Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHIELDING GASKET, ELECT

Active
SPE7M5-26-T-366GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 408 shielding gaskets, electronic, with NSN 5999-00-167-1136, under solicitation SPE7M5-26-T-366G, issued by the Department of Defense’s Active Devices Division. The delivery is required within 155 days after order, and responses must be submitted by August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The item is subject to export control under either ITAR or EAR, meaning any disclosure of technical data to foreign persons, including those located in the U.S., requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire, may access the controlled data. Physical identification and removal of government markings from non-accepted supplies are required, and covered defense information protections are in effect. The place of performance is New Cumberland, Pennsylvania, with Margaret Smith as the primary point of contact.

General Info

Procure 408 shielding gaskets, NSN 5999-00-167-1136, by August 14, 2026, with ITAR/EAR controls and U.S./Canada certification required.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-366G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHIELDING GASKET,ELECTRONIC
SHIELDING GASKET, ELECTRONIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5999-00-167-1136 Quantity: 408 EA Purchase Request: 7017600864QTY: 408 Delivery: 155 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-225J
The contract pertains to the procurement of 13 electrical coils identified by NSN 5950-01-227-4552 under purchase request 7017604107, with a delivery requirement of 168 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract mandates that alternate offerors submit a complete data package including specifications for both the approved and alternate parts, with no government identification to be removed from non-accepted supplies. The solicitation number is SPE7M1-26-T-225J, posted on July 23, 2026, with responses due by August 3, 2026. The North American Industry Classification System code is 334416, and the procuring agency is the Department of Defense through the Maritime Supply Chain office. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the primary point of contact is Ryan Snyder, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-366L
The contract pertains to the procurement of 20 units of a shielding gasket for electronic applications, identified by NSN 5999-01-341-6563, under solicitation SPE7M5-26-T-366L, with a response deadline of August 14, 2026, and a delivery requirement of 166 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific controls under RP001 and RA001, and the material must be 160 inches in continuous length. The item involves export-controlled technical data subject to ITAR or EAR regulations, requiring explicit authorization for any export or disclosure to foreign persons, whether inside or outside the U.S., and DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export-controlled data training, and approval from the DLA controlling authority are permitted to access the technical data. The procurement is a federal solicitation managed by the Department of Defense’s Active Devices Division, with performance located in Jacksonville, Florida, and primary point of contact Margaret Smith, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M5-26-T-351U
The contract pertains to the procurement of a resistor network, identified by part number M8340101M1002GB and NSN 5905010555581, under solicitation SPE7M5-26-T-351U, with a requirement for 423 units delivered within 168 days. The item is classified as a commercial item and must comply with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically MIL-PRF-83401H(4) and MIL-PRF-83401H(5) Supplement 1. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicitly approved in writing by the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the item, except for specific functional applications outlined in NAVSEA 5100-003D. All units must be packaged according to MIL-STD-2073-1E and marked per MIL-STD-129, with additional lead finish labeling required in accordance with IPC/JEDEC J-STD-609. The component must be protected against electrostatic discharge and electromagnetic interference using qualified materials listed on the QPL-81705, specifically MIL-PRF-81705 Type I and Type III barrier materials for ESD and EMI shielding, and all packaging must be applied at an approved field force protective workstation. The item requires cushioning and containment measures to prevent physical damage to leads and terminals. Delivery is FOB origin to Robins Air Force Base, Georgia, with no variance allowed in quantity. The supplier must verify that all ESD/EMI packaging materials originate from qualified manufacturers and provide technical packaging data if the solicitation does not explicitly mandate such protection. The contract enforces full and open competition, and the required delivery date is December 12, 2026, with a need ship date of January 19, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PLASTI
Solicitation # SPE7M5-26-T-345H
The contract calls for the procurement of 20 fixed plastic dielectric capacitors with NSN 5910-01-264-7790 under solicitation SPE7M5-26-T-345H, issued by the Department of Defense’s Active Devices Division as a total small business set-aside under NAICS code 334416. Delivery is required within 364 days of contract award, with FOB Origin terms placing transportation risk on the buyer upon shipment, and all items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-39028 for capacitors, with preservation methods including clinging/drying and unspecified preservation materials, while marking must adhere to MIL-STD-129 and IPC/JEDEC J-STD-609 for identifying lead and lead-free component finishes on each unit pack. The contract prohibits the intentional use of mercury compounds and Class I ozone-depleting substances except for specifically exempted applications such as batteries, fluorescent lamps, and certain instruments, which must include secondary containment per NAVSEA 5100-003D. Hexavalent chromium is also banned, and all hazardous materials must be properly labeled in accordance with DFARS and OSHA standards, including GHS and HMIS formats. Compliance with cybersecurity and information safeguarding requirements