Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHROUD SEGMENT, TURB

Active
SPE4A5-26-T-397ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of two turbine shroud segments, identified as critical application items with part number 5200T08G10 and NSN 2840016917442. The order is issued by the Department of Defense through the ASC Supplier OEM Division for delivery to the Fleet Readiness Center East in Cherry Point, North Carolina. Delivery is required within five days after receipt of the order, with a required delivery date of August 25, 2026. The agreement mandates strict adherence to various technical and quality requirements, including CMMC Level 2 self-assessment, DLA packaging standards, and specific sampling methods such as MIL-STD-1916 or ASQ H1331. It specifies that the items are commercial in nature and requires marking in accordance with MIL-STD-129. Shipping must be handled via the fastest traceable means, specifically prohibiting the use of parcel post.

General Info

DoD procurement of two turbine shroud segments for delivery by August 25, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

MCAS, CHERRY POINT, NC, 28533-0021, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-397Z Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Kirstie Ragsdale
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHROUD SEGMENT,TURB
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
SHROUD SEGMENT, TURB
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SPE4A5-26-T-397Z
SECTION B
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CRITICAL APPLICATION ITEM
GENERAL ELECTRIC COMPANY 99207 P/N 5200T08G10
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018016320 0001 EA 2.000
NSN/MATERIAL:2840016917442
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65923
FLEET READINESS CENTER EAST
PSC 8021
MCAS
CHERRY POINT NC 28533-0021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65923
DLA/FLEET READINESS CENTER EAST
SPE4A5-26-T-397Z
SECTION B
PR: 7018016320 PRLI: 0001 CONT’D
BLDG 148 BAY C
BEACHEY ROAD
CHERRY POINT NC 28533-5040
US
M/F: (TCN) N659236232A425
RDD: 232
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 24 FC: PC
Need Ship Date:00/00/0000 Original Required Delivery Date:08/25/2026
SPE4A5-26-T-397Z NSN/Part Number: 2840-01-691-7442 Quantity: 2 EA Purchase Request: 7018016320QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
DAMPER, TURBINE BLAD
Solicitation # SPE4A1-26-T-2715
Solicitation SPE4A1-26-T-2715 is a federal request from the Department of Defense Aviation Supply Chain for 11 turbine blade dampers, identified by NSN 2840-01-734-0890. The delivery requirement is 192 days after receipt of order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. Additionally, bidders must certify they will not provide covered telecommunications equipment and are prohibited from using additive manufacturing unless specifically authorized. Administrative requirements include selecting other equivalent for dealer certifications and utilizing DIBBS for quotes, including no bid submissions if a later quote is anticipated. Small business joint ventures must provide specific representations under FAR 52.212-3 and 52.219-1. Furthermore, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access to ensure continued shipping capabilities to the DLA.
AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
TUBE AND HOSE ASSEM
Solicitation # SPE4A6-26-T-24YL
This contract is for the procurement of three tube and hose assemblies under solicitation SPE4A6-26-T-24YL for the Department of Defense. The items are identified by NSN 2835-00-602-7940 and are designated as critical application items. Approved sources include General Electric Company, Air-Pro LLC, Smiths Tubular Systems-Laconia Inc., and Parker-Hannifin Corporation. Delivery is required within five days after receipt of order, with shipping designated as FOB Origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA technical and quality requirements, including specific standards for measuring and test equipment, packaging, and documentation. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging, except for specific functional exceptions. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
FIXTURE, TRANSFER
Solicitation # SPE4A6-26-T-19FG
This solicitation, identified as SPE4A6-26-T-19FG, is issued by the Department of Defense ASC Commodities Division for the procurement of two transfer fixtures under NSN 2835-01-078-2084. The contract is a total small business set-aside under NAICS code 333611. Delivery is required within 171 days after order, with a need ship date of February 14, 2027, and an original required delivery date of May 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the destination. The procurement is subject to strict quality and technical requirements, including DLA packaging requirements RP001 and tailored higher level quality requirements RQ001. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and the use of mercury or mercury-containing compounds is prohibited except where functionally required. Item Unique Identification is not required for this order. Approved sources include General Electric Company, Rhinestahl Corporation, and Lincoln Electric Automation Inc. Technical data for this NSN is currently proprietary or insufficient for competitive procurement.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 333611
New
DIBBS
BLADING SET, TURBINE
Solicitation # SPE7L1-26-T-971M
Solicitation SPE7L1-26-T-971M is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of one turbine blading set, identified as a critical application item under NSN 2825009618340. The requirement specifically calls for Siemens Energy, Inc. part numbers 410-0523, F5831PC4, and F5831PT4. This procurement is designated as a total small business set-aside under FAR 52.219-6. The original required delivery date is August 13, 2026, with a delivery lead time of five days after order. The items are to be delivered FOB Origin to Soto Cano Air Base in Comayagua, Honduras, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, specifically RA001, and packaging standards RP001 and ASTM D3951, with all shipments labeled according to MIL-STD-129. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by August 27, 2026.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333611
New
Federal
28--BLADE,TURBINE ENGIN, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QUC28
This presolicitation, issued by the Navsup Weapon Systems Support Mech under solicitation number N0010426QUC28, is for the repair or modification of 72 turbine engine blades identified by NSN 7H-2835-014578177. Delivery is specified as FOB Origin. The government does not possess the data rights for this part and has determined that purchasing such rights or reverse engineering the component is uneconomical. Technical specifications and standards may be obtained through the DoD Single Stock Point or the ASSIST-Online portal, though specific patterns and drawings are not stocked there. Award eligibility requires that the offeror, manufacturer, or product meets all qualification requirements per FAR clause 52.209-1 at the time of award. While the government is not currently utilizing FAR Part 12 for commercial item acquisition, interested parties may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice. Responses are due by September 28, 2026, and inquiries should be directed to Leigh E. Catchings.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333611
New
SLED
Skid-Mount Mobile Diesel Generator Supply
Cherokee Nation

