Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHIFTER FORK, NONVEH

Active
SPE7L1-26-T-842RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a shifter fork, nonvehicle, for use on a 24-volt starter motor installed on Caterpillar D-5 tractors with serial numbers 6R704 through 6R711. The part is identified by Caterpillar part number 2P8825 and Prestolite Electric part number K185104693S, with the NSN 3010-01-068-6996. A total quantity of 187 units is required, each priced at $187.00, for a total contract value of $34,939.00. The item must be delivered within 154 days from the contract award, with delivery terms FOB origin and inspection and acceptance occurring at the destination. The item is subject to strict packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special marking required. Packaging and palletization must comply with DLA packaging requirements, and the shipment must be directed to the designated receiving warehouse in Tracy, California. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, superseding any conflicting specification provisions while maintaining all product performance requirements. Authorization and approval are mandatory for any substitute chemicals. The material has no shelf life limitation. The procurement is administered under solicitation SPE7L1-26-T-842R, issued by the Department of Defense’s Land Supply Chain, with a response deadline of July 27, 2026, and a required ship date of December 29, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and covered defense information protocols apply as relevant.

General Info

Procure 187 shifter forks for Caterpillar D-5 tractors, $187 each, deliver to Tracy CA by Dec 29, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7L1-26-T-842R

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
DILLON JAMES
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHIFTER FORK,NONVEH
SHIFTER FORK
USED ON 24 VOLT STARTER MOTOR USED ON CATERPILLAR TRACTOR MODEL D-5
SERIAL NUMBER 6R704 THRU 6R711.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CATERPILLAR INC 11083 P/N 2P8825
PRESTOLITE ELECTRIC INC 24975 P/N K185104693S
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527743 0001 EA 187.000
SPE7L1-26-T-842R
SECTION B
PR: 7017527743 PRLI: 0001 CONT’D
NSN/MATERIAL:3010010686996
DELIVERY (IN DAYS):0154
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:02
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E6 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/29/2026 Original Required Delivery Date:10/14/2026
SPE7L1-26-T-842R NSN/Part Number: 3010-01-068-6996 Quantity: 187 EA Purchase Request: 7017527743QTY: 187 Delivery: 154 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
Gearbox Assembly and Integration
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 333612
New
DIBBS
Fire Pump and Water Delivery System IntegrationThe contract involves the supply and integration of a fire pump system along with associated piping, valves, nozzles, and control components designed to enable effective water delivery operations on military fire trucks. This subcontract is part of a broader effort by the Defense Logistics Agency under the Department of Defense to enhance the firefighting capabilities of emergency response vehicles by equipping them with a fully functional, integrated water delivery system. The NAICS code 333612 indicates the work falls under the manufacturing of other commercial and service industry machinery, specifically related to fire service equipment. The system must meet stringent performance and reliability standards to ensure operational readiness in high-risk environments. The contract was posted on July 17, 2026, and the place of performance and point of contact details are not specified, though procurement is managed through the DLA’s procurement portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 333612
New
DIBBS
TRANSMISSION, MECHANThe contract pertains to the procurement of a single mechanical transmission unit with NSN 3010-01-693-0501, requiring delivery within 20 days of award. Technical and quality specifications are referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have Government identification removed prior to return. The solicitation number is SPE7L1-26-T-556P, issued on July 17, 2026, with responses due by July 22, 2026. The NAICS code is 333612, and the procuring agency is the Department of Defense’s Land Supply Chain under the Federal acquisition system. Performance is designated for Pascagoula, Mississippi, 39568, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333612
New
DIBBS
CHAIN ASSEMBLY, ROLLThe contract pertains to the supply of one unit of a chain assembly, roll with NSN 3020-01-650-1497, under solicitation SPE7L1-26-T-797P, with a response deadline of July 22, 2026, and a required delivery within 20 days after order placement. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The item is subject to strict cybersecurity controls, requiring the contractor to be certified at CMMC Level 2 by an accredited C3PAO, and all covered defense information must be handled in accordance with applicable regulations. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specifications. Technical data associated with this item is controlled under ITAR or EAR, and its export or disclosure to foreign persons—even within the United States—is prohibited without authorization. Only contractors with approved JCP certification, completed DOD export control training, and DLA approval may access this data. The place of performance is Fort Stewart, Georgia, and all work must be conducted under the oversight of the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333612
New
DIBBS
Precision Helical Gear ManufacturingA subcontract has been issued for the manufacture and supply of one precision helical gear designated as NSN 3020-00-814-1885 with part number 589540-1, classified as a critical application item requiring strict adherence to military technical standards and DLA-approved manufacturer specifications. The component must meet exacting performance and quality benchmarks suitable for defense systems, ensuring reliability and durability under operational conditions. The work is to be performed at New Cumberland, Pennsylvania, with a submission deadline of July 27, 2026, and the solicitation was posted on July 16, 2026. The contract falls under NAICS code 333612 for machine shop, lathe, and related manufacturing services and is managed by the Department of Defense under Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
Supply of Angle Drive Unit (NSN: 3010011177624)The contract involves the procurement and delivery of a commercial off-the-shelf angle drive unit identified by NSN 3010011177624, which must fully comply with military packaging, preservation, and labeling requirements to ensure operational readiness and logistical compatibility. The item is intended for use within defense supply chains and must meet all applicable military specifications for handling and storage, even though it is a commercially available product. The solicitation is structured as a subcontract under the Department of Defense’s Land Supply Chain, targeting vendors capable of fulfilling military-grade standards without custom manufacturing. The contract was posted on July 16, 2026, with a response deadline of July 27, 2026, and is managed under NAICS code 333612 for other engine equipment manufacturing. The place of performance is listed as FPO with ZIP code 96667, indicating delivery to a military postal address, consistent with overseas or deployed operations. This procurement aims to streamline acquisition through existing commercial supply chains while enforcing stringent defense logistics protocols, ensuring the unit arrives in a state ready for immediate installation and use in fielded military systems.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
Electrical Solenoid Manufacturing & AssemblyThe contract calls for the manufacture and final assembly of 20 electrical solenoids with part number SBC-4401F-1, requiring full compliance with both military and commercial specifications. Each unit must be lead-free marked and properly labeled to meet regulatory and operational standards. The work is classified as a subcontract under NAICS code 333612 and is being managed by the Active Devices Division of the Department of Defense. Performance is to be carried out at a designated location in New Cumberland with ZIP code 17070-5002. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, indicating a narrow window for proposal submission and evaluation. The contract does not specify a set-aside category, suggesting it is open to all eligible contractors without preference for small, veteran-owned, or other specialized business categories.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
Fuel Pump Supply and DistributionThe contract involves the supply of five units of metering and distributing fuel pumps identified by NSN 2910015172754, with all items required to be packaged and labeled in full compliance with military specifications. Delivery must be completed to Tracy, California, with the ZIP code 95304-5000 as the designated place of performance. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, ensuring opportunities for small business participation in defense-related procurement. The North American Industry Classification System code 333612 applies, classifying the work under the manufacturing of other engines and turbines. The contract was posted on July 16, 2026, with responses due by July 27, 2026, and is managed by the LAND SUPPLIER OPNS ENGINES under the Department of Defense. All technical, packaging, labeling, and delivery requirements must be met to fulfill contractual obligations.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
GEAR, HELICALThis contract solicits one helical gear with NSN 3020-00-814-1885 and part number 589540-1, designated as a critical application item, sourced from approved suppliers including GALOW H CO INC, ONTIC ENGINEERING & MANUFACTURING INC, PRECISION SPEED MANUFACTURING LLC, and HAMILTON SUNDSTRAND CORPORATION. The requirement is governed by technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The item must be packaged in strict accordance with MIL-STD-2073-1E, using specific preservation methods, containment, and packaging codes, and marked per MIL-STD-129 with no special marking required. Delivery is FOB origin with zero variance allowed in quantity and inspection and acceptance occurring at destination. The delivery timeline allows 202 days from the contract award, with a required ship date of February 15, 2027, and the destination for shipment is the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation instructions and freight shipping details are governed by DLA procedural notes C19 and C20. The solicitation, issued under SPE7L5-26-T-4479, was posted on July 16, 2026, with a response deadline of July 27, 2026, and falls under NAICS code 333612 for gear and gear box manufacturing.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
INSERT, FLEXIBLE COUThis contract is a unilateral indefinite delivery contract under solicitation SPE7L1-26-U-0474, issued by the Defense Logistics Agency on behalf of the Department of Defense for the procurement of a single unit of an Insert, Flexible Coupling (Shear Cartridge), identified by NSN 3010013687699 and manufacturer part numbers CB75325 and CD75321. The contract is a total small business set-aside under NAICS 333612, with a minimum order quantity of one unit at a unit price of $6,615.00, and a maximum total contract value ceiling of $350,000.00. Delivery is required within 126 days from the award date with FOB origin terms, meaning title and risk transfer to the government upon shipment from the contractor’s facility. Inspection and acceptance occur at the destination point, and the government retains full authority to verify conformance with all technical, packaging, and safety requirements. The item must comply with stringent federal and military specifications including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and DLA’s RP001 for palletization. All packaging must incorporate specific preservation methods, materials, and unit containers as defined, and no special marking is required beyond standard compliance. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for approved exemptions such as functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; in those cases, portable mercury-containing devices must be shockproof and have secondary containment per NAVSEA 5100-003D. Hazard communication standards under OSHA 29 CFR 1910.1200 must be followed, with Safety Data Sheets submitted prior to award. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, small business subcontractor payments, prohibited procurement of Chinese military equipment, electronic invoicing via WAWF, whistleblower protections, and safeguarding government information systems, requiring full compliance throughout performance. Offerors must be active in SAM, possess a valid UEI and CAGE code, and submit proposals electronically via the DLA-BSM Bid Board System by the July 31, 202
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333612
New
DIBBS
HANDWHEELThe contract pertains to the procurement of three handwheels identified by NSN 5340-01-452-1621 under solicitation SPE7L1-26-T-844N, with a response deadline of July 27, 2026, and delivery required within 225 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The contract is subject to Covered Defense Information requirements and strictly prohibits the intentional addition of mercury or mercury-containing compounds to the handwheels or their contact surfaces, with limited exceptions for functional uses in batteries, lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment as per NAVSEA 5100-003D. The contractor must be certified by a CMMC Level 2 C3PAO, and the procurement is open to full and open competition. Technical data associated with the item is subject to ITAR or EAR export controls, requiring authorization for any disclosure to foreign persons regardless of location, and is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA approval for access. Specific compliance with DFARS 252.225-7048 is mandated. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to the primary point of contact, Michael Nordahl, at the provided DLA email and phone number.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
GEARSHAFT, WORM WHEEThe contract is for the procurement of a gearshaft and worm wheel with NSN 3040-01-549-1854 and part number 16D33-UG, quantities totaling 28 units at a unit price of $28.00, resulting in a total contract value of $784. Delivery is required within 94 days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. Packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must adhere to DLA Packaging Requirements for Procurement, with all technical and quality standards governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other referenced standards. The item is to be delivered to DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with an original required delivery date of October 14, 2026, and a need ship date of October 30, 2026. The solicitation number is SPE7L3-26-T-121N, posted on July 16, 2026, with responses due by July 27, 2026, under NAICS code 333612, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with primary point of contact Karen McCarley.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
Supply of Protective Dust and Moisture Seal CapsThe contract calls for the supply of 1,497 protective dust and moisture seal caps, identified by NSN 5340-01-632-8239 and part number 806661-01, for use by the Department of Defense. These components are critical for safeguarding equipment against environmental exposure, ensuring operational readiness in demanding conditions. Delivery must be completed in accordance with defense logistics standards, and all invoicing must comply with the Wide Area WorkFlow system to facilitate seamless payment processing and contractual accountability. The requirement is classified as a subcontract under NAICS code 332510, indicating manufacturing of other fabricated metal products, and performance is specifically designated for New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation was posted on July 17, 2026, with responses due by July 23, 2026, providing a narrow six-day window for qualified vendors to submit proposals. The contract is managed under the Land Supply Chain division of the Department of Defense, underscoring its importance to ground equipment maintenance and logistics sustainment.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332613
New
DIBBS
Small Business Subcontracting ParticipationSmall businesses certified as HUBZone, SDVOSB, WOSB, or DBE are invited to participate as suppliers of springs or as distributors under the Nonmanufacturer Rule to support prime contractors seeking evaluation preferences in a Department of Defense procurement. The opportunity is tied to NAICS code 332613 for spring manufacturing and requires eligible firms to provide springs directly or act as a distributor in compliance with subcontracting guidelines designed to enhance small business involvement. Performance of the work is centered in Greensboro, North Carolina, with a zip code of 27409, and responses must be submitted by July 21, 2026. Participation is intended to strengthen the supply chain through targeted subcontracting opportunities that align with federal small business objectives, though the exact scope of requirements and volume of expected deliveries are not specified in the posting. Interested parties should access the full solicitation via the provided DIBBS link for detailed submission instructions and evaluation criteria.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Greensboro, NCThe contract requires the transportation and delivery of packaged springs to Greensboro, NC, with full compliance to DLAD Proc Note C20 and federal logistics standards, ensuring all shipping procedures meet Department of Defense specifications. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of freight, and the place of performance is firmly designated as Greensboro with a zip code of 27409. The solicitation was posted on July 17, 2026, with a strict response deadline of July 21, 2026, leaving a four-day window for potential vendors to submit proposals. The contracting agency is the Land Supply Chain under the Department of Defense, and while specific contact details are not provided, the official solicitation can be accessed via the DIBBS platform using the referenced link.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Palletization ServicesThe contract requires the provision of packaging, preservation, and palletization services for springs in full compliance with military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all procedures meet Department of Defense requirements for durability, protection, and traceability during storage and transit. All items must be properly marked and aligned with DLA RP001 guidelines to guarantee accurate identification and inventory management across the supply chain. Work must be performed with strict adherence to specified military specifications to maintain readiness and logistical efficiency. The solicitation, issued by the Department of Defense under the Land Supply Chain division, is categorized as a subcontract with a NAICS code of 493190 and has a response deadline of July 21, 2026. Performance is required at the designated location in Greensboro, North Carolina, with a ZIP code of 27409. The posting date indicates the opportunity was made available on July 17, 2026, and interested parties must submit their proposals within the four-day window to be considered. All activities must comply with federal procurement protocols and be executed to ensure seamless integration into DLA logistics systems.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
Compression Spring Supply (NSN 5360003912317)The contract requires the manufacture and supply of 1,667 helical compression springs to meet precise military specifications under National Stock Number 5360003912317, ensuring full compliance with established material and dimensional standards. First article testing is a mandatory requirement to verify that the initial production units conform to all technical and performance criteria outlined in the military specifications. The springs must be produced and delivered in alignment with quality control protocols typically expected for defense-related components, with the place of performance specified as Greensboro, North Carolina, 27409. This subcontract, issued under NAICS code 332613 for spring manufacturing, falls under the jurisdiction of the Department of Defense through the Land Supply Chain office. The solicitation was posted on July 17, 2026, with a response deadline set for July 21, 2026, indicating a highly compressed procurement timeline designed to meet urgent operational needs. All submissions must demonstrate capability to meet the exacting standards required by the military, including material integrity, dimensional accuracy, and test validation, with failure to comply potentially disqualifying offers or leading to rejection of deliverables.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332721
New
DIBBS
Small Business Subcontracting Participation (Set-Aside Opportunity)Small businesses classified as SDVOSB, WOSB, or HUBZone are invited to engage in manufacturing, quality assurance, packaging, or logistics activities under a subcontracting opportunity tied to a Department of Defense contract. The prime contractor is required to meet specific subcontracting goals, creating a targeted pathway for eligible small businesses to participate in the supply chain supporting land-based defense operations. This opportunity is linked to NAICS Code 332721, which pertains to metal forging and stamping, indicating the work involves precision metal component production or related services. The solicitation opens on July 17, 2026, and responses are due by July 31, 2026, with all participation coordinated through the DLA’s DIBBS portal. While no specific location is listed, performance is expected to support the Land Supply Chain organization, and no set-aside designation is specified, meaning participation is driven by the prime contractor’s subcontracting obligations rather than a formal government set-aside.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 484220
New
DIBBS
Defense-Compliant Supply Chain & Logistics for FDT ProgramThe contract under the First Destination Transportation program requires comprehensive logistics and transportation support to deliver manufactured inserts to government-designated locations using transport arranged by the government. It is a subcontract governed under NAICS code 484220, indicating a focus on truck transportation services, and is managed by the Department of Defense through its Land Supply Chain organization. All activities must comply with Defense supply chain standards, ensuring secure, timely, and fully traceable movement of inserts from the point of manufacture to the final destination as directed by federal authorities. The contract is set to solicit bids through July 31, 2026, with the opportunity posted on the DIBBS platform, and performance will occur at locations determined by the government without specified geographic constraints.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Self-Locking Insert (Critical Application Item)The contract entails the precise manufacturing and supply of 681 self-locking inserts designated as Critical Application Items, requiring strict adherence to MIL-STD-1330E specifications and all associated technical data package requirements. These components are essential for high-reliability applications, demanding rigorous quality control, material traceability, and dimensional accuracy to meet military-grade performance standards. The work must be executed in full compliance with the technical documentation and quality assurance protocols defined by the Department of Defense. This is a subcontract opportunity under the NAICS code 332721, posted by the LAND SUPPLY CHAIN office of the Department of Defense, with a response deadline of July 31, 2026. The place of performance and specific location details are not provided, but the deliverables are intended for defense-related systems where failure is not an option. Interested parties must submit proposals before the deadline through the designated DIBBS portal to be considered for award.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract pertains to the procurement of 10 units of a knob identified by NSN 5355-00-995-2022 under solicitation SPE7L1-26-T-799K, with a response deadline of July 22, 2026, and a required delivery within 20 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. The item must not contain any Class I ozone-depleting chemicals, and any proposed substitutes must be submitted for approval unless already authorized by the governing specifications. Export control restrictions apply to associated technical data under ITAR or EAR, requiring compliance with DFARS 252.225-7048; only contractors with approved US/Canada Joint Certification Program status, completed DOD training, and DLA authorization may handle or access the data. Additionally, the contractor must be certified at CMMC Level 2 by an accredited C3PAO. All government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. The contracting office is the Department of Defense’s Land Supply Chain under the Defense Logistics Agency, with Kristina Derry listed as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract is for one mounting plate with NSN 5340-01-618-0709 and part number 2BF205, procured under solicitation SPE7L1-26-T-797L for the Department of Defense through the Land Supply Chain. Delivery is required within 10 days of award, FOB origin, with no tolerance for quantity variance. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes applied. Packaging must comply with DLA’s procurement requirements, including palletization standards and use of specific containment and preservation methods. All shipments must be sent by the fastest traceable means, excluding parcel post, to the designated military address in El Paso, Texas. The delivery destination and mark-for address are identical, linked to a specific unit and building within the installation. Inspection and acceptance occur at the destination point. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision determined by the solicitation or award date. The required delivery date is July 1, 2026, and the contract includes government-only codes for tracking and logistics use.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUSTThe contract specifies the procurement of 1,895 protective dust and moisture seals with NSN 5340-01-632-8239 under solicitation SPE7L1-26-Q-1330, with a mandatory delivery deadline of 165 days after award. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any industry standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 for labeling and markings, as well as RP001 for DLA-specific packaging guidelines. Hazardous materials, if any, must be packaged per FED-STD-313 and TQ requirement IP025, while non-hazardous items require commercial packaging consistent with ASTM D3951 unless overridden by DLA’s technical requirements. Inspection and acceptance occur at destination, with zero tolerance for quantity variance. The item must be palletized and shipped to the specified DLA distribution facility in New Cumberland, Pennsylvania, with freight and transportation governed by DLAD procedural notes C19 and C20. All documentation for source approval, removal of government identification from non-accepted supplies, and compliance reporting must follow RC001 and RQ011 protocols. The unit of issue is each, and all packaging and labeling must reflect the correct U/I and QUP as defined in the contract. The contract was issued on July 17, 2026, with responses due by July 24, 2026, and the ultimate delivery target date is January 21, 2027.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details