is mandatory, including adherence to NIST SP 800-171 for protecting Controlled Unclassified Information (CUI), implementation of the Safeguarding Covered Defense Information and Cyber Incident Reporting clause, and prohibition on using covered telecommunications equipment from specified foreign entities. Contractors must maintain accurate records and report cyber incidents promptly, while also ensuring all employees are informed of whistleblower protections and that no mandatory arbitration clauses are imposed on personnel. Acceptance occurs at the destination, with no variance permitted in quantity (plus or minus zero percent), and all products must be inspected and certified as meeting all technical and quality requirements referenced in the DLA Master List. Invoicing must be submitted electronically via WAWF, using the appropriate document type for fixed-price line items, and payments are subject to accelerated terms for small business subcontractors. The total estimated value is $20.00 for the capacitor line item, though additional line items with higher values are referenced but lack full clarity or formal linkage to the main procurement. All offerors must self
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, ADJUSTABLE
Solicitation # SPE7M1-26-T-247A
The contract specifies the procurement of one adjustable resistor with NSN 5905-00-257-8471 under solicitation SPE7M1-26-T-247A, with a required delivery within twenty days to FPO AP 96662 aboard the USS CHUNG HOON DDG 93. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including special marking code ZZ and palletization per RP001. Packaging must include a unit package marking in accordance with IPC/JEDEC J-STD-609 to identify lead content or lead-free status on each individual unit. The contract strictly prohibits the use of any Class I ozone-depleting substances in manufacturing or processing unless prior written approval is obtained from the Contracting Officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its packaging, with limited exceptions for specific functional applications like batteries and sensors as defined by NAVSEA. All portable fluorescent lamps or instruments containing mercury must include a secondary containment barrier. The resistor must be sourced from approved vendors including WARD LEONARD CT LLC, OHMITE HOLDING L.L.C., ELECTRO ENGINEERING PRODUCTS CO INC, STROMBERG-CARLSON CORP, and HAMILTON SUNDSTRAND CORPORATION under their specified part numbers. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Preservation methods must exclude mercury or mercury compounds, and all packaging must follow DLA guidelines. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, under NAICS code 334416, and is managed by the Department of Defense’s Maritime Supply Chain through the DLA.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-246W
The contract specifies the procurement of 2 fixed chip resistors with NSN 5905-01-611-0811 under solicitation SPE7M1-26-T-246W, requiring delivery within 80 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and unit packaging codes, with all marking adhering to MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on each individual unit pack. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and includes detailed parcel post and shipping instructions. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions. The resistors are supplied by Northrop Grumman Systems Corporation and State of the Art, Inc., under their respective part numbers, and the contract mandates compliance with DLA transport and freight procedures as noted in DLAD Proc Notes C19 and C20. The original delivery deadline is December 27, 2026, with a needed ship date of November 3, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-365J
This contract specifies the procurement of 12 fixed film resistors with part number RK73H2ALTD2212F and NSN 5905-01-655-0207 under solicitation SPE7M5-26-T-365J. The item must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E and DLA packaging standards, including specific preservative methods, wrapping materials, and unit container codes. Marking is to follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA packaging guidelines. Delivery is due within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and the shipment destination is the Army Aviation Depot in Tainan City, Taiwan, with designated point of contact and freight details provided. The requested delivery date is August 4, 2026, and the contract is governed by DLA procedures for freight forwarding and transportation.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M1-26-T-246L
The contract specifies the procurement of a variable wire wound resistor, nonprecision, identified by NSN 5905-00-764-0416 and part number M22/01-00211UB, with a required quantity of six units to be delivered within 16 days after issuance of the purchase request. The item must comply with MIL-PRF-22/1D and MIL-PRF-22E(Sup 1A) technical specifications and is designated as a critical application item, requiring adherence to strict quality and performance standards. The contractor must source components from qualified products or manufacturers lists as defined by applicable procurement notes, and all units must bear lead finish markings per IPC/JEDEC J-STD-609, clearly identifying lead content on each individual unit package. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with special code ZZ addressing additional requirements. The contract strictly prohibits the use of class I ozone-depleting substances in any phase of manufacturing or processing unless written approval is obtained from the contracting officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its contact surfaces, with limited exceptions for functional uses in defined applications such as specific batteries, lighting, sensors, or chemical reagents approved by NAVSEA. Portable mercury-containing devices must be shockproof with secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring upon arrival. The unit price is $6.00 per unit, total value is $36.00, and the contract includes no quantity variance. The solicitation was issued under contract number SPE7M1-26-T-246L, with a response deadline of August 14, 2026, and an original required delivery date of April 12, 2026. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M5-26-T-344H
