This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on November 22, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Shrink Wrap services

Closed

71113PR230000050Federal

Submission Closed11/24/2022, 02:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326199

New

Federal

69--SKID,MOLDEDThe U.S. Department of Defense, through DLA Troop Support, is seeking quotes for 115 molded skids with NSN 6920011686145 under solicitation SPE8E626T3868, with delivery required to DLA Distribution Red River within 144 days of award. This procurement is a total small business set-aside classified under NAICS code 326199, exclusively open to small business concerns as defined by the SBA. Only approved sources listed as 81860 13031726 and 81860 13031726/04 are eligible to respond, and all quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. No specifications, plans, or drawings are available for this requirement, and responsible sources are encouraged to review the solicitation posted online by the listed deadline of August 6, 2026. The point of contact for inquiries is designated through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number, and all communication must be directed to the provided email address. The office is located in Philadelphia, Pennsylvania, with no specific place of performance identified beyond the delivery address.

POSTED

DEADLINE

Sample Disposal Pouch (SDPS-120) SupplyThe contract pertains to the supply of sample disposal pouches designated as P/N SDPS-120, which are engineered for the safe containment and proper disposal of biohazardous specimens. These pouches are critical for ensuring compliance with biosafety protocols in healthcare and laboratory environments, providing secure, leak-resistant packaging to mitigate risks associated with infectious or hazardous biological materials. The requirement is issued as a subcontract under the Health and Human Services Commission in Texas, with the North American Industry Classification System code 326199 indicating it falls under other plastic product manufacturing. The solicitation was posted on July 24, 2026, and responses must be submitted by August 18, 2026, at 4:30 PM Central Time. The place of performance and detailed contact information are not specified, but the transaction will be managed through the Texas SmartBuy portal at the provided UI link.

Health and Human Services Commission

POSTED

DEADLINE

Retroreflective Sheeting and Sign Materials SupplyThe contract calls for the supply of retroreflective sheeting, aluminum blanks, inks, and adhesives specifically engineered to meet the durability and visibility standards set by the Texas Department of Transportation for traffic sign fabrication. All materials must comply with TxDOT’s technical specifications to ensure long-term performance under harsh environmental conditions, including UV exposure, temperature extremes, and weather-induced wear. The products are essential for manufacturing high-visibility road signs that maintain nighttime reflectivity and legibility over their service life. Subcontractors are expected to deliver these materials in accordance with stringent quality control requirements and schedule deadlines, with responses due by August 14, 2026. The procurement is classified under NAICS code 326199 for other plastic product manufacturing and is open to qualified suppliers with proven experience in delivering compliant signage materials to public transportation agencies. Performance will be evaluated based on material conformity, consistent quality, and timely delivery to support TxDOT’s infrastructure and safety initiatives across the state.

Texas Department of Transportation

POSTED

DEADLINE

Red Plastic Egg Crate Manufacturing and SupplyThe contract involves the manufacture and supply of red plastic egg crates to the Texas Department of Criminal Justice, with strict requirements for consistent color, structural integrity, and full readiness for delivery to TDCJ facilities located throughout Texas. The crates must meet exacting quality standards to ensure durability and uniformity under institutional use conditions, with no flexibility permitted in material composition or finish. Bidders are expected to demonstrate production capability, quality control processes, and logistical readiness to fulfill the order without delay, as the products are intended for direct use in TDCJ operations. Submissions are due by August 7, 2026, and the contract is classified as a subcontract under NAICS code 326199 for other plastic product manufacturing. The procurement is administered through the Texas SmartBuy platform, and while the place of performance and agency office address are unspecified, all delivered crates must be positioned for immediate receipt at designated TDCJ locations. There is no set-aside designation, meaning the opportunity is open to all qualified vendors regardless of business size or category. The solicitation is non-negotiable in its technical requirements and places full responsibility on the supplier for compliance, timely delivery, and adherence to state facility specifications.

Texas Department of Criminal Justice

POSTED

DEADLINE

Source for Qualified Raw Materials or ComponentsThe contract requires the supply of traceable, certified raw materials or subcomponents that conform to QPL-AS23190-QPD standards for use in final products, ensuring full compliance with military specifications. Any substitution of approved materials or components is strictly prohibited without formal deviation approval, emphasizing rigorous quality control and supply chain integrity. Materials must be sourced from verified suppliers and documented to maintain auditability and traceability throughout the lifecycle of the product. This subcontract, issued under NAICS code 326199 by the Department of Defense’s LAND SUPPLIER OPERATIONS SMSG, is open for responses until August 25, 2026, with postings beginning July 24, 2026. The performance location and point of contact details are not specified, but all deliveries must meet the stringent compliance criteria outlined in the QPL-AS23190-QPD qualification list. The requirement underscores the Department of Defense’s need for reliable, documented, and approved components to support mission-critical applications, with no tolerance for unapproved alternatives.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Precision Composite Ring ManufacturingThe contract requires the manufacture of 67 composite wearing rings to exact military drawing specifications, encompassing all phases from precision molding and curing to rigorous inspection and secure packaging. Each unit must meet stringent quality standards consistent with Department of Defense requirements, ensuring structural integrity and operational reliability under demanding conditions. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with delivery and compliance deadlines strictly tied to the contract timeline. This is a subcontract opportunity under the NAICS code 326199 for other plastic product manufacturing, sourced through the Maritime Supply Chain organization within the Department of Defense. Bidders must submit their proposals by the deadline of July 29, 2026, with no set-aside provisions specified. The solicitation is publicly accessible via the DIBBS portal, and contractors are expected to adhere fully to military drawing standards without deviation, ensuring traceability, documentation, and conformity throughout the production cycle.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Composite Ring ManufacturingThe contract involves the manufacture of 83 wearing rings from government-approved composite materials, strictly following technical drawing RQ002, with full compliance to configuration control standards and approved source listings. All components must be produced using materials and processes that meet the stringent requirements set by the Department of Defense to ensure consistency, traceability, and performance under operational conditions. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with zip code 17070-5002, and delivered under the terms of a subcontract awarded under NAICS code 326199, which covers other plastics product manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential subcontractors to submit proposals. The contract is administered by the Maritime Supply Chain under the Department of Defense, emphasizing its critical role in defense-related logistics and equipment support. While no point of contact or set-aside details are provided, the requirement to adhere to approved materials and configuration control implies a high degree of oversight, quality assurance, and documentation throughout the manufacturing and delivery process. Interested parties must respond via the designated DIBBS portal before the deadline to be considered.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Reflective Tape (White and Silver)The contract calls for the procurement or manufacturing of 224 rolls of pressure-sensitive reflective tape in white and silver, each roll measuring 1,800 inches in length and 6 inches in width, with strict compliance to military or commercial specifications. The supplier is responsible for all aspects of fulfillment including proper packaging, accurate labeling, and timely delivery to the designated DLA warehouse located in Tracy, California, with a ZIP code of 95304-5000. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the SBA under FAR 19.5, and the NAICS code 326199 applies to this classification. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Svc I office.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract seeks the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials sourced exclusively from suppliers listed on the QPL-81705. These materials are critical for safeguarding sensitive electronic components during handling, storage, and transportation within defense logistics environments. All offerings must adhere strictly to the performance and qualification standards mandated by the military specification to ensure compatibility and reliability in mission-critical applications. This is a subcontract classified as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to compete, in alignment with FAR 19.5. The NAICS code 326199 designates the industry as other plastic product manufacturing, indicating the nature of the materials involved. The contract was posted on July 24, 2026, with responses due by August 9, 2026. Performance is required at Robins Air Force Base, Georgia, 31098-1887, under the auspices of the Maritime Supply Chain within the Department of Defense. All potential bidders must ensure compliance with the specified technical requirements and eligibility criteria to be considered for award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Commercial Flooring Supply and DeliveryThe contract seeks the supply and delivery of commercial-grade, non-slip safety flooring designated as ALTRO AZURE Roll, specifically engineered to meet manufacturer specifications and approved for use in high-traffic transit and public facilities. The flooring must comply with stringent performance standards for durability, slip resistance, and long-term safety in environments exposed to heavy foot traffic and potential moisture. Delivery is expected to meet all contractual requirements regarding product quality, packaging, and shipping timelines to ensure seamless installation upon arrival. This subcontract opportunity, posted on July 24, 2026, with a response deadline of July 31, 2026, is issued by Dallas Area Rapid Transit under NAICS code 326199, which pertains to other rubber product manufacturing. The place of performance is in Texas, though exact delivery coordinates are unspecified, and bids must be submitted through the designated portal at the provided link. All vendors are expected to demonstrate proven experience with similar commercial flooring products and provide assurance that the supplied material will meet the mandated safety and compliance criteria for public transit environments.

Dallas Area Rapid Transit

POSTED

DEADLINE

Composite Panel Manufacturing & FabricationThe contract calls for the manufacture and fabrication of 100 custom composite course panels in full compliance with detailed technical specifications, encompassing all stages from layup and molding through curing, finishing, and the application of IUID marking standards. This work must be executed under stringent quality controls to ensure dimensional accuracy, material integrity, and regulatory compliance throughout production. The panels are intended for use in defense-related applications, requiring adherence to military-grade standards and traceability protocols. This is a Small Business Set-Aside subcontract under NAICS code 326199, exclusively available to qualified small businesses as defined by the SBA. It was posted on July 24, 2026, with responses due by 6:00 PM ET on July 30, 2026. Performance is to take place in Pensacola, Florida, 32508, under the purview of the Department of Defense through the agency designation FA3020 82 Cons Lgc. The contract is part of a broader procurement effort to support national defense infrastructure, with participation limited to small businesses meeting SBA eligibility criteria.

POSTED

DEADLINE

Hermetically Sealed Zinc Coffins and Transit Packaging SupplyThe contract requires the supply of hermetically sealed zinc inner coffins compliant with U.S. Army Regulation 638-2, designed for the international transport of human remains. Each coffin must feature airtight, hermetic sealing to ensure sanitary and dignified handling during transit, and must be paired with approved, standardized transit packaging that meets international shipping regulations for human remains. The products must be manufactured and packaged to withstand long-distance international shipment, including environmental variables and handling procedures typical in global military and civilian repatriation logistics. The solicitation is issued as a subcontract under the Department of Defense, specifically by W40M MRC0 West, with performance localized to Landstuhl, Germany, a key hub for U.S. military medical and logistical operations. The NAICS code 326199 indicates this falls under other plastic product manufacturing, suggesting specialized production of high-integrity zinc containers. The response deadline is August 6, 2026, and all submissions must demonstrate full adherence to regulatory standards, quality control protocols, and packaging certification requirements for international repatriation, without deviation from Army compliance specifications.

W40M MRC0 West

POSTED

2 days ago

DEADLINE

in 11 days

General Info

Agency

Department Of Homeland Security → 13TH Coast Guard District OfficeView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

Ilwaco, WA, 98624, USA

Set-Aside

SBA

Documents

(5)

SF18-shrink+wrap.pdf

PDF

SOW+for+Shink-wrap.pdf

PDF

SF-18+PG2.pdf

PDF

Service-Clauses.pdf

PDF

WageDetermination.txt

TXT

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedNov 22

Combined Synopsis

Response DeadlineNov 24

Deadline has passed

Submission Closed

11/24/2022, 02:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → 13TH Coast Guard District Office

Contacts1 person available

OfficeSEATTLE, WA, 98174, USA

Organization / Agency

Department Of Homeland Security → 13TH Coast Guard District Office

View Agency Profile

Office AddressSEATTLE, WA, 98174, USA

Contacts

Anthony Sofo

contact@example.gov

+1 (555) 000-0000

Full Description

DESCRIPTION: The U.S. Coast Guard intends to procure shrink wrapping services for four vessels for outdoor storage at U.S. Coast Guard Motor Lifeboat School in Ilwaco, WA. This notice is a combined synopsis/solicitation for a commercial item in accordance with Federal Acquisition Regulation Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes a public solicitation. Please read this entire notice, the instructions herein, and the attachment documents carefully. This acquisition is on a Small Business Set-Aside only. HOW TO RESPOND: To compete for this project, interested parties must be registered in SAM (System for Award Management) prior to close of this solicitation. https://www.sam.gov/portal/public/SAM/. The vendors SAM registration must be in an - ACTIVE status prior to award. Vendors must ensure that the above listed NAICS codes are listed on their SAM registration to perform this type of service. COST PROPOSALS: The contract will be awarded using simplified acquisition procedures in accordance with FAR part 13 and part 15 provide Firm Fixed-Price - broken out by labor hours, labor category, materials, and other direct costs. Offerors must submit the proposal to Cristina Mesen email cristina.p.mesen@uscg.mil. EVALUATION CRITERIA: The government will award a contract resulting from this request for quote (RFQ) to the responsible offeror whose offer conforming to the RFQ is the Lowest price Technically Acceptable (LPTA) quote. The lowest priced quote will be evaluated on technical acceptability, if it is found to be acceptable, an award will be made. If it is found to be unacceptable, the next lowest price will be evaluated. This process will continue until a technically acceptable offer is identified. INQUIRIES: Telephone inquiries as described in the Statement of Work.