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333611
New
DIBBS
NOZZLE ASSEMBLY CON
Solicitation # SPE4A5-26-T-377G
This contract is for the procurement of eight containment nozzle assemblies, identified as commercial critical application items with part number 364967-4 from Honeywell International Inc. The agreement specifies a delivery timeline of 169 days after order, with a required delivery date of February 8, 2028, and shipping destined for the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 self-assessment and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA procurement requirements. Inspection and acceptance will occur at the destination, and the contract prohibits any quantity variance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 333611
New
DIBBS
RUNNER-SEAL, GEARSHA
Solicitation # SPE4A1-26-T-2701
This contract is for the procurement of four units of a runner seal gearshaft assembly, identified as part number 3021665 by Pratt & Whitney Canada Corp and NSN 2840002423485. The item is designated as a critical application item. Delivery is required within 162 days, with a need ship date of February 14, 2027, and a final required delivery date of December 11, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additional compliance is required for configuration change management, source approval requests, and the removal of government identification from non-accepted supplies.
AVIATION SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
DUCT, EXHAUST, NONAIR
Solicitation # SPE4A6-26-T-20PC
This solicitation, identified as SPE4A6-26-T-20PC and issued by the Department of Defense ASC Commodities Division, is for the procurement of one non-aircraft gas turbine engine exhaust duct, part number 2835-01-480-9657. The requirement specifies a delivery timeline of 10 days after receipt of order, with the place of performance located at Fort Stewart. The acquisition is subject to strict quality and technical standards, including DLA packaging requirements, physical identification and bare item marking, and specific sampling methods aligned with MIL-STD-1916 or ASQ H1331. The contract mandates high security and compliance standards, requiring CMMC Level 2 certification from a Third-Party Assessment Organization. Additionally, the item contains technical data subject to ITAR or EAR export controls, restricting disclosure to authorized persons and requiring contractors to have an approved US/Canada Joint Certification Program certification. Offerors must adhere to the DLA Master List of Technical and Quality Requirements and submit quotations via the DIBBS system by the specified deadline.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333611
New
Federal
Mobile Generator Unit Procurement (OEM or Distributor)
Base KODIAK(00045)

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
Federal
High Speed Gear Supply
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333611
New
Federal
Supply of Marine Diesel Generator Sets (Gensets)
Supply Of Shipbuilding Groton