This contract specifies the procurement of a fixed wire-wound resistor, identified by NSN 5905-01-229-8489 and part number RWR80S6000BS, manufactured to meet military specification MIL-PRF-39007K, Revision K dated September 30, 2023. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with compliance tracked via R and I numbers. Use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, though this restriction does not extend to commercial items as defined in FAR 11.001 or part-numbered-only items. The resistor must be sourced from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List, as this NSN is designated as primary on those lists. Packaging must conform to MIL-STD-2073-1E with specific procedures for preservation, cleaning, wrapping, and unit packaging, and all items must be marked per MIL-STD-129 with a special marking code ZZ for additional requirements. Each unit package must also include lead finish markings in accordance with IPC/JEDEC J-STD-609, identifying whether the component is lead-free or contains lead, with proper placement as specified in the standard. The delivery requirement is 89 units to be shipped FOB origin within 168 days, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, with final delivery directed to DLA Distribution Depot Hill, Hill AFB, Utah. The solicitation was released on July 23, 2026, with responses due by August 3, 2026, under contract number SPE7M5-26-T-344H, and the original required delivery date is January 8, 2027, though the needed ship date is January 19, 2027. The point of contact for inquiries is Jeanette Heisey of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-337N
The contract is for the procurement of 103 shielding gaskets, electronic, identified by NSN 5999-01-259-2658, with a unit price of $103.00 and a total contract value of $10,609. The item must be supplied by HAMBLIN MFG CORP, part number 688025-284, under solicitation SPE7M5-26-T-337N. Delivery is due 157 days after award, with FOB ORIGIN terms meaning title and risk transfer upon delivery to the carrier at the contractor’s location. The final destination for delivery, inspection, and acceptance is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, cushioning materials, container types, and packaging code U. Marking must adhere to MIL-STD-129 with no special marking required, and barcoding must utilize Code 39 or Code 128. The gasket must not contain mercury or mercury compounds except as permitted for batteries, fluorescent lamps, sensors, or specific naval instruments, and any mercury-containing portable lamps or instruments must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is prohibited in all phases of design, manufacturing, and testing unless the Contracting Officer grants separate written approval. Compliance with the Hazard Communication Standard (29 CFR 1910.1200) and DFARS clause 252.223-7001 mandates accurate labeling, submission of Safety Data Sheets pre-award, and adherence to all hazard data reporting requirements. The contract incorporates numerous FAR and DFARS clauses relating to cybersecurity (NIST SP 800-171, Basic Safeguarding), trafficking in persons, employment eligibility, sustainable products, and prohibition of covered telecommunications equipment from Chinese military companies. Payment must be submitted electronically via Wide Area WorkFlow, and all offerors must maintain an active UEI and CAGE code. Offerors must also represent their small business status, including HUBZone, 8(a), or SDVOSB eligibility, and disclose any joint ventures. All technical and quality requirements are governed by the DLA Master List of Technical and
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, MET
Solicitation # SPE7M5-26-T-140B
The contract is for the procurement of eight fixed metal capacitors with the NSN 5910-01-490-0335 under solicitation SPE7M5-26-T-140B, with a delivery requirement of 168 days after order. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The items must comply with DLA packaging requirements and physical identification standards, including bare item marking. Mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. The offeror must provide a complete data package for both the approved and alternate parts since no data is currently available. The contracting activity is the Department of Defense’s Active Devices Division, with performance based in Tracy, California, and the point of contact listed as Matthew Stanko, reachable via email and phone provided. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, under NAICS code 334416 for electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
Electrical Grounding Strip Manufacturing and SupplyThe contract entails the manufacture and delivery of a single electrical grounding strip identified by NSN 5999-01-738-6818, which must adhere strictly to all applicable military standards for packaging, marking, and documentation. Delivery is required within 20 days after contract award, with terms specified as FOB Destination, meaning the supplier assumes responsibility for all costs and risks until the item reaches the designated delivery point. The item is classified under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing, and the solicitation is structured as a subcontract under the Department of Defense, specifically managed by the Active Devices Division. The place of performance is listed as FPO with a ZIP code of 34091, suggesting delivery to a military postal address, likely for overseas or deployed operations. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, leaving a two-week window for offer submission.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the provision of comprehensive regulatory compliance services for hazardous materials, with a primary focus on the preparation, validation, and ongoing maintenance of Safety Data Sheets in strict alignment with OSHA 29 CFR 1910.1200, DFARS 252.223-7001, and MIL-STD-129 standards. This includes ensuring all documentation meets federal requirements for hazard communication, material handling, and labeling, particularly for defense-related operations and supply chains. The work must support accurate, current, and compliant SDS documentation across all phases of product lifecycle management, with an emphasis on regulatory accuracy and audit readiness. The contract is classified as a subcontract under NAICS code 541690, with a response deadline of August 14, 2026, and performance to be conducted at a designated location in Dulles, Virginia, with a zip code of 20166-7629. It is issued by the Active Devices Division under the Department of Defense, indicating a direct connection to defense logistics and procurement activities. The services are critical to ensuring compliance across military and civilian supply chains, and contractors must demonstrate expertise in federal hazardous materials regulations and experience with DoD-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
International Freight and Delivery Logistics (FOB Origin)The contract entails the coordination and execution of international freight and delivery logistics for shipments destined to Israel, with all responsibilities beginning at the origin point under FOB terms. The contractor is required to manage comprehensive export documentation and strictly adhere to Department of Defense compliance requirements throughout the transportation process. This subcontract is classified under NAICS code 488999, indicating it involves other support activities for air, rail, and water transportation, and is issued by the Active Devices Division of the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the place of performance is tied to the origin point of shipment and final delivery in Israel, with no specific location details provided beyond the destination country. The contract does not specify a set-aside type or point of contact, and all participation must align with DOD regulatory and security protocols.
All Other Support Activities for Transportation

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable DFARS clauses for the identification, classification, and labeling of hazardous components. The work involves ensuring all chemical substances and mixtures used or handled under the subcontract are accurately assessed for health and physical hazards, properly classified according to GHS standards, and labeled with standardized hazard statements, pictograms, and precautionary information. The contractor must maintain documentation that supports the classification process and aligns with federal regulatory requirements for defense-related supply chains. The contract is issued under NAICS code 541690 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Active Devices Division. It is open for response until August 14, 2026, with the solicitation posted on August 3, 2026. Performance location details are unspecified, but the work is expected to support defense material handling and supply chain integrity. All deliverables must meet stringent compliance benchmarks to ensure workplace safety and regulatory alignment across DoD operations.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military Marking and Labeling ServicesThe contract pertains to the application of military-compliant markings and labels in accordance with MIL-STD-129, requiring precise implementation of data matrix barcodes, handling instructions, and hazardous material warnings to ensure proper identification and safety throughout the supply chain. This work is essential for compliance with Department of Defense standards and must be executed with accuracy to support logistics, storage, and transportation of military equipment and supplies. The solicitation is issued as a subcontract under NAICS code 561910, indicating it falls within miscellaneous business support services, and is managed by the Active Devices Division within the Department of Defense. The opportunity was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and performance will occur at an unspecified location governed by defense logistics requirements. Although no specific place of performance or point of contact is provided, the work will be conducted under the auspices of the Defense Logistics Agency and must adhere to all regulatory and technical specifications tied to military labeling protocols. Interested parties are directed to the DIBBS portal for full solicitation details.
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging of delivered connectors in strict compliance with MIL-STD-2073-1E standards for preservation, handling, and transport, ensuring all materials and methods used are officially approved for military applications. This effort is focused on maintaining the integrity and functionality of the connectors throughout storage and transit by adhering to rigorous environmental and procedural controls outlined in the standard. The work must be performed under the specifications mandated by the Department of Defense’s Active Devices Division and is classified as a subcontract under NAICS code 561910, which covers support services for packaging and preservation. Proposals must be submitted by the stated deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. There are no set-aside designations or specified geographic restrictions for performance, and the physical location of performance is not defined in the provided details. The contract is accessible through the DIBBS platform under solicitation number SPE7M526T365U, and while no point of contact is listed, bidders are expected to follow all federal and military packaging protocols without deviation. The success of this contract hinges on flawless execution of preservation techniques and documentation aligned with military-grade logistics requirements.
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Manufacturing of Electrical Receptacle ConnectorsThe contract requires the fabrication and assembly of ten units of military-spec electrical receptacle connectors meeting the National Stock Number 5935016645750 and all associated technical and performance standards. These connectors must adhere to stringent defense-grade specifications to ensure reliability, durability, and interoperability in operational environments. The work is structured as a subcontract under the NAICS code 335312, which classifies it within the electrical equipment manufacturing sector, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, giving potential bidders a defined window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal for full documentation and submission. There is no set-aside designation or procurement preference indicated, meaning the opportunity is open to all qualified suppliers capable of meeting the technical and production requirements.
Motor and Generator Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to DLAThe contract requires the final shipment and delivery of packaged resistors to the Defense Logistics Agency through established logistics channels, utilizing DLA’s Vendor Shipment Module and AMPS registration to ensure compliance with federal supply protocols. All deliveries must be routed to Hill Air Force Base, specifically to the zip code 84056-5734, and must adhere strictly to DLA’s procedural and documentation standards to facilitate seamless receipt and inventory integration. This subcontract, classified under NAICS code 484220 for truck transportation, is issued by the Active Devices Division within the Department of Defense and carries a response deadline of August 14, 2026, with the solicitation posted on August 3, 2026. Contractors must confirm their AMPS registration status and validate logistics pathways in advance to avoid delivery delays or contract noncompliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Packaging and Labeling Services for Defense ElectronicsThe contract requires the provision of packaging and labeling services for resistor units in strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring all units meet Department of Defense standards for durability, traceability, and uniformity. Hazard communication labels and Safety Data Sheets must be included wherever applicable, aligning with regulatory requirements for safe handling and transport of defense electronics components. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, and all deliverables must be ready to support military logistics and inventory systems without deviation. This subcontract is issued under NAICS code 561990 and is managed by the Active Devices Division under the Department of Defense. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 14, 2026. All proposers must demonstrate full capability to meet the technical specifications, including compliance with military standards for both internal packaging integrity and external labeling accuracy. Failure to adhere to any requirement may result in rejection, and successful contractors must be prepared to support ongoing defense supply chain operations with consistent, auditable quality.
All Other Support Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Manufacture and Supply of Fixed Wire ResistorsThe contract calls for the manufacture and delivery of seven fixed wire resistors with the National Stock Number 5905010619055, manufactured to meet the technical, packaging, and marking standards set by the Defense Logistics Agency, including adherence to J-STD-609 and RP001 specifications. All units must be produced and packaged in strict compliance with these military-grade requirements to ensure interoperability and quality assurance for defense applications. The place of performance is designated as Hill Air Force Base with ZIP code 84056-5734, indicating where the finished product must be delivered or where operational integration is expected. The solicitation, issued under the NAICS code 334418 for other electronic component manufacturing, is classified as a subcontract and was posted on August 3, 2026, with responses due by August 14, 2026. The contracting activity is managed by the Active Devices Division within the Department of Defense, and the opportunity is accessible through the DIBBS platform under solicitation reference SPE7M526T365M.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication & SDS Compliance SupportThe contract requires the preparation and submission of Safety Data Sheets and hazard warning labels for electronic components, ensuring full compliance with OSHA 29 CFR 1910.1200, DFARS, and Federal Standard No. 313. This work involves accurately documenting chemical hazards, proper classification, and clear labeling of materials to meet federal regulatory standards for workplace and defense supply chain safety. All deliverables must align with the specific formatting, content, and dissemination requirements mandated by these regulations to support safe handling, storage, and usage across military and contractor environments. This subcontract is issued by the Active Devices Division under the Department of Defense with a place of performance designated as FPO, ZIP 96663. It is classified under NAICS code 541690 for other scientific and technical consulting services, indicating a need for specialized regulatory and technical expertise. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is available through the DIBBS system. While no set-aside type is specified, the contract is intended for qualified subcontractors capable of delivering compliant hazard communication documentation under defense supply chain requirements.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThis contract requires the provision of military-compliant packaging, preservation, kitting, palletization, and labeling services for electronic components in accordance with DLA RP001, MIL-STD-129, and MIL-STD-2073-1E standards to support military logistics operations. All work must adhere strictly to Department of Defense specifications to ensure compatibility with military supply chain requirements, including proper labeling, unitization, and environmental protection of sensitive electronic parts during transit and storage. The services are intended for shipment via military channels and must meet rigorous durability, traceability, and compliance benchmarks to facilitate seamless handling at military facilities. The contract is classified as a subcontract with a NAICS code of 488999 and is being managed by the Active Devices Division under the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96663, indicating delivery to a military post office location, typically for overseas or expeditionary use. Responses are due by August 14, 2026, with the solicitation posted on August 3, 2026. Interested parties must submit proposals through the DIBBS platform using the provided link to be considered for award, and compliance with all military packaging and labeling regulations is non-negotiable for contract fulfillment.
All Other Support Activities for Transportation

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details