Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

SHIELDING GASKET, ELECT

Active
SPE7M5-26-T-333WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a shielding gasket for electronic applications, identified by NSN 5999-01-680-5990 and part number PG632000-06, with a quantity of seven units required. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards, while marking complies with MIL-STD-129 with no special marking codes. The item is to be delivered FOB origin within 116 days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures follow DLAD Proc Notes C19 and C20. The original required delivery date was October 14, 2026, with a needed ship date of November 21, 2026, under solicitation SPE7M5-26-T-333W, issued by the Department of Defense's Active Devices Division.

General Info

Seven shielding gaskets NSN 5999-01-680-5990 delivered FOB origin by November 21, 2026, to New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-333W for DLA Land and Maritime Active Devices

PDFrfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
SHIELDING GASKET,ELECTRONIC
SHIELDING GASKET<(>,<)> ELECTRONIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
AVIATION DEVICES AND ELECTRONIC 1NPE1 P/N PG632000-06
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527819 0001 EA 7.000
NSN/MATERIAL:5999016805990
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
SPE7M5-26-T-333W
SECTION B
PR: 7017527819 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/21/2026 Original Required Delivery Date:10/14/2026
SPE7M5-26-T-333W NSN/Part Number: 5999-01-680-5990 Quantity: 7 EA Purchase Request: 7017527819QTY: 7 Delivery: 116 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
SHOP EQUIPMENT, AUTOThis contract pertains to the procurement of a single unit of shop equipment for automotive use, identified by NSN 4910-15-021-4426 and part number 506010039, supplied by IVECO OTO MELARA SCRL and IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all items must be marked and labeled in accordance with MIL-STD-130N for military property identification. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless otherwise authorized in specifications. The equipment is to be delivered FOB origin within 181 days from the contract date, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 25, 2027. Transportation logistics are governed by specific DLA procedural notes, and the unit of issue is one each. The contract was issued under solicitation SPE7L3-26-T-122J, with a response deadline of July 27, 2026, and is administered by the Department of Defense’s Land Supplier Operations Vehicle Support office. All associated data, including unit of issue conversions, must align with official DLA guidelines provided through their designated resources.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
PANEL, RADIO FREQUENThe contract pertains to the procurement of 28 radio frequency panels under NSN 5999-01-311-7311, issued as a small business set-aside with solicitation number SPE7M5-26-T-301T and a response deadline of July 21, 2026. The item is subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, with packaging, marking, and palletization mandated to comply with RP001, MIL-STD-129, and TQ IP025, superseding ASTM D3951 where applicable. The panels are classified as defense-related technical data subject to export controls under ITAR or EAR, requiring compliance with DFARS 252.225-7048; access to such data is restricted to contractors with approved JCP certification, completed DLA export training, and authorized status. The contract enforces cybersecurity compliance via CMMC Level 2 certification and mandates safeguarding of covered defense information under 252.204-7012, with NIST SP 800-171 assessment requirements also applicable. Hazardous materials must adhere to 29 CFR 1910.1200 labeling standards and 252.223-7001 requirements, while prohibitions on hexavalent chromium and toxic material disposal are enforced. Delivery is required to the DLA New Cumberland facility in Pennsylvania within 137 days after award, under FOB Origin terms, with inspection and acceptance occurring at destination under FAR 52.246-2. The sole invoicing system is WAWF, and the contracting office point of contact is Margaret Smith. Offerors must hold a unique entity identifier and CAGE code, and affirm small business status per the NAICS code 334419 as part of a total small business set-aside, with representations regarding employment eligibility, trafficking in persons, equal opportunity, and sustainable products mandated. No specific contract type is specified at solicitation stage, but it will be determined upon award, with contractual clauses including those on whistleblower rights, compensation restrictions for former DoD officials, limitation on arbitration, and prohibition of covered telecommunications equipment. The contract value is not available due to incomplete pricing data in the solicitation, though multiple CLINs are referenced without full extended pricing.
ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANThe contract specifies the procurement of a wiring harness, part number 456147-3, with NSN 6150016044430, for a quantity of three units, to be delivered FOB origin within 171 days, with no variance allowed in quantity. The item is designated as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ Z1.4 sampling methods with zero non-conformances required unless otherwise stated, and specific verification levels assigned to critical, major, and minor attributes. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. The item must be palletized as per DLA guidelines, and all preservation, packaging, and marking materials are prohibited from containing mercury or mercury compounds, with exceptions only for functional uses in specified components such as batteries or sensors, which must include secondary containment as per NAVSEA 5100-003D. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes. The contract is issued under solicitation SPE4A6-25-T-36QD by the Department of Defense’s ASC Commodities Division and is classified as a federal acquisition under NAICS code 334419. The response deadline is July 21, 2026, with an original required delivery date of July 17, 2026, though a need ship date is listed as March 2, 2026. Acceptance and inspection occur at the destination, and all documentation must reflect current DLA standards in effect at the time of solicitation or award. The supplier must ensure full compliance with physical identification, documentation, and mercury prohibition requirements, and all supplies must be free of government identification if not accepted. Unit of issue is each (EA), pricing and total value are not specified in the provided data, but delivery and compliance details are binding and strictly enforced.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLEThe contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930012210286 and part number MS27753-36, governed by technical specifications MIL-DTL-83731F Sup 1 and MS27753J, both effective as of specified dates. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. The use of Class I ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items as defined in FAR 11.001 or to part-numbered-only items. Full and open competition applies, and the item must be packaged per RP001 DLA Packaging Requirements, with labeling adhering to MIL-STD-129 and packaging conforming to FED-STD-313—commercial packaging under ASTM D3951 if non-hazardous, or TQ requirement IP025 if hazardous. Palletization must follow RP001 guidelines. The delivery is FOB origin, with inspection and acceptance at destination; quantity variance is strictly zero percent, and delivery is required within 221 days from contract award, with an original required delivery date of October 14, 2026, and a needed ship date of March 6, 2027. The unit of issue is each, with a total quantity of 23 units at $23.00 each. The delivery address is DLA Distribution Cherry Point in North Carolina, and transportation follows DLAD procedural notes C19 and C20. The solicitation number is SPE7M8-26-T-5419, posted on July 16, 2026, with responses due by July 27, 2026, under NAICS code 334419, managed by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the primary point of contact.
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details