This Government Contract opportunity from South Carolina was posted on June 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sign Fabrication and Material Supply

Closed

State & Local

Submission Closed06/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339950

New

SLED

Aluminum Sign Blanks - Traffic Engineering

Solicitation # 369

The Jefferson Parish Government is soliciting bids for the purchase of aluminum composite panels to be used as permanent signal back plates for the Traffic Engineering Department. These panels must be constructed from two aluminum skins of at least .010 inch thickness, using Aluminum Alloy 5052 H32, bonded to a carbon black pigmented polyethylene core with a total thickness of 2mm. To meet MUTCD standards, both sides must feature a dull black fluoropolymer coating. The material must be durable enough to withstand temperatures ranging from -60 to 170 degrees Fahrenheit and have an expected lifespan of 12 years. Technical compliance is critical for award, requiring documented wind testing by an independent agency showing resistance to sustained velocities of 80 mph and gusts up to 108 mph. Suppliers may be required to provide non-returnable samples at no cost, evidence of ISO 9001:2000 certification for manufacturing facilities, and confirmation from reflective sheeting manufacturers that the material is a suitable substrate. Additionally, the selected supplier must provide a warranty against defects and workmanship, as well as personal factory support and training within 24 hours for fabrication and application matters. Packaging must adhere to industry standards, utilizing 4-way skids or reinforced wooden boxes for signal back plates.

Jefferson Parish Government

POSTED

DEADLINE

Solicitation # SPE8E6-27-Q-5002

Solicitation SPE8E6-27-Q-5002 is a small business set-aside request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 65 decals, identified by NSN 7690-01-693-3089. This is a firm fixed price acquisition with a delivery requirement of 90 days after order, though the customer requested delivery date is April 22, 2027. The items are designated as critical application items and must adhere to specific technical standards, including Basic Drawing NR 14153 RE-016933089 and various Quality Assurance Provisions. Inspection and acceptance will occur at the destination, with final delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must comply with stringent packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside FAA bare item marking requirements. Additional quality mandates include supply chain traceability documentation and airworthiness approval. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates comprehensive FAR and DFARS clauses covering cybersecurity, safeguarding covered defense information, and prohibitions on certain foreign telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System.

POSTED

DEADLINE

Vehicle Decal Manufacturing

W7M1 Uspfo Activity Dc Arng

POSTED

DEADLINE

Vehicle Decals and Installation Services

Solicitation # W912R127QA004

The D.C. Army National Guard is conducting market research through a sources sought notice to identify potential vendors for the manufacture and installation of reflective vehicle decals on approximately sixty government vehicles. The project requires the use of white, automotive-grade retroreflective vinyl that adheres to government-provided designs, covering at least 60 percent of the roof, sides, front, and rear of each vehicle. Each vehicle must feature a unique identification number ranging from DC-01 to DC-60, with customizations made for various makes and models while maintaining approved proportions. The preferred installation site is Joint Base Anacostia-Bowling in Washington, D.C., with a desired completion pace of at least five vehicles every seven calendar days. This notice is for informational purposes and does not constitute a formal solicitation or commitment to award a contract. Interested parties, including small businesses under NAICS 339950, must submit an Interested Vendor Form and a narrative statement of no more than one page to the primary point of contact, Major Amanda Britton, by November 10, 2026.

W7M1 Uspfo Activity Dc Arng

POSTED

DEADLINE

Piney Woods Region, Lake O the Pines Park Signs

Solicitation # W9126G27QA002

Solicitation W9126G27QA002 is a firm-fixed-price, total small business set-aside procurement for 187 custom aluminum signs to be used at offices, boat ramps, and campgrounds within the USACE Piney Woods Region at Lake O the Pines, Texas. All signage must be fabricated in strict accordance with the USACE Sign Program Manual and Engineer Pamphlets EP 310-1-6, EP 310-1-6a, and EP 310-1-6b. The contractor is required to submit artwork, color samples, and graphic proofs for government approval prior to fabrication. Delivery is designated as FOB Destination to Jefferson, Texas, with an estimated delivery window of 30 to 45 business days following the approval of artwork and color matches. The government will evaluate offers based on price and a technical submission rated on a go/no-go basis to ensure all product specifications are met. Award will be granted to the responsible offeror providing the best value to the government. Key administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and maintaining an active registration in the System for Award Management. Recent amendments have refined the product specifications and price schedule, incorporated vendor question responses, and removed DFARS clause 252.226-7002.

