identified by NSN 4920-01-572-2589 and part number 74D110729-1001 under solicitation SPE4A5-26-T-310Y, with a required delivery within 20 days of award, FOB origin, and inspection and acceptance occurring at the destination. The item must be packaged in accordance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. The contract enforces strict compliance with sampling standards such as MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the supplier must meet ISO 9001:2015 quality requirements regardless of manufacturing status. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request. The delivery address is the Naval Air Station in New Orleans, with shipping required via traceable freight methods only; parcel post is prohibited. The contract references specific DLA quality and technical requirements identified by R and I numbers, all of which are controlled by the master list version in effect on the solicitation issue date. The point of contact is Marcus Williams, and the required delivery date is July 20, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThe contract specifies the procurement of 12 units of a specialized cable assembly identified by NSN 6150-01-258-3702 under solicitation SPE4A6-26-T-09ZT, with a delivery deadline of 94 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with verification standards governed by MIL-STD-1916 or comparable zero-based sampling plans, requiring zero non-conformances in sampled lots unless otherwise stated. Attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The assembly is covered by Defense Information and must comply with DLA packaging standards and configuration change management protocols, including engineering change proposals and variance requests. Physical identification of the item must adhere to specified marking requirements, and any government identification on non-accepted supplies must be removed. The technical data associated with this cable assembly is subject to U.S. export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and applies to both foreign and domestic entities. DFARS 252.225-7048 governs compliance, and access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export-controlled data training and the DLA questionnaire, and have received formal approval from DLA. Cybersecurity compliance requires CMMC Level 2 certification by a third-party assessment organization. The solicitation was issued by the Department of Defense’s ASC Commodities Division with performance located in New Cumberland, Pennsylvania, and the point of contact is Angela Boyce. The NAICS code 334419 indicates classification under Other Electrical Equipment and Component Manufacturing, and the deadline for responses was August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe item is a PUSH SWITCH with NSN/Part Number 5930-01-455-0873, quantity of 114 units, under Purchase Request 7016088286, with a delivery requirement of 42 days ADO. The solicitation, numbered SPE7M8-26-T-5628, is a Total Small Business Set-Aside under FAR 19.5 with a NAICS code of 334419, posted on July 28, 2026, and responses due by August 10, 2026. Performance is designated to Tracy, California, 95304-5000, and the contracting office is the Electrical Devices Division of the Department of Defense, with Stephen Stanko as the primary point of contact. Technical data associated with this item is subject to export controls under either ITAR or EAR, and any disclosure to foreign persons, regardless of location, is prohibited without prior authorization from the Department of State or the Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled technical data, and have successfully passed the DLA Export-Controlled Technical Data Questionnaire. DFARS 252.225-7048 governs compliance, and all contractors, including U.S. companies and their foreign subsidiaries, must adhere to these restrictions.
ELECTRICAL DEVICES DIV

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract is for the procurement of one hose assembly, nonmetallic, identified by NSN 4720-01-571-2920 and part number AT361660 from Deere & Company, under solicitation SPE7M0-26-T-021X. The item must be delivered within five days of order placement at origin FOB terms, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Delivery is to be made via the fastest traceable shipping method, explicitly excluding parcel post, with shipping instructions directed to the Distribution Management Office at MCLB Albany, Georgia, and the point of contact for inquiries is Abaigael Masterson. The original required delivery date is July 29, 2026, and the contract includes government-specific identifiers for tracking and logistics coordination, with the unit of issue being each and the total price set at one dollar.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
DIBBS
ROPE, TOW LINEThis contract specifies the procurement of one unit of a rope tow line with NSN 2090-01-632-2165, required for delivery within five days under solicitation SPE7M0-26-T-021Y. The item must be delivered FOB origin with no variance allowed in quantity and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence, and labeling must follow MIL-STD-129. Palletization is required per DLA packaging standards, and the unit of issue is each. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing items requiring shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is strictly prohibited unless written approval from the contracting officer is obtained, excluding commercial items as defined in FAR 11.001. Shipping must be via the fastest traceable means, with parcel post strictly forbidden. The delivery destination is the MDMC Production Plant in Albany, Georgia, and the required delivery date is July 28, 2026. All technical and quality specifications referenced in the DLA Master List are binding and supersede any conflicting standards unless explicitly supplemented by amendment.
Ship Building and Repairing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
OUTLET, PIPEThe contract pertains to the procurement of two units of an outlet pipe, identified by NSN 4730013890398 and part number AD40098-54, supplied by Hamilton Sundstrand Corporation and Hamilton Sundstrand Space Systems. The item is classified as a critical application component, requiring manufacturing via a forging process, with tooling necessary for production. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede industry standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and DLA Packaging Requirements RP001, with palletization and unit packaging strictly defined. The delivery is FOB destination within five days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is to be delivered to a U.S. naval facility in Yokosuka, Japan, with both parcel post and freight shipping details provided. The contract falls under solicitation SPE7M0-26-T-021Z, with a required delivery date of July 28, 2026, and is issued under the DoD unit of issue system. Each unit is priced at $2.00, totaling $4.00 for the order.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
GUARD, HOSE-TUBINGThe contract specifies the procurement of one unit of a hose-tubing guard with NSN 4720-01-566-4759 and part number 87368775 under solicitation SPE7M0-26-T-021J, issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance; inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 as supplemented by stricter requirements from the DLA Master List of Technical and Quality Requirements, including mandatory marking and labeling per MIL-STD-129 and palletization according to RP001. The item must be shipped via traceable means excluding parcel post to the designated military receiving point in Pineville, Louisiana, with the shipment identified by RDD N and NMCS protocol. The required delivery date is July 27, 2026, with the contract open for response until August 10, 2026. Government-specific identifiers and shipping controls are tightly enforced, and all documentation must align with the DLA unit of issue standards.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
ANTENNAThe contract pertains to the procurement of one antenna with NSN 5985-12-418-4346 under solicitation SPE7M0-26-Q-1112, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The item is priced on a firm fixed price basis with zero variance allowed in quantity, requiring exact compliance with the specified one-unit order. Delivery must occur within 30 days after award, with destination as both the inspection and acceptance point, and FOB origin terms apply. Packaging must strictly follow MIL-STD-2073-1E with approved materials and methods, including unit packaging E5, inner packaging E5, and compliance with MIL-STD-129 marking standards without special markings. Palletization adheres to DLA packaging requirements. Shipment must be sent via traceable means excluding parcel post to the designated delivery location at Fort Hood, Texas, addressed to W45RNQ. The antenna is designated for government use with a material need date of July 27, 2026, and includes a purchase request number 7017636729. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. All supply and service details are governed by the DLA’s authorized unit of issue, and unit conversions must be verified via the provided X12 reference link. The point of contact for the solicitation is Audrey Acuna, with response deadlines and posting dates set for August 11, 2026 and July 28, 2026 respectively. Government-use codes and routing indicators are included for internal tracking and logistics processing, and the contract explicitly prohibits the use of government identification on non-accepted supplies.

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
DIBBS
TEST SET SUBASSEMBLThe contract pertains to the procurement of a single TEST SET SUBASSEMBLY with NSN 4921-01-562-2104, requiring delivery within five days of award. It is governed by stringent cybersecurity compliance standards, mandating that the vendor be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item includes technical data subject to U.S. export controls under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors approved by DLA, who must hold a valid US/Canada Joint Certification Program certification, complete mandatory training on handling export-controlled technical data, and pass the DLA Export-Controlled Technical Data Questionnaire. The solicitation number is SPE7M0-26-T-020C, posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 334515. The contracting activity falls under the Department of Defense’s Maritime Supply Chain ESOc Buys, with Audrey Acuna designated as the primary point of contact.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METALThis contract pertains to the procurement of a single metal tube assembly identified by NSN 4710-01-680-7501 and part number 938456, supplied by DRS Sustainment Systems, Inc., under solicitation SPE7M0-26-T-020R. The item must be delivered within five days of order placement to the specified logistics warehouse at Fort Hood, Texas, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, MIL-STD-129, and DLA’s master packaging requirements, with palletization following RP001 guidelines. Technical and quality specifications referenced by R or I numbers from the DLA Master List take precedence over all other standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The unit of issue is each, with a total contract value of one unit at a unit price of $1.00. Shipment must occur via the fastest traceable means, excluding parcel post, and must bear the designated marking reference W507HD62055600, project code GB4 TP 1, and RDD 266. The original required delivery date is July 29, 2026, and the contract contains specific government-use-only identifiers for logistics and tracking purposes.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333923
New
DIBBS
VALVE, AIRThe contract is for one air valve with NSN 2030-00-652-3299 and part number P51121-1, supplied by WESTINGHOUSE AIR BRAKE TECHNOLOGIES, classified as a critical application item under solicitation SPE7M0-26-T-021P. Delivery is required within five days FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and be labeled according to MIL-STD-129, but all DLA Master List of Technical and Quality Requirements supersede ASTM standards. Palletization must follow RP001 DLA Packaging Requirements, and shipment must use the fastest traceable means excluding parcel post. The sole delivery address is Fort Eustis, Virginia, with the same mark-for and freight shipping details, and the required delivery date is July 27, 2026. The unit of issue is each, priced at one dollar per unit, with a total price of one dollar. The contract mandates strict adherence to government-specified identification and packaging protocols and includes a government-only identifier for tracking and logistics processing.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CERAMIThe contract specifies the procurement of a fixed ceramic dielectric capacitor with part number 100-100-NPO-120J and NSN 5910-01-369-6366, identified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container codes, while palletization follows DLA packaging requirements. All units must be marked per MIL-STD-129 with the special code ZZ and must include lead content identification markings as defined by IPC/JEDEC J-STD-609, with the contractor responsible for applying these labels in strict accordance with the standard’s guidelines. Preservation and packaging must also conform to MIL-DTL-39028 for capacitors. The shipment is to be delivered to a U.S. Army National Guard facility in Manchester, New Jersey, with strict instructions to use only traceable freight methods and prohibit parcel post. The required delivery date is July 29, 2026, and the contract number is SPE7M0-26-T-020T. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable version is determined by the solicitation or award date. The contract includes multiple identical CLIN entries reflecting the same item and delivery terms, with each requiring compliance with hazardous materials shipping protocols and detailed unit-level marking specifications. Contact for the procurement is Audrey Acuna at the Department of Defense, and the item is subject to all standard DoD acquisition policies.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract pertains to the procurement of three alternating current motors with NSN 6105-01-260-9145 and part number 817025-001 from Armstrong Pumps Inc, under solicitation SPE7M0-26-T-020Y. Delivery is required within five days of award, with delivery terms specified as FOB origin and inspection and acceptance points at the destination. The unit of issue is each, with no variance allowed in quantity. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951; packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Mercury or mercury-containing compounds are strictly prohibited unless functionally integral to batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, in which case portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Shipping must occur via the fastest traceable means, excluding parcel post, to the designated government receiving location at Fort Eustis, Virginia. The required delivery date is July 27, 2026, and the contract is subject to government-only use codes and internal tracking identifiers.
Motor and Generator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAThe contract specifies the procurement of a backsheat, electrical, identified by part number 712S380NF2020-3C and NSN 5935016637060, with a quantity of one unit to be delivered within five days FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, cushioning, and container types, with the pack code designated as U. Marking must follow MIL-STD-129, with no special marking required. The item is destined for USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, but parcel post is prohibited; shipments must use the fastest traceable means as specified in DLAD Proc Note C19 and C20. The delivery is non-negotiable with zero variance allowed in quantity, and inspection and acceptance occur at destination. The contract is issued under solicitation SPE7M0-26-T-022B with a required delivery date of July 30, 2026, and the supplier must adhere to all government-specific logistics codes, project identifiers, and shipping instructions, including using the Vendor Shipment Module and noting the transportation control number.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
STRIP, ELECTRICAL GROUNThe contract pertains to the procurement of a single unit of a strip for electrical grounding, identified by NSN 5999-01-588-3447, under purchase request 7017460406. Delivery is required within five days of award, with the solicitation number SPE7M0-26-T-022G issued on July 28, 2026, and responses due by August 10, 2026. The item falls under NAICS code 335999 and is part of a federal acquisition managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance designated to Farmingdale, NY, 11735. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date. The alternate offeror must submit a complete data package, including specifications for both the approved and alternate parts. Packaging must comply with DLA requirements, and all non-accepted supplies must have government identification removed. Physical identification or bare item marking is required, and no data is currently provided, placing the responsibility on the offeror to supply full documentation. Primary point of contact is Gerard Quinn, reachable via email and phone provided.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details