Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SIGNAL PROCESSOR UN

Active
SPE7M9-26-Q-0034Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 20 units of a Signal Processor UN with NSN 6625-01-241-7043 under solicitation SPE7M9-26-Q-0034, with a delivery requirement of 750 days after order. The solicitation is issued by the Department of Defense, specifically the Electrical Devices Division, and is subject to strict cybersecurity and compliance standards including CMMC Level 2 certification for any third-party assessment organization involved. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issuance or award date depending on acquisition scale. The item contains technical data subject to export controls under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, whether in the U.S. or abroad, and mandates that only contractors approved by DLA with JCP certification, completed export control training, and approved access may handle the data. DFARS 252.225-7048 applies to the protection of this controlled technical data. Additional requirements include adherence to DLA packaging standards, removal of government identification from rejected supplies, inspection and acceptance at the origin, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, and all responses must be submitted by August 3, 2026, with Jennifer Hopkins listed as the primary point of contact.

General Info

Procure 20 Signal Processors, NSN 6625-01-241-7043, deliver in 750 days, CMMC Level 2, ITAR/EAR controlled, DLA New Cumberland, PA.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Jennifer Hopkins
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SIGNAL PROCESSOR UN
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTHIN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THEWEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER INEFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERSAND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item hastechnical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) orthe Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department ofState or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether locatedin the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreignsubsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution ofexport-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification,have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-ControlledTechnical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controllingauthority to access the export-controlled data. NSN/Part Number: 6625-01-241-7043 Quantity: 20 EA Purchase Request: 7009807454QTY: 20 Delivery: 750 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334514
New
DIBBS
PROBE, TEST
Solicitation # SPE7M2-26-T-5787
NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
Federal
NAVIGATIONZLGHTZWHI
Solicitation # N0010426QFF39
This contract pertains to the procurement of a NAVIGATION LIGHT WHITE designated as SPECIAL EMPHASIS Material (Level I), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to NAVSEA drawings 5486638 and 5486639, with all non-metallic components meeting NAVSEA SS800-AG-MAN-010/P-9290 toxicity and flammability standards. Mandatory testing includes a 10-cycle submersion pressure test at 134 psig with specific dwell times, or an alternative 1500 psig one-hour hydrostatic test per MIL-DTL-24560, with pressure tolerances tightly controlled based on test range and gauge graduation. All threads must be inspected per FED-STD-H28 System 21 or equivalent, and mercury or mercury-containing compounds are strictly prohibited. The contractor must maintain ISO-9001 quality system compliance with ISO-10012 and ISO/IEC 17025 calibration standards, or an acceptable MIL-I-45208 and MIL-STD-45662 alternative, subject to government audit and source inspection. All deliverables require full traceability from raw material to final component via permanent markings, documented through Objective Quality Evidence (OQE), with records preserved for at least seven years. Certification of Compliance must be unqualified, 100% inspected, and include detailed documentation of test parameters, gage calibration, and authorized signatures. Sampling follows a zero-defect acceptance criterion, with 100% verification of all test reports and traceability links. Government Source Inspection is required at the contractor’s facility, and subcontractors must be contractually bound to the same quality controls. Delivery is FOB destination, with final shipment contingent on prior submission and acceptance of certification data by Portsmouth Naval Shipyard via WAWF, using specified SHIP TO, INSPECT BY, and ACCEPT BY codes and email notifications. The contract mandates compliance with Buy American and Defense Priorities and Allocations System (DPAS) requirements, prohibits unauthorized deviations without written approval from the Contracting Officer, and requires all ECPs and waivers to be processed through ECDS, with final documentation submitted via WAWF. The solicitation is a total small business set-aside with a response deadline of September 4, 2026, and access
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334514
New
SLED
Distance Meter
Solicitation # 645-RFQ-2967-2027
The Iowa Department of Transportation is soliciting competitive quotes for a Distance Meter under solicitation number 645-RFQ-2967-2027, with responses due by July 31, 2026, at 6:00 PM Central Time. The solicitation was posted on July 28, 2026, and is open to all qualified vendors without set-aside restrictions. The contract is managed by the Iowa DOT’s Transportation division, with performance expected to take place in Story County, Iowa, and correspondence should be directed to Tanner Thomsen, the primary point of contact, via email at tanner.thomsen@iowadot.us or phone at 515-233-7829. The official bid opportunity can be reviewed online through the Iowa DOT’s procurement portal, and all submissions must comply with the terms outlined in the solicitation to be considered for award.