POSTED

3 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A5-26-T-358E
This solicitation from the Department of Defense ASC Supplier OEM Division is for the procurement of three retaining rings, identified by part number 96110 from Honeywell International Inc and NSN 5325-01-563-1340. The contract requires delivery within 171 days after receipt of the order, with performance taking place at Tinker AFB. Key compliance requirements include a CMMC Level 2 self-assessment and specific physical identification marking for the bare items. Due to previous reports of shipping damage, the contractor must provide enhanced protection by using domestic fiberboard as a stiffener on both sides of the procedure indicator.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336412
New
DIBBS
BODY, FUEL CONTROL FRON
Solicitation # SPE4A5-26-T-397C
This contract is for the procurement of one unit of a front fuel control body, identified as a critical application commercial item with NSN 2915-00-673-4955 and part number 334085. The order is managed by the Department of Defense under solicitation SPE4A5-26-T-397C, with a required delivery date of September 2, 2026, and a delivery window of 20 days after the order is placed. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. The supplier must adhere to strict quality and security standards, including CMMC Level 2 self-assessment and the handling of covered defense information. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Item Unique Identification is not required for this specific request.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
THERMOWELL
Solicitation # SPE4A5-26-T-396H
This contract is for the procurement of one thermowell, identified by NSN 6685-01-432-2576 and part number W3M1. The order is issued by the Department of Defense under solicitation SPE4A5-26-T-396H, with a required delivery date of August 24, 2026, and a delivery window of 20 days after the order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the Southeast Regional Maintenance Center at Naval Station Mayport, Florida. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and RP001. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326130
New
DIBBS
PLASTIC SHEET, ADHES
Solicitation # SPE4A5-26-T-396J
This contract is for the procurement of seven rolls of adhesive coated plastic sheets, with each roll measuring 60 feet. The items are identified as commercial products and must adhere to specific storage conditions, requiring a temperature of 70 degrees and relative humidity no higher than 50 percent to maintain a 12 month shelf life. Delivery is required within 20 days after the order is placed. The agreement incorporates several technical and quality requirements, including physical identification marking, source approval documentation, and specific DLA packaging standards. Quality assurance is governed by strict sampling methods such as MIL-STD-1916 or ASQ H1331, with a general requirement for zero non-conformances in sample lots. Inspection and acceptance will occur at the origin, and any alternate offerors must provide a complete data package for approved and alternate parts.
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334512
New
DIBBS
THERMOSTAT, FLOW CON
Solicitation # SPE4A5-26-T-396K
This contract is for the procurement of one flow control thermostat, identified as a commercial off the shelf item with NSN 6685991485092 and part number 320/04618 for J.C. Bamford Excavators Limited. The order is managed under solicitation number SPE4A5-26-T-396K with a required delivery date of August 24, 2026, and a delivery timeframe of 10 days after order. Shipping is FOB origin and destined for the 0704 CS BN Brigade Support at Fort Carson, Colorado. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging must comply with RP001 and MIL-STD-129, with specific instructions for hazardous or non-hazardous materials according to FED-STD-313 and ASTM D3951. Item Unique Identification is not required for this specific order.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
METER, FLUID FLOW INDIC
Solicitation # SPE4A5-26-T-398F
This contract is for the procurement of five differential fluid flow indicating meters, identified by NSN 6680-01-451-8144 and associated with Cameron Energy Services Corp part number 20HCXXX0X60A5ABAXX02. The order is issued by the Department of Defense under solicitation SPE4A5-26-T-398F as a total small business set-aside. Delivery is required within five days after the order, with a required delivery date of September 2, 2026. The items are to be delivered FOB Origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The contract mandates strict adherence to DLA packaging requirements RP001 and MIL-STD-2073-1E, including specific marking for delicate instruments per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. While item unique identification is not required by the customer, the contractor must follow guidelines for the removal of government identification from non-accepted supplies and ensure compliance with covered defense information regulations.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
STRIKE, CATCH
Solicitation # SPE4A5-26-T-396M
This contract is for the procurement of three units of a strike catch, identified as NSN 5340-01-697-2174 and Boeing part number F56710C4-1LDL. The item is designated as a critical application item and requires a Certificate of Airworthiness and Conformance for FAA certified parts. Delivery is set for 537 days after order, with a required delivery date of February 28, 2028, shipping FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and specific FAA airworthiness approvals. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331 standards. Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
MESSENGER ASSEMBLY
Solicitation # SPE4A5-26-T-397L
This solicitation, identified as SPE4A5-26-T-397L, is for the procurement of four messenger assemblies under NSN 4010-01-225-9838. The contract is a total small business set-aside issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 156 days after receipt of the order, and the place of performance is located in New Cumberland, Pennsylvania. The procurement is subject to strict regulatory requirements, including CMMC Level 2 certification and adherence to DLA packaging and physical identification standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA training to access the data. Additionally, the contract requires a Certificate of Quality Compliance and adherence to the DLA Master List of Technical and Quality Requirements.
Spring Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
METER, AIR VELOCITY
Solicitation # SPE4A5-26-T-398B
This contract is for the procurement of 46 air velocity meters, identified as NSN 6680-01-342-9904 and part number 901-7310-2. The items are classified as commercial critical application items with no shelf life requirements. The order is a total small business set-aside under NAICS code 334519, with delivery required within 156 days. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the origin, and sampling must follow MIL-STD-1916 or ASQ H1331. The final destination for the shipment is DLA Distribution Warner Robins in Georgia, with a required need date of February 12, 2027.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
SENSOR FLUID QUAL
Solicitation # SPE4A5-26-T-396R
This contract, identified as SPE4A5-26-T-396R, is a solicitation for the procurement of 13 units of sensor fluid, identified by NSN 6680-01-662-1744 and Cummins Inc. part number 2897589. The item is classified as a Commercial Off The Shelf product. Delivery is required within 63 days, with a required delivery date of August 28, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will take place at the destination.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333618
New
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-397G
This contract is for the procurement of four oil pressure indicators, identified by NSN 6620000054879 and part number 12845 from Faria Beede Instruments, Inc. The items must conform to basic drawing 30554 69-576 Revision K. Delivery is required within 158 days, with a required delivery date of November 14, 2026, and a need ship date of February 14, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, and packaging, except where functionally required for specific instruments. Item Unique Identification is not required for this order.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333310
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-396U
This contract is for the procurement of 13 dial indicating pressure gages, specifically Ashcroft Inc part number 60-1082AS02L30, under NSN 6685008780473. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of January 28, 2027. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. A key restriction is the prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging, except where functionally required. Quality assurance will be conducted at the destination using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details