This Government Contract opportunity from New Mexico was posted on October 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Signal and Lighting Installation

Closed

State & Local

Submission Closed10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210

New

SLED

Capital Project Number CP3453

Solicitation # 49693

The City of Lake Charles, Louisiana, is soliciting bids for Capital Project Number CP3453, focused on Lift Station Back-Up Power Improvements under the Hazard Mitigation Grant Program. The scope of work requires the installation of stand-by diesel generators and automatic transfer switches at designated lift stations. To ensure full execution, the project encompasses various civil, mechanical, structural, and electrical components. This solicitation, identified by number 49693, was posted on October 22, 2026, with a response deadline of November 17, 2026. The project is managed by the City of Lake Charles and will be performed within the state of Louisiana.

POSTED

DEADLINE

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is soliciting bids for contract FRSMP277009/JLM-Lighting Phase 2 under solicitation number WMATA-0000010972. This project falls under NAICS code 238210, which pertains to electrical contracting and related services. The solicitation was posted on November 4, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, to install emergency shut-off switches on power tools in Indiana. The scope of work specifically requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker in the Facility Engineering Storage/Maintenance Shop. All work must comply with FNC guidelines, current OSHA and EPA regulations, and applicable state and local codes, with Indiana regulations taking precedence if they are more stringent than federal laws. The procurement is a small business set-aside, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must submit a single lump sum proposal with a detailed cost breakdown for labor, materials, and equipment, along with a timeline for substantial completion. Evaluation is based on best value, with weights assigned to price (60), quality (20), past performance (10), and schedule (10). Required submission documents include a completed Vendor Questionnaire, W9, proof of a valid Indiana Contractor's License, and certification of compliance with Davis Bacon Act wage rates. Key administrative requirements include a mandatory site visit on November 10, 2026, and a response deadline of November 20, 2026. The selected contractor must maintain specific insurance coverages, including general liability of at least 1 million dollars per occurrence and automobile liability. Payment terms are Net 30. The contract includes a one-year workmanship guarantee starting from the date of substantial completion, and final payment is contingent upon the delivery of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors and suppliers.

Atterbury Job Corps. – Adams & Associates

POSTED

DEADLINE

NC Global TransPark Phase 2

Solicitation # nc-global-transpark-phase-2

Ace Electric is seeking WMBE subcontractors for the NC Global TransPark Phase 2 project in North Carolina. The scope of work involves the addition of an airplane hangar and three support buildings, specifically requiring expertise in fire alarms, data, and security under NAICS code 238210. The project is scheduled to commence in the spring of 2027 with an estimated duration of 15 months. Interested parties should coordinate with Thomas Jeffords or Chris Mitchell, noting that the response deadline for this solicitation is November 9, 2026.

POSTED

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformer assets. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections of energized transformers under load, installing standardized external oil sampling devices to improve technician safety, and performing comprehensive oil testing analysis. Additionally, the selected contractor will evaluate existing nitrogen blanket systems to ensure positive pressure and prevent oil oxidation, provide on-site training for up to 20 agency staff members, and develop standard operating procedures for the new sampling devices. All work must adhere to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards, with infrared inspections performed by ASNT Level 1 certified technicians or equivalent. The agency intends to make a single award based on the offeror's past performance, staffing plan, personnel availability, cost-effectiveness, and any exceptions taken to the contract terms. Qualified bidders must have completed at least two similar projects within the last five years, including at least one for a utility or industrial facility. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed project approach, company profile, and various required forms such as a non-collusion statement and workers compensation certificate. The resulting contract will utilize fixed pricing with a not-to-exceed total value, and payments will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

DEADLINE

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California for the Eastern Municipal Water District. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Bids must be submitted by 2:00 PM on November 18th, with a final deadline of November 19th, 2026. Quotes should be directed to lead estimator Ryan Falk. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements and all prime contract terms and conditions. Minimum insurance requirements include 1 million dollars for auto liability and workers compensation, 5 million dollars for excess liability, and general liability coverage of 1 million dollars per occurrence with 2 million dollars for aggregate and completed operations. Evaluation will be based on responsiveness to deadlines, insurance compliance, and SBE/DBE participation, including any lower-tier participation provided by non-certified firms.

POSTED

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves inspecting, testing, repairing, and certifying emergency lighting systems to ensure compliance with NFPA 101 (2024 Edition) and NFPA 70 standards. The selected electrical contractor will be responsible for inventorying all fixtures, performing functional power-cut testing, applying durable tracking labels to each fixture, and integrating recurring maintenance into the facility's Computerized Maintenance Management System. The estimated contract value ranges between $25,000 and $100,000, with a required performance period of 30 business days following the written Notice to Proceed. Bids are due by December 1, 2026, and will be awarded based on overall best value. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. For bids equal to or greater than $25,000, contractors must provide a bid bond guarantee of 20% of the base bid, as well as performance and payment bonds from a surety company with at least an A- rating. Submission requirements include the MTC Bid for Lump Sum Contract form and a detailed cost breakout on company letterhead. The contract is set aside for small businesses and various SBA-certified categories, and it mandates strict adherence to Federal Contractor Minimum Wage requirements and prevailing wage rates for building construction in Canyon and Gem Counties, Idaho.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This project represents a targeted effort to enhance aviation infrastructure at the Charleston facility through specialized technical installation.

POSTED

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of the construction is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and Kurtis Kinard serves as the primary point of contact for this requirement.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this effort is managed by Quentin Wack.

POSTED

DEADLINE

Solicitation # T0696-01

Solicitation T0696-01, issued by the New Jersey Division of Property Management and Construction, entails the replacement of generators at four NJDOT South locations: the Glassboro Maintenance Yard Office Building, Carneys Point SP Weigh Station, Cherry Hill Maintenance Yard Office Building, and Manahawkin Maintenance Yard Office Building. The project scope includes the demolition of existing equipment and site infrastructure, the installation of new electrical systems such as switchboards and panelboards, and comprehensive commissioning and testing. All electrical work must comply with NFPA 70 and the New Jersey Uniform Construction Code, with equipment requiring UL, FM, or ETL certification. The project duration is 210 calendar days, and the contractor must submit an approved schedule within 30 days of the Notice to Proceed. The contract will be awarded based on a single bid, separate bids by prime trade, or a combination thereof, with the state evaluating bidders on experience, past performance, and financial capability. Key requirements include the use of DPMC-prequalified firms for all testing and inspections, the presence of a factory-authorized service representative during system start-up, and the submission of monthly payment requests. The successful bidder must provide a performance bond for 100 percent of the contract price and comply with prevailing wage and equal employment opportunity regulations. Additionally, the apparent low bidder must submit certifications regarding non-debarment and prohibited activities in Iran, Russia, or Belarus prior to the award.

New Jersey Division of Property Management and Construction

POSTED

DEADLINE

(RFP) for Electrical Job Order Contracts (JOC 2716 and 2717) - Class C10 License

Solicitation # 20261103047

County of San Mateo

POSTED

about 4 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The Signal and Lighting Installation subcontract, issued by the New Mexico Department of Transportation, involves the installation of road lighting and traffic signal systems for prime contractors on bridge and highway construction projects. The scope of work includes the installation of signal and lighting service systems, detectors, and luminaires utilizing electrical conduit, lighting poles, and signal controllers. The contractor is responsible for ensuring full electrical code compliance to deliver fully functional road lighting and traffic signals. This project is located in Hidalgo and is categorized under NAICS code 238210.

General Info

NMDOT subcontract for installing road lighting and traffic signal systems in Hidalgo.

Agency

New Mexico Department of Transportation

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Hidalgo, NM, USA

Set-Aside

NONE

Documents

This scope was carved out of 1102070.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Call 002 1102070

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 16

subcontract

Response DeadlineOct 16

Deadline has passed

Submission Closed

10/16/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew Mexico Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew Mexico Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Installs road lighting and traffic signal systems for prime contractors on bridge and highway construction projects. Installs signal and lighting service systems, detectors, and luminaires using lighting poles, electrical conduit, and signal controllers. Ensures full electrical code compliance. Delivers functional road lighting and traffic signals.