Transportation

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334514
New
SLED
Refrigeration Monitoring System Design and IntegrationThe contract pertains to the engineering and integration of environmental monitoring systems specifically designed for refrigeration units across facilities operated by the Texas Department of Criminal Justice. It involves the deployment of IoT sensors to continuously collect data on temperature, humidity, and other critical environmental parameters, with seamless integration into existing SCADA and BMS platforms to enable real-time monitoring, alerts, and data analytics. The work is focused on ensuring compliance with regulatory standards for food storage and medical supply preservation within correctional facilities, requiring robust system design that accommodates diverse infrastructure and operational environments. Subcontracting activity is authorized under NAICS code 334514, indicating a focus on industrial and commercial hvac and refrigeration equipment manufacturing, though the deliverables center on system integration rather than hardware production. The solicitation is open for responses until August 11, 2026, with no set-aside provisions specified. Performance will occur across multiple TDCJ locations statewide, though exact site details are not provided. All technical execution must align with the agency’s operational requirements, emphasizing reliability, cybersecurity, and remote accessibility for facility personnel. Interested parties must submit proposals through the TX SMARTBUY portal by the stated deadline.
Texas Department of Criminal Justice

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
Signal Processor Unit Manufacturing & AssemblyThe contract requires the complete design, fabrication, integration, testing, and delivery of 11 military-spec Signal Processor Units that must fully comply with Defense Logistics Agency standards, all applicable MIL-STD specifications, and strict U.S. export control regulations. These units are critical for defense applications and must meet exacting performance, durability, and security requirements to ensure operational readiness in field-deployed environments. The work is scoped under a subcontract arrangement with a firm deadline for responses by August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The effort falls under NAICS code 334514, which classifies it within the electronic component and product manufacturing sector, and is administered by the Department of Defense through its Maritime Supply Chain organization. While no specific set-aside or small business preferences are indicated, full compliance with governmental defense standards is mandatory, and all deliverables must be traceable, documented, and certified to meet defense-grade quality and security protocols. The contract is publicly available through the DIBBS system with the solicitation reference SPE7M126T236R, and any prospective bidder must ensure alignment with all federal, military, and export compliance obligations before submission.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
SIGNAL PROCESSOR UN
Solicitation # SPE7M1-26-T-236R
The contract pertains to the procurement of 11 units of a Signal Processor under NSN 6625-01-241-7043, issued by the Department of Defense through the Maritime Supply Chain organization. It is governed by stringent cybersecurity and quality standards, including mandatory CMMC Level 2 certification for third-party assessors and adherence to the DLA Master List of Technical and Quality Requirements. The technical data associated with this item is subject to export controls under either ITAR or EAR, restricting any disclosure or transfer to foreign persons, including foreign nationals within the U.S., and requiring prior governmental authorization for export. Only contractors with approved JCP certification, completed DOD export control training, and explicit DLA approval may handle this data. Additional requirements include compliance with DLA packaging guidelines, removal of government identification from rejected items, inspection and acceptance at the manufacturer’s origin, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. The solicitation, numbered SPE7M1-26-T-236R, was posted on July 28, 2026, with a response deadline of August 10, 2026, and a delivery window of 859 days after delivery order issuance. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The NAICS code 334514 categorizes the procurement under navigation, measurement, and control instrument manufacturing. The primary point of contact for inquiries is Bernadine Davis-Sheets, reachable via email and phone, and all submissions must be made through the DIBBS portal. The contract type is a solicitation with no set-aside designation, and it applies Federal procurement rules without exception, emphasizing compliance with regulatory, security, and logistical mandates from the Defense Logistics Agency.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
BORESIGHTING EQUIPM
Solicitation # SPE4A6-26-T-08BJ
