Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Shock and Vibration Testing for Submarine-Grade Components

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech agency, involves the environmental qualification testing of electromechanical components. The primary objective is to validate that these components comply with rigorous submarine shock and vibration standards, specifically referencing MIL-STD-167 and MIL-STD-810. The project is categorized under NAICS code 541380 and is scheduled for performance in Cheswick. This effort ensures that critical submarine-grade hardware can withstand the extreme operational stresses associated with naval environments.

General Info

DoD subcontract for environmental qualification testing of submarine electromechanical components in Cheswick.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Cheswick, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010426FZX00.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

61--SPU PARTS KIT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Environmental qualification testing of electromechanical components to validate compliance with submarine shock and vibration standards such as MIL-STD-167 and MIL-STD-810.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 9 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 9 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 9 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 14 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

QPL-Qualified O-Ring SupplyThis subcontract involves the supply of high-performance O-rings for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The primary requirement is the procurement of O-rings exclusively from Qualified Products List manufacturers, with a mandatory certification of qualification according to MIL-PRF-25732E standards. The opportunity is categorized under NAICS code 326199 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

All Other Plastics Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Specialized Fastener Supply (Hex Cap Screws)This subcontract involves the procurement and delivery of military-grade Type I Hex Cap screws for prime contractors supporting Navsup Weapon Systems Support Mech projects. All supplied fasteners must be manufactured in strict accordance with MIL-DTL-1222 specifications to meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Nickel-Aluminum-Bronze Material SupplyThis subcontract involves the supply of raw Nickel-Aluminum-Bronze material to prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The supplier is responsible for delivering raw stock that strictly adheres to ASTM B150/B150M chemical and physical property standards. A critical requirement of the contract is the provision of certified mill certifications to verify the material composition and origin, with a specific mandate that all supplied material must be certified mercury-free. The opportunity is categorized under NAICS code 423510, with a response deadline set for November 27, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Gland Actuator Fabrication and AssemblyThis subcontract involves the precision machining and assembly of three Gland Actuators for Navy submarine projects under the Navsup Weapon Systems Support Mech. The scope of work includes machining components according to technical drawings, executing First Article Testing and Inspection, and performing NDT liquid penetrant inspection within a mercury-free environment. To be eligible, contractors must hold ISO 9001 or MIL-I-45208 certification and ensure full compliance with MIL-STD-130 and MIL-STD-973 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 27, 2026, falling under NAICS code 332710 for the Department of Defense.

POSTED

about 19 hours ago

DEADLINE

Precision Bearing Supply for Valve AssemblyThis subcontract involves the supply of high-precision ball or roller bearings for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg valve restoration projects. The provider must deliver certified bearings that meet the exact technical specifications for NIIN 015505005, ensuring all components are suitable for valve assembly under NAICS code 332510. A critical requirement of the agreement is strict adherence to the Buy American and Trade Agreements Act, necessitating that all delivered products originate from qualifying countries. The contract was posted on October 28, 2026, with a response deadline of November 2, 2026, for the Department of Defense.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Valve Assembly Repair and OverhaulThis subcontract involves the technical repair and restoration of a Valve Assembly (NIIN: 015505005) to support prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the disassembly, inspection, and refurbishment of internal components to ensure they meet original specifications. To guarantee functional compliance, the contractor must perform pressure testing and apply IUID data matrix marking in accordance with DFARS 252.211-7003. The final deliverable is one fully repaired and certified Valve Assembly with completed IUID registration. This project falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Tailpiece, Union (NSN 4730-01-651-0817)This subcontract involves the manufacture of 35 Tailpiece, Union units (NSN 4730-01-651-0817) for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires precision machining and fabrication utilizing CNC equipment in strict accordance with Technical Data Package Version 002. The project is governed by NAICS code 332710 and falls under the jurisdiction of the Department of Defense. Critical compliance requirements include adherence to Special Emphasis Level I quality control, the Buy American Act, and DPAS DO ratings. All finished units must be packaged and marked according to MIL-STD-2073 and MIL-STD-129 standards, respectively. Final delivery is designated as FOB Destination to Portsmouth NSY.

POSTED

about 19 hours ago

DEADLINE

Specialized Material Supply for Valve FabricationThis subcontract, titled Specialized Material Supply for Valve Fabrication, involves the procurement and delivery of raw metals and specialized alloys for prime contractors working on Department of the Navy valve fabrication projects. The supplier is responsible for sourcing materials that strictly adhere to design reference 21321-001 specifications and delivering these certified materials directly to the manufacturer. To ensure full compliance with government standards and DFARS 252.225-7036 Buy American Act requirements, the provider must supply all necessary Mill Test Reports and Material Safety Data Sheets. Managed under the Department of Defense via Navsup Weapon Systems Support Mech, the opportunity is categorized under NAICS code 332999, with a response deadline set for November 12, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacture of Linear Direct ValvesThis subcontract involves the manufacture of five Linear Direct Valves for prime contractors working on Department of the Navy projects. The scope of work includes the fabrication of valve bodies and internal components utilizing precision CNC machining to ensure strict adherence to design reference 21321-001 and Cage Code 78062 specifications. Additionally, the contractor is responsible for applying Item Unique Identification to all parent items and subassemblies. The project is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. Compliance with DFARS 252.225-7036 Buy American standards is mandatory for the delivery of the units, which are identified by NIIN 014108012. The contract falls under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Self-Locking Nuts (NASM 17828-6C)This subcontract with the Department of Defense, specifically for the Navsup Weapon Systems Support Mech, requires the procurement of 368 self-locking nuts. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5310-01-540-9579 and Part Number NASM 17828-6C according to TDP Version 006. The agreement mandates strict quality and logistical standards, including permanent traceability markings per MIL-STD-792 and packaging compliant with MIL-STD-2073. Additionally, the provider must submit IUID reporting through WAWF and furnish certificates of compliance for all Special Emphasis Material.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 19 hours ago

DEADLINE

Custom Cable Assembly FabricationThis subcontract involves the custom fabrication of five cable assemblies for prime contractors supporting Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing the assemblies according to Sippican Drawing D248895-1 Rev F and DGO Drawing 1155130-114, which includes performing all necessary electrical and mechanical testing to ensure operational integrity. To qualify, the provider must maintain ISO 9001 certification and ensure full compliance with Buy American requirements. All deliverables must adhere to MIL-STD-129 P and MIL-STD-130 N marking standards. The opportunity is categorized under NAICS code 335999, with a response deadline set for November 2, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

DMTA Testing Services

POSTED

CLOSED

Acceptance Inspection and Testing

POSTED

CLOSED

about 2 months ago

Dimensional Inspection and Material Testing

Nswc Indian Head Division

POSTED

CLOSED

about 2 months ago

Analytical Testing and Quality Control Services

Nac Federal Supply Schedule (36F797)

POSTED

DEADLINE

Quality Assurance & Testing Services

Gsa/fas Automotive Center

POSTED

CLOSED

Material Certification and Supply Chain Traceability Services

DLA Maritime - Pearl Harbor

POSTED

CLOSED

Environmental Laboratory Services and Data Validation

POSTED

CLOSED

Bioanalytical Testing and Quantification of Compound Levels

National Institutes Of Health Olao

POSTED

CLOSED

Testing Laboratory Services

POSTED

DEADLINE

Electrostatic Discharge (ESD) Sensitive Packaging

FA8203 Afsc Pzaab

POSTED

CLOSED

Medical Gas Cylinder Hydrostatic Testing and Recertification

Network Contract Office 23 (36C263)

POSTED

CLOSED

Performance Recertification and Documentation

National Institutes Of Health Olao

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS