Signal Conditioner Amplifier

This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. This is a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-53 and DFARs Change Notice (DCN) 20110916. NAICS is 335999 with a small business size standard of 500 employees. Solicitation is for commercial purchase of BRAND NAME OR EQUAL items. Goodrich Sensor Systems Signal Conditioner Amplifier, Model Number 0510GA1A4 MINIMUM SALIENT CHARACTERISTICS/SPECIFICATIONS: QTY: 3 SPECIFICATIONS: PRT Compatibility: - Ice point (R0) of 50, 100 or 500 ohms - Temperature coefficient (a) of .00385, .00390, .003915 or .003925 ?/?C PRT Leadwire Connections: - Three wire with 0.25? maximum leadwire resistance Accuracy: - Signal conditioner output will be within - 0.25% of Full Scale (FS) for all inputs. Accuracy is based on Root-Sum-Squared (RSS) summation of the following error components: - Long-Term Stability: 0.05% FS (maximum) - Repeatability: 0.1% FS (maximum) - Linearity: 0.15% FS (based on least-squares method) - Temperature Sensitivity: 0.002% FS/C (maximum) - Supply Sensitivity: 0.01% FS/volt (maximum) Momentary Power Interruption: Automatic recovery Signal Conditioner Temperature Range: Operating: -54'C to +71'C (-65'F to +160'F) Storage: -65'C to +125'C (-85'F to +257'F) Reliability: Mean Time Between Failure (MTBF) is greater then 100,000 hours (based on MIL-HDBK-217E). Maintainability: No scheduled maintenance. Signal conditioner can be repaired and recalibrated. ELECTRICAL SPECIFICATIONS: Input Voltage: 28 VDC (nominal) 22-32 VDC Power Requirements: 2 watts (maximum) Output Voltage: 0-5 VDC (nominal) Output Load: 5000 ohms (minimum) Output Isolation: 150K ohms (minimum) from the supply voltage Short Circuit Protection - No damage from continuously shorted output leads Reverse Polarity Protection - No damage from continuously reversed power leads Dielectric Strength: 100 VAC (rms) Insulated Resistance: 100 Megohms (min) at 100 VDC Weight: 7.2 ounces maximum ENVIRONMENTAL SPECIFICATIONS: Explosive Atmosphere: - Tested to MIL-STD-810, Method 511.1, Procedure I Temperature-Altitude: - Tested to MIL-STD-810, Method 504.1, Procedure I Humidity: - Tested to MIL-STD-810, Method 507.1, Procedure I Salt Fog: - Tested to MIL-STD-810, Method 509.1, Procedure I Fungus: - Meets MIL-STD-810, Method 508.1, Procedure I Dust: - Tested to MIL-STD-810, Method 510.1, Procedure I Shock: - 15g's, 11ms, half sine (Tested to MIL-STD-810, Method 516.2, Procedure I) Acoustic Noise: - 140 db for 30 minutes (Tested to MIL-STD-810, Method 515.2, Procedure I) Random Vibration: - Wo = .04 g2/Hz, 2 hours/axis operating (Tested to MIL-STD-810, Method 514.2) Items must be delivered to Edwards AFB, CA 93524. All delivery and pick-up charges must be included in the quote for FOB Destination. Interested parties who believe they can meet all the requirements for the items described in this synopsis are invited to submit in writing a complete quote including delivery FOB Destination Edwards AFB CA 93524. Offerors are required to submit with their quote enough information for the Government to evaluate the minimum requirements detailed in this synopsis. The following provisions and clauses apply: CONTRACTORS MUST COMPLY WITH FAR 52.204-7 CENTRAL CONTRACTOR REGISTRATION AND DFARS 252.204-7004 ALTERNATE A. INTERESTED CONTRACTORS CAN ACCESS THE CLAUSES BY INTERNET URL: http://farsite.hill.af.mil. TO REGISTER WITH THE CCR, GO TO URL: http://www.ccr.gov/. ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) MUST BE COMPLETED. USE OF ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) BECAME MANDATORY 1 JANUARY 2005. CONTRACTORS CAN ACCESS ORCA THROUGH CCR BY INTERNET URL: https://orca.bpn.gov/. The following FAR provisions and clauses apply to this acquisition: Provision 52.212-1, Instructions to Offerors--Commercial Clause 52.211-6, Brand Name or Equal Clause 52.212-2, Evaluation--Commercial Items; the following factor shall be used to evaluate offers: Lowest price technically acceptable to meeting all minimum requirements Clause 52.212-4, Contract Terms and Conditions--Commercial Items Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders--Commercial Items (to include: 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; 52.222-36, Affirmative Action for Handicapped Workers; 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era) Clause 52.232-33, Mandatory Information for Electronic Funds Transfer Payment The following DFARS clauses apply to this acquisition: Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items Clause 252.225-7001, Buy American Act and Balance of Payment Program The following AFFARS clauses apply to this acquisition: Clause 5352.223-9000, Elimination of Use of Class I Ozone Depleting Materials Clause 252.211-7003, Item Identification and Valuation Clause 252.232-7010, Levies on Contract Payments Clause 5352.201-910, Ombudsman Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 South Wolfe Avenue, Building 2800, Edwards AFB, CA, 93524 not later than September 21, 2011 at 11:30AM PST.