The contract covers the delivery of two units of bore sighting equipment, identified by NSN 4920015504853 and part number 5750010100-1, manufactured by Essex Industries Inc. with CAGE code 83533, in accordance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. The item is classified as a critical application and is subject to stringent quality controls including sampling per MIL-STD-1916 or ASQ H1331, with zero non-conformances required in sampled lots unless otherwise specified, and non-critical attributes treated as major unless defined otherwise in governing documents. Packaging and marking must strictly comply with MIL-STD-129 and ASTM D3951, though DLA requirements supersede the latter; palletization must adhere to RP001, and all shipping labels must be properly formatted with correct Unit of Issue and Quantity per Unit Pack. While IUID compliance per MIL-STD-130 is typically mandated, it is explicitly waived for this contract under DFARS 252.211-7003(c)(1)(i). The contractor must adhere to cybersecurity requirements including CMMC Level 2 self-assessment and comply with DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on covered telecommunications equipment under DFARS 252.204-7018 and hexavalent chromium restrictions under DFARS 252.223-7008. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129, and no storage, treatment, or disposal of toxic materials is permitted on government installations without prior written authorization. Delivery is scheduled to occur within 158 days after order, with FOB Origin terms, and all items must be delivered to the designated DLA distribution facility in New Cumberland, Pennsylvania. Payment is exclusively processed through WAWF, with paper invoices prohibited unless system failure occurs. The solicitation is a total small business set-aside under NAICS code 334514, requiring offerors to submit valid UEI and CAGE codes and accurately represent their size and socioeconomic status; no pricing details are provided in the solicitation. All contract clauses
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334514
New
DIBBS
VOLTMETER
Solicitation # SPE7M0-26-T-021C
The contract pertains to the procurement of one voltometer with NSN 6625-01-680-6309 and part number 083-75VB-RSRS-C6, issued under solicitation SPE7M0-26-T-021C by the Department of Defense through the Maritime Supply Chain ESOC Buys organization. Delivery is required within five days of award, FOB origin, to the designated receiving facility at Tobyhanna Army Depot in Pennsylvania, with shipment required via the fastest traceable means excluding parcel post. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and the contract incorporates Defense Logistics Agency packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes applied. The voltometer may contain batteries, triggering additional handling and compliance protocols, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The unit of issue is EA, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s procurement requirements including palletization, container codes, and preservation methods as specified. The point of contact for inquiries is Gerard Quinn, and the response deadline for the solicitation is August 10, 2026, with an original required delivery date of July 27, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
NRP, OSCILLOSCOPE AS
Solicitation # SPE7M0-26-T-019E
This contract is for the procurement of one unit of a NRP oscilloscope with NSN 6625-01-620-5187, issued under solicitation SPE7M0-26-T-019E by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of contract award, with FOB destination as the delivery term and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the item must be packaged in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, including compliance with MIL-STD-129 marking standards and specific preservation, packaging, and container codes. The oscilloscope must conform to technical drawing revisions dated May 5, 2022, and is subject to cybersecurity maturity model certification Level 2 self-assessment and requirements for covered defense information. The item may contain batteries and must be shipped by traceable means, not parcel post, to the USS Essex LHD 2 at FPO AP 96643. All technical and quality requirements are governed by the DLA Master List, and configuration changes require formal engineering change proposals or variance requests. The original required delivery date is July 24, 2026, and full and open competition applies. The point of contact is Gerard Quinn, with the contract managed under government-specific tracking codes for processing and distribution.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
MULTIMETER
Solicitation # SPE7M0-26-T-009B
This contract solicits 40 units of a multimeter with National Stock Number 6625-01-664-0668, manufactured by Extech Instruments Corporation under part number EC600, under a Total Small Business Set-Aside (FAR 19.5) for NAICS Code 334514. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, requires delivery within five days of award to the Naval Air Warfare Center Weapons Division in China Lake, California, with FOB Origin terms and shipment by the fastest traceable means—parcel post is prohibited. The item is classified as a Type I (Code H) shelf-life item with a non-extendable 12-month shelf life and must comply with MIL-STD-2073-1E packaging standards, including QUP 001, preservation method 41, and pack code U, with marking adhering to MIL-STD-129 and no special marking required. Palletization must follow DLA’s RP001 requirements. The offeror must provide a completed Safety Data Sheet and OSHA-compliant hazard communication label at the time of quotation if the product contains hazardous materials as defined by FED-STD-313 and FAR 52.223-3, and must update this information during contract performance if additional hazardous components are identified. The multimeter may contain batteries, and the contractor bears full liability for safety of personnel and property regardless of compliance. The contract incorporates DLA’s Master Solicitation for Automated Simplified Acquisitions Revision 105 with applicable FAR and DFARS clauses, including NIST SP 800-171 cybersecurity requirements (Deviation 2026-O0025), subcontracting rules for commercial items (Deviation 2026-O0015), and mandates compliance with the Berry Amendment and Buy American Act. The award may be made to a HUBZone small business using price evaluation preference, and automated award may apply. Contractors must be registered in SAM, submit invoices via WAWF, and maintain electronic business contact information. The bid deadline is July 27, 2026, and proposals must be submitted through the DLA Internet Bid Board System. Certification of cost or pricing data is required under DFARS deviation 2026-00048, and the item
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 334514
New
DIBBS
TESTER, VIBRATION SE
Solicitation # SPE7M0-26-T-8374
The contract pertains to the procurement of one unit of a Vibration Tester, Model REF2510R, assigned NSN 6625-01-674-9205, sourced from AMPHENOL (MARYLAND) INC. The item is subject to DLA packaging requirements as outlined in RP001, with specific packaging standards aligned to MIL-STD-2073-1E and marking in compliance with MIL-STD-129; no special markings are required. Delivery is FOB destination within five days of contract award, with zero tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item may contain batteries, and government identification must be removed from any non-accepted supplies. Shipping must be conducted via the fastest traceable means, explicitly prohibiting parcel post, and directed to the FPO address USS CARL VINSON CVN 70, with shipment logistics governed by DLAD PROC NOTES C19 and C20. The contract reference SPE7M0-26-T-8374, issued by the Department of Defense’s Maritime Supply Chain ESOC, specifies the required delivery date as May 20, 2026, and includes detailed technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements. The point of contact for inquiries is Gerard Quinn, with a DIBBS link provided for solicitation details, and the NAICS code 334514 identifies the classified industry sector for the equipment.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 334514
New
International
23375-250365-B RFP Humidification and Dehumidification Control Unit
Solicitation # WS4691799023
This solicitation, numbered WS4691799023, seeks the supply and delivery of one humidification and dehumidification control unit to be delivered to Ottawa, Ontario, with a required delivery date no later than March 31, 2027. It supersedes the prior solicitation dated October 17, 2024, which had a closing date of December 11, 2024, and all submissions must be received by the new deadline of August 18, 2026, at 7:00 PM EST; late responses will not be accepted. Only Canadian suppliers and suppliers from eligible trading partners may respond, in accordance with reciprocal procurement policies. Offerors are required to use environmentally preferable packaging to align with Public Works and Government Services Canada’s commitment to reducing plastic waste and promoting sustainable procurement practices. Debriefings are available upon request to bidders who participated in the previous solicitation. The solicitation is managed by the Government of Canada through Public Works and Government Services Canada, with Pam Munz designated as the primary point of contact for inquiries.
Department of Public Works and Government Services

POSTED

3 days ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M9-26-T-0032
The contract specifies the procurement of 13 units of an alternating current motor with part number E6440M3 and NSN 6105-00-808-1587, under solicitation SPE7M9-26-T-0032, with a required delivery within 84 days of the award date. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA-specific packaging guidelines under RP001. The item is classified as a critical application item and must meet stringent verification standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise directed. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The contractor must adhere to cybersecurity compliance under CMMC Level 2 Self-Assessment and satisfy documentation requirements for source approval and test equipment calibration. Unit of issue is each (EA), with no quantity variance permitted, delivery is FOB origin, and inspection and acceptance occur at the destination. The delivery address is Hill Air Force Base, Utah, with a need ship date of November 3, 2026, and original required delivery by December 10, 2027. The contract includes no requirement for Item Unique Identification per DFARS 252.211-7003(c)(1)(i), and government identification must be removed from non-accepted supplies. All shipments must follow DLA transport procedures C19 and C20.
Motor and Generator Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5640
Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with any hardware or supplies provided under this contract, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specifically authorized by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and equipped with a secondary containment boundary to prevent leakage, in compliance with NAVSEA 5100-003D. All packaging and preservation must adhere to ASTM-D3951 for commercial packaging and MIL-STD-2073-1E for military standards, with marking in accordance with MIL-STD-129 and no special marking required. The item, a switch and toggle with NSN 5930-01-507-0364, is to be delivered in a single unit within 20 days FOB destination, with zero variance allowed in quantity and inspection occurring upon arrival. Delivery must be made via the fastest traceable means, not parcel post, to the specified FPO address for USS GERALD R FORD CVN 78, referenced under RDD 777 and shipment code V2317361332C91. The contract is governed by DLA packaging and quality requirements incorporated by reference from the DLA Master List, with the applicable revision determined by the solicitation or award date. The sole point of contact is Dondiego Boler, with the solicitation issued under SPE7M8-26-T-5640 and a response deadline of August 10, 2026, for delivery required by July 27, 2026.
Other Electronic Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE7M8-26-T-5636
The contract pertains to the procurement of a liquid level switch with NSN 5930-00-008-0547 and part number LS-30556 manufactured by SETRA SYSTEMS, INC., under solicitation SPE7M8-26-T-5636. A total of 14 units are required at a unit price of $14.00, with a total contract value of $196.00, delivered FOB origin within 227 days from the solicitation date. The item is classified as a critical application item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specified functional uses such as batteries, fluorescent lamps, sensors, or analytical reagents, and even then, portable devices must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with explicit prohibition of mercury in any packaging or marking materials. Delivery is to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS code 334418, with a response deadline of August 10, 2026, and a required delivery date of April 13, 2027, though the ship date is set for March 26, 2027. Quantities must be delivered exactly as specified with zero variance permitted.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5634
The contract is for a single thermostatic switch with NSN 5930-01-244-7403, requested under purchase request 7017659250, with a delivery requirement of 20 days ADO. The solicitation number is SPE7M8-26-T-5634, issued by the Electrical Devices Division of the Department of Defense, and the response deadline is August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The procurement is subject to DLA packaging requirements, and the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is identified as FPO with ZIP code 96662, and the point of contact is Dondiego Boler, reachable at the provided email and phone number. No government identification removal requirements are specified, and no set-aside type is designated for this solicitation.
Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
ARM, SWITCH ACTUATOR
Solicitation # SPE7M8-26-T-5639
The contract pertains to the procurement of two ARM SWITCH ACTUATORS with NSN/Part Number 5930-01-685-0717, under solicitation SPE7M8-26-T-5639, with a delivery requirement of 20 days after contract award. The item is subject to strict cybersecurity compliance, requiring the supplier to be a CMMC Level 2 Certified Third-Party Assessment Organization. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The product must comply with DLA packaging standards and must not contain any Class I ozone-depleting chemicals; substitutions require prior approval unless explicitly authorized by specifications. The item is subject to export control under ITAR or EAR, and any handling or disclosure of technical data to foreign persons, including employees of foreign subsidiaries, requires prior authorization and compliance with DFARS 252.225-7048. Access to export-controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DLA training, and formal authorization from the DLA controlling authority. Government identification must be removed from non-accepted supplies, and the item has no shelf life requirement. The point of contact for the procurement is Jamir Prattis of the Department of Defense’s Electrical Devices Division.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5637
The contract pertains to the procurement of a thermostatic switch identified by NSN 5930-01-502-6196 and part number EA-00411-0, with a quantity of 107 units to be delivered within 44 days from the original required delivery date of December 10, 2026. Delivery is FOB origin and inspection and acceptance occur at the destination point. The supplier must comply with strict packaging and preservation standards including MIL-STD-2073-1E and ASTM-D3951, with marking adhering to MIL-STD-129 and no special marking required. All components must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or specific chemical reagents as authorized by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract references DLA’s master list of technical and quality requirements for incorporated technical and quality standards, with revisions controlled by the solicitation or award date depending on acquisition type. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation guidelines are governed by DLAD Proc Note C19 and C20. The contract has a firm unit price of $107.00 per unit, with zero variance allowed in quantity, and is issued under solicitation SPE7M8-26-T-5637, with a response deadline of August 10, 2026, and a posting date of July 29, 2026.
Saw Blade and Handtool Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541611
New
DIBBS
Small Business & Socioeconomic Compliance SupportThe contract seeks support services to assist the prime contractor with small business representations, certifications, and ongoing reporting related to federal socioeconomic programs including Women-Owned Small Business, Service-Disabled Veteran-Owned Small Business, and HUBZone designations. The work involves ensuring accurate and compliant documentation and adherence to all regulatory requirements tied to these programs, which are critical for maintaining eligibility and achieving set-aside contract advantages. The subcontractor must be well-versed in federal acquisition regulations governing socioeconomic status verification and possess the capability to manage dynamic certification renewals and reporting obligations. Performance is to be carried out in support of the Department of Defense’s Electrical Devices Division, with the place of performance listed as FPO, ZIP 09573, indicating potential operations conducted overseas or in a military postal location. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, under a subcontracting arrangement with a NAICS code of 541611, which corresponds to Management Consulting Services. While no set-aside designation is specified, the nature of the task inherently requires familiarity with small business compliance frameworks and the ability to support the prime contractor’s federal contracting posture through accurate and timely administrative processes.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484121
New
DIBBS
Logistics & Destination Delivery ServicesThe contract requires the packaging, shipping, and delivery of a pressure switch to FPO ZIP 09573 aboard the USS GUNSTON HALL LSD 44 under FOB DESTINATION terms, meaning the seller assumes all risks and costs until the item reaches the specified military destination. The service is classified as a subcontract under NAICS code 484121, which pertains to truck transportation for local and long-distance hauling. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is managed by the Electrical Devices Division within the Department of Defense. Delivery must be coordinated to reach the designated military vessel at the FPO address, ensuring compliance with military logistics protocols and timelines.
General Freight Trucking, Long-Distance, Truckload

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires full compliance with OSHA and federal regulations for the identification, documentation, and labeling of all hazardous materials used in or with pressure switches. This obligation applies to every stage of handling, storage, and integration of such materials, ensuring that all safety and regulatory standards are met without exception. All documentation must be accurate, up to date, and readily accessible to authorized personnel to support inspections and audits. The solicitation is issued under the NAICS code 541690 as a subcontract by the Department of Defense’s Electrical Devices Division, with performance required at FPO, 09573. Interested parties must submit responses by the deadline of August 10, 2026, and the scope of work demands strict adherence to regulatory protocols to ensure worker safety and legal compliance. Failure to meet these requirements may result in non-compliance penalties or contract termination.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Precision Electromechanical Component ManufacturingThe contract involves the manufacture and delivery of a single precision pressure switch compliant with military specifications, encompassing full lifecycle activities from design validation through final certification. This includes the sourcing of all required components, assembly in a controlled environment, rigorous testing to ensure performance under extreme conditions, and formal documentation to verify adherence to defense standards. The work must be executed to meet exacting reliability and durability requirements typical of military-grade electromechanical systems. This is a subcontract under the NAICS code 335931 for other electrical equipment and component manufacturing, issued by the Electrical Devices Division of the Department of Defense. The place of performance is designated as FPO 09573, indicating operation in a military postal area, likely overseas or on a naval vessel. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, allowing potential suppliers a brief window to submit proposals. The contract is structured to ensure a single, fully compliant unit is delivered with complete traceability and certification, suitable for critical defense applications.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541211
New
DIBBS
Government Invoicing & WAWF Submission ServicesThe contract requires the preparation and electronic submission of invoices through the Wide Area Workflow system to facilitate timely payment processing for services rendered under a subcontract arrangement with the Department of Defense. The work is specifically tied to the Electrical Devices Division and must be performed at the designated place of performance in Tracy, California, with the ZIP code 95304-5000. The North American Industry Classification System code 541211 indicates that the services fall under accounting, tax preparation, bookkeeping, or payroll services, confirming the administrative and financial nature of the deliverables. Interested parties must respond by the deadline of August 10, 2026, with all submissions required to comply with WAWF protocols and government payment standards. The solicitation is open for subcontracting and does not specify any set-aside status.
Offices of Certified Public Accountants

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging and Marking ServicesThe contract requires the provision of compliant packaging and marking services for switch units in accordance with military standards, ensuring all units are properly prepared for shipment to the Defense Logistics Agency. The work must adhere strictly to applicable Department of Defense requirements for handling, labeling, and containment to meet operational and logistical specifications for military use. The performance location is in Tracy, California, with a zip code of 95304-5000, indicating the physical area where the packaging and marking activities must be executed. This is a subcontract under NAICS code 561910, categorized under other support services, and is issued by the Electrical Devices Division of the Department of Defense. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, indicating a competitive bidding window of approximately two weeks. While no specific set-aside type is indicated, the contract is intended for fulfillment under a subcontract arrangement, suggesting the successful bidder will operate under a prime contractor’s umbrella. All activities must be completed to ensure seamless integration into the military supply chain without delay or noncompliance penalties.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details