POSTED

DEADLINE

Monument Sign Design and ConstructionThis subcontract for Monument Sign Design and Construction involves providing comprehensive signage services for prime contractors working on municipal projects for the City of Atascadero. The scope of work encompasses the entire production lifecycle, including graphic design, the fabrication of signs using acrylic or metal materials, and final on-site installation. All deliverables must strictly adhere to the specific design guidelines and signage ordinances established by the City of Atascadero. The project is categorized under NAICS code 339950 and will be performed within Atascadero, California. Interested parties must note that the response deadline for this opportunity is November 19, 2026. The primary objective is the successful delivery and installation of both project-specific signage and permanent monument signs.

POSTED

DEADLINE

Custom Signage and Accent Lighting InstallationThis subcontract for Custom Signage and Accent Lighting Installation involves the fabrication and installation of new commercial signage and accent lighting for facade improvement projects within the City of Victorville. The selected contractor is responsible for producing sign panels and plaster accents according to specific plan page A-3.0, installing the lighting fixtures, and ensuring the final delivery of a fully functioning system. Additionally, the contractor must manage and obtain all necessary permits from the City of Victorville. To be eligible for this project, contractors must hold a valid CSLB License. The opportunity was posted on November 4, 2026, with a response deadline of December 9, 2026. This project is managed under the City Manager's Office in California and falls under NAICS code 339950.

City Manager's Office

POSTED

DEADLINE

Large Format and Rigid Signage ProductionThis subcontract opportunity for Large Format and Rigid Signage Production involves the supply and production of physical advertising materials for prime contractors working on City of Havre de Grace projects. The selected provider will be responsible for printing and delivering corrugated plastic signs, vinyl banners with grommets, and plastic sandwich boards utilizing large format printers and vinyl cutters. Interested parties must possess a Maryland Certificate of Good Standing to be eligible for the contract. The solicitation was posted on November 3, 2026, with a response deadline set for November 25, 2026. This procurement falls under NAICS code 339950 and is managed through the City of Havre de Grace in Maryland.

City of Havre de Grace

POSTED

DEADLINE

Barataria Park Sign - Parkways

Solicitation # 327

The Jefferson Parish Government is soliciting bids for the provision and installation of one single-sided high density urethane decorative sign located within the northern right-of-way of Bald Eagle Park in Marrero, Louisiana. The scope of work encompasses all necessary labor, materials, and equipment, including the installation of a 3,000 PSI concrete footer and Side 40 mounting posts. The selected vendor must provide sign submittals for approval by the Jefferson Parish Parkways Department prior to fabrication and is responsible for returning the site to its original condition upon completion. The contract excludes electrical work, landscape installation, and permit requirements. The contract will be awarded to the lowest responsive and responsible bidder. Mandatory requirements include strict adherence to standard insurance coverages, specifically Worker's Compensation, Commercial General Liability, and Business Automobile Liability, in accordance with Jefferson Parish Resolutions 136353 or 141125. The apparent low bidder must provide final insurance certificates within ten calendar days of the bid opening to avoid being deemed non-responsive. Work may only commence upon receipt of a written Notice to Proceed or Purchase Order and must be performed on non-holiday weekdays between 8:00 am and 4:00 pm. A one-year warranty on materials and workmanship is required following final acceptance and inspection by the Parkways Department.

Jefferson Parish Government

POSTED

DEADLINE

Interior Reception Sign (Fabrication, Delivery, & Installati

Solicitation # SRC0000037536

The Alabama Board of Nursing is soliciting competitive bids for the design, fabrication, delivery, and installation of one professional, non-illuminated interior wall-mounted reception sign for its Birmingham/Hoover satellite office. The sign must feature the ABN logo, with or without the text Alabama Board of Nursing, and should have a contemporary brushed aluminum or brushed stainless-steel appearance. Estimated dimensions are 30 to 36 inches wide by 10 to 12 inches tall with a 1/4-inch thickness, though bidders may propose proportionate dimensions for the 9-foot-wide wall. The selected supplier must provide digital design proofs for approval and ensure a secure installation using concealed stud mounting or standoffs, followed by the removal of all construction debris. The contract will be awarded to the lowest responsive and responsible bidder providing a single, all-inclusive fixed lump-sum price. Bidders must submit all documentation electronically through the Alabama Buys Portal by November 10, 2026. Key requirements include E-Verify enrollment for Alabama employers, certification of tax registration, and adherence to the Beason-Hammon Alabama Taxpayer and Citizen Protection Act. The resulting agreement may be renewed annually for up to five years with a total contract value not to exceed 25,000 dollars. Legal venue for any disputes is set in the City of Montgomery, Alabama, and the contract is subject to non-appropriation of funds clauses.

Alabama Board of Nursing

POSTED

DEADLINE

FY27 Traffic Sign Materials

Solicitation # TO27-05

The Ada County Highway District (ACHD) is soliciting competitive bids under solicitation TO27-05 for the procurement of traffic signs, sign blanks, signposts, and anchor bases. The contract is a purchase agreement with a performance period starting upon execution and continuing through September 30, 2027. All materials must adhere to ACHD specifications, standard drawings, and Manual on Uniform Traffic Control Devices (MUTCD) requirements. Specific technical standards include the use of .080-inch or .100-inch-thick aluminum for signs, Type IV or higher retro-reflective sheeting, and steel posts conforming to ASTM A-446 and ASTM A-525 (G-90) for galvanization. Deliveries are set as F.O.B. Boise, with the vendor assuming all expense and risk for transport to the ACHD principal place of business. Bids must be submitted electronically via the ACHD eProcurement portal by November 18, 2026, at 3:00 pm local time; manual or paper submissions will be deemed non-responsive. Required documentation includes a completed Vendor Questionnaire, Bid Schedule, and a Buy American Certificate. Evaluation is based on strict compliance with specifications and responsiveness to the bid documents. Awardees may be required to provide bid security of 10% of the total bid and performance and payment bonds equal to 100% of the contract value. Additionally, vendors must maintain comprehensive general liability and motor vehicle insurance with minimum limits of $100,000 per claim and $500,000 aggregate. Payment terms are net 30 days following invoice submission to the designated ACHD email.

POSTED

DEADLINE

Event Staging and Custom Signage SupplyThis subcontract for Christopher Newport University in Newport News, Virginia, involves the supply and installation of white stage flooring and custom printed event signage for prime contractors. The scope of work specifically includes the installation of white stage decking and the production of one 2'x20' custom sign based on provided print-ready artwork. To qualify for the project, the contractor must provide a Certificate of Insurance and pass National criminal history background checks. The final deliverables consist of the fully installed stage and the mounted custom signage.

Christopher Newport University

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract involves the manufacture and supply of signage components using aluminum, acrylic, and protective coatings that meet AAMA 2603 and ASTM standards, ensuring durability and compliance with industry specifications for outdoor environmental exposure. The work is designated as a subcontract under NAICS code 339950, which covers other miscellaneous manufacturing, and is issued by the Colleton County School District in South Carolina. All materials and finishes must adhere strictly to the referenced standards to guarantee longevity, color retention, and resistance to weathering, UV degradation, and chemical exposure. The solicitation was posted on June 9, 2026, with a response deadline of June 23, 2026, at 7:00 PM Eastern Time. The place of performance and specific delivery locations are not detailed in the provided data, but the components are intended for use by the school district, likely for campus-wide signage systems. While no set-aside provisions or point of contact information is included, bidders must ensure full compliance with technical requirements, submission deadlines, and quality assurance protocols to be considered for award. The contract is accessible via the South Carolina State Procurement portal for further details and submission guidelines.

General Info

Manufacture and supply aluminum, acrylic signage meeting AAMA 2603 and ASTM standards for Colleton County School District.

Agency

South Carolina → Colleton County School District

NAICS

339950 - Sign Manufacturing

Place of Performance

SC, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 9

subcontract

Response DeadlineJun 23

Deadline has passed

Submission Closed

06/23/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencySouth Carolina → Colleton County School District

ContactsNo contacts available

OfficeN/A

Organization / Agency

South Carolina → Colleton County School District

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of signage components using aluminum, acrylic, and protective coatings compliant with AAMA 2603 and ASTM